 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Agitator Drives  Agitator drives mount on top of reactor or tanks to provide agitation to the contents of the vessel. There are many different manufacturers of Agitator Drives.
Agitator Drives for alloy vessels and reactors are rated by horsepower. The Agitator Drives for Glass Lined vessels and reactors have specific types and manufacturers. IPP specializes in the various types of agitator drives for glass-lined vessels and reactors.
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 5054 | AGITATOR DRIVE | DRIVE | 8 | UNUSED 8.2 HP rating, Jones right angle triple reduction spiral bevel gear agit drive. Type 10TBV, vert downshaft configuration. Rated 8.2 HP @ 1020 rpm input speed, ratio 104:1. Will take 20 HP @ 1750 rpm input. |
|
|
| 5055 | AGITATOR DRIVE | DRIVE | 20 | UNUSED 20.8 HP rating, Jones right angle triple reduction spiral bevel gear agit drive. Type 10TBV, vert down shaft configuration. Rated 20.8 HP @ 1600 rpm input speed, ratio 68:1. UNUSED 20.8 HP rating, Jones right angle triple reduction spiral bevel gear agit drive. Type 10TBV, vert down shaft configuration. Rated 20.8 HP @ 1600 rpm input speed, ratio 68:1. |
|
|
| 5089 | AGITATOR DRIVE | DRIVE | 8 | UNUSED 8.5 HP Jones right angle triple reduction, spiral bevel gear agit drive. Type 12BTV, vert downshaft. Rated 8.5 HP @ 1150 rpm input speed, ratio 193.06:1. |
|
|
| 5090 | AGITATOR DRIVE | DRIVE | 8 | UNUSED 8.07 HP Jones right angle triple reduction, spiral bevel gear agit drive. Type 12BTV, vert upshaft. Rated 8.07 HP @ 600 rpm input speed, ratio 105.997:1. |
|
|
| 5123 | AGITATOR DRIVE | DRIVE | 30 | 30 HP Chemineer agit drive. 1800 rpm, 37 rpm output. Shovel type motor mount, steel stub shaft. Mdl #7HTD-30, SN 1257105. |
|
|
| 7963 | AGITATOR DRIVE | DRIVE | 1 | 1/.5 HP, 2-speed Lightnin agit drive. Mdl N33-1.00. 3/60/208/1750/880 rpm TEFC motor. 15 degree angle mtd frame. -1: SN 6213766 w/CS coupling. -2: SN 6213767 w/SS coupling. |
|
|
| 8587 | AGITATOR DRIVE | DRIVE | 7 | UNUSED 7.7 HP Jones right angle triple reduction, spiral bevel gear agit drive. Type 18BTV, vert downshaft. Rated 7.7 HP @ 960 rpm input speed, ratio 104.306:1. |
|
|
| 10045 | AGITATOR DRIVE | DRIVE | 15 | 15 HP Michigan Tool Co gear drive. Mdl SMV-45878-AJD, SN 12X. Ratio 15:1, 1750 rpm. Direct coupled to Reliance 15 HP, 3/60/220/440 volts, 1760 rpm TEFC motor, UL label, SN 28867A-KK. |
|
|
| 12507 | AGITATOR DRIVE | DRIVE | 15 | 15 HP Lightnin hydraulic driven agit drive. Mdl 78Q15V, SN -1, 7712106. Direct coupled w/15 HP Gyrol hydraulic drive, 1800 rpm output. Driven by 15 HP, 3/60/230/460 volt, 1755 rpm TEFC motor. 25 rpm final output. -1 rated 68.6 ratio. Heavy duty. |
|
|
| 12750 | AGITATOR DRIVE | GLASS DRIVES | 1 | 1 1/2 HP Pfaudler SB drive. Pinion drive to 1 1/2 HP, 3/60/220/440 volt, 1760 rpm motor. No seal or gland. Gearbox mtd on 52" long CS rails. |
|
|
| 12753 | AGITATOR DRIVE | DRIVE | 15 | 7.5/15 HP, 2-speed right angle agit drive. Direct coupled to 15/7.5 HP, 3/60/460 volts, 1775/886 rpm motor, UL label, C-flanged. W/mounting pedestal. 4-bolt square base. |
|
|
| 12767 | AGITATOR DRIVE | GLASS DRIVES | 5 | Approx 7.5/10 HP Pfaudler RLB agit drive. W/high duty stuffing box and mounting pedestal. No motor included. |
|
|
| 16199 | AGITATOR DRIVE | GLASS DRIVES | 10 | 10 HP Pfaudler 2-speed RLBH drive. Direct driven by 10/5 HP, 3/60/460 volt, 1700/890 rpm TEFC motor. W/mounting pedestal. No gland or seal. |
|
|
| 18010 | AGITATOR DRIVE | DRIVE | 10 | 10 HP Lightnin right angle down agit drive. SN 660967, Mdl 332-BEO-10.2. 25.6:1 ratio, 68 rpm output. W/direct coupled 10 HP, 3/60/220/440 volt TEFC motor. Drive has SS stub shaft (no gland or seal). Drive mounting base is 22" wide x 18" long. |
|
|
| 18011 | AGITATOR DRIVE | DRIVE | 10 | 10 HP Lightnin right angle down agit drive. SN 660968, Mdl 332-BEO-10.2. 25.6:1 ratio, 68 rpm output. W/direct coupled 10 HP, 3/60/220/440 volt TEFC motor. Drive has SS stub shaft (no gland or seal). Drive mounting base is 22" wdie x 18" long. |
|
|
| 18141 | AGITATOR DRIVE | GLASS DRIVES | 2 | 2 HP Pfaudler MB drive. Driven by 2 HP, 3/60/220/440 volt, 1750 rpm motor. No gland or seal. |
|
|
| 18143 | AGITATOR DRIVE | GLASS DRIVES | 2 | Pfaudler MB drive. No gland or seal. No motor. Requires 2-5 HP motor. |
|
|
| 18567 | AGITATOR DRIVE | DRIVE | PTE08 | 21 HP Phila PTO-8 agit drive. CS flange mtd. For closed tank mounting. 14.85:1 ratio. Mounting flange for 4" nozzle. No gland or seal. Belt driven by varidrive pulleys. Side mtd 15 HP, 3/60/220/440 volt, 1735 rpm TEFC flameproof motor, UL label. No shaft w/unit (for 3 1/2" shaft). |
|
|
| 21619 | AGITATOR DRIVE | GLASS DRIVES | 3 | 5.73 HP Pfaudler 3TW single reduction agit drive. Mdl SV-45989-AKC, SN 14586X. For closed tank mounting. 10:1 ratio, 1750 rpm input. Right angle design. Belt driven 5 HP, 3/60/220/440 volt, 1750 rpm motor, UL label. |
|
|
| 21620 | AGITATOR DRIVE | GLASS DRIVES | 5 | Approx 5 HP Pfaudler MB agit drive. |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|