 |
Register Login |
 |
|
 |
- Home
- About Us
- Equipment Search
- Plant Search
- Industrial Real Estate
- Bromborough, England
- Bloomsbury, New Jersey
- Coventry, Rhode Island
- Fitchburg, Massachusetts
- Florence, South Carolina
- Liverpool, England
- Lowell, North Carolina
- Niagra Falls, New York
- Penuelas, Puerto Rico
- University Park, Illinois
- Sell to IPP
- News
- Media
- Contact Us
|
|
 |
|
Need Help? or Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Agitator Drives Agitator drives mount on top of reactor or tanks to provide agitation to the contents of the vessel. There are many different manufacturers of Agitator Drives.
Agitator Drives for alloy vessels and reactors are rated by horsepower. The Agitator Drives for Glass Lined vessels and reactors have specific types and manufacturers. IPP specializes in the various types of agitator drives for glass-lined vessels and reactors.
|
|
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 17 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 82441 | AGITATOR DRIVE | SHAFT | 1008 | UNUSED 1 1/2" dia x 102" long 316SS agit shaft. (1) 3-blade propellor. Has flange for bolting to stub shaft. Flange 1 1/2" ID, 4 1/2" OD, 4-bolt holes. |
|
|
| 210801 | AGITATOR DRIVE | SHAFT | 3107 | 3.5" X 107", Titanium, set of agitator shafts with hubs and paddles. Shafts are broached for key ways, 0.5" wide x 6.25"long on one end and 0.75" wide x 13" long on the other end. Hubs are four blade design, 8' high, by 19.75' across and 0.75 thick. Blades are 0.5" thick by 26.5" long by 9.75" high. Blades bolt to hub with 1/2" bolts. |
|
|
| 212621 | AGITATOR DRIVE | SHAFT | 3 | 3.5” diameter x 155” long, Hastelloy “C”, agitator shaft. Designed for use in a 4,000 gallon alloy reactor. 8.5” diameter x 1.5” bolting flange with 8; 3/8” bolt holes. Two shaft keyways 7/8” wide x ½” deep x 28” long. Initially designed for paddle type agitator blades, two available with this unit. Paddles are 9” long x 7.25’ high x 0.25” thick. These paddles mount on a circular plate 24 ¾” diameter designed to accept eight blades. |
|
|
| 216137 | AGITATOR DRIVE | SHAFT | 3X160 | UNUSED,3.25" diameter x 160 " ;long, Hastelloy C-276 agitator shaft. Singe end mount with one 6" hub. |
|
|
| 216138 | AGITATOR DRIVE | SHAFT | 3X160 | UNUSED,3.25" diameter x 160 " ;long, Hastelloy C-276 agitator shaft. Singe end mount with one 7" triangular hub. |
|
|
| 217529 | AGITATOR DRIVE | SHAFT | 05x158 | 135mm diameter x 4030mm total length blue glass lined agitator shaft, 1m span, |
|
|
| 217531 | AGITATOR DRIVE | SHAFT | 03x090 | 85mm diameter x 2.3m total length blue glass lined agitator shaft, 650m span, |
|
|
| 217541 | AGITATOR DRIVE | SHAFT | 03x098 | 80mm diameter x 2.5m total length blue glass lined agitator shaft, approx 850mm span, |
|
|
| 217544 | AGITATOR DRIVE | SHAFT | 04x090 | 110mm diameter x 2.3m total length white glass lined agitator shaft, 500mm span, |
|
|
| 217545 | AGITATOR DRIVE | SHAFT | 06x175 | 165mm diameter x 4450mm total length white glass lined agitator shaft, approx 1.3m span, |
|
|
| 217551 | AGITATOR DRIVE | SHAFT | 7803 | 90mm diameter x 2m total length blue glass lined agitator shaft, 625m span, |
|
|
| 217561 | AGITATOR DRIVE | SHAFT | 7703 | 90mm diameter x 1970mm total length blue glass lined agitator shaft, |
|
|
| 217569 | AGITATOR DRIVE | SHAFT | 12005 | UNUSED 135 mm diameter x 3070mm total length white glass lined agitator shaft, approx 1m span |
|
|
| 217570 | AGITATOR DRIVE | SHAFT | 12005 | UNUSED 135 mm diameter x 3070mm total length white glass lined agitator shaft, approx 1m span |
|
|
| 217571 | AGITATOR DRIVE | SHAFT | 18305 | UNUSED 135 mm diameter x 4650mm total length white glass lined agitator shaft, |
|
|
| 217573 | AGITATOR DRIVE | SHAFT | 14204 | 110 mm diameter x 3620mm total length white glass lined anchor agitator shaft, 1750m span |
|
|
| 217574 | AGITATOR DRIVE | SHAFT | 14204 | 110 mm diameter x 3620mm total length white glass lined anchor agitator shaft, 1750m span |
|
|
|
|
IPP Sales Contacts
|
 |
|
Keith West Global Sales KeithW@ippe.com +1 609 838 5931 | Amanda Vagell Global Sales AmandaV@ippe.com +1 609 838 5929 | Patti Buchman Global Sales PattiB@ippe.com +1 609 838 5928 | Ray Wagner Global Sales RayW@ippe.com +1 609 838 6043 | Regina Zarmer Europe Sales & Acquisitions ReginaZ@ippe.com +49-306-594-2445 Office +49-172-313-8439 Mobile +49-30-6594-2448 Fax | Jo Petrie, Sales Engineer UK, Scandinavia, Spain, & So.Africa jop@ippe.com +44 (0)1642 367 910 Office +44 (0)1642 367 913 Direct +44 (0)7770 748884 Mobile +44 (0)1642 367 920 Fax | Bohumil Cuta, E. Europe Sales & Acquisitions BohumilC@ippe.com +42-054-821-6680 Office +42-060-273-7517 Mobile +420-5-481-22240 Fax | Elisa Lucumi Central & So. America Sales ElisaL@ippe.com +1 609 838 5927
|
|
|
|
|
|
|
|
|
|
Home | About Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | News | Media | Contact Us
|
Copyright 2002-2010 International Process Plants
Terms Of Use
Privacy Statement

|
|
 |