| Product Description | 3000 liter(working capacity) 316SS, vertical, 550 PSI, autoclave/reactor system, bolt dished top, weld dished bottom, top section 5’ diameter x 4’ straight side, bottom section 3’9” diameter x 2’11” straight side, manufactured by Applied Fusions Ltd, serial # J6221, internal design pressure 550 psig + full vac @ 250 deg C, internal coil 90 psig @ 110 deg C, half pipe coil jacket 165 psig @ 200 deg C, internal operating pressure 500 psig + full vac @ 220 deg C, internal coil 80 psig @ 100 deg C, half pipe coil 150 psig @ 180 deg C, bottom section and dish with 3” 316 s/steel half pipe coil jacket, internal 316 s/steel 2” diameter heating/cooling coil with 14-turns, (4) internal baffles on sidewall, 316 s/steel agitator shaft with (2) 4-blade pitched paddles, mechanical seal, shaft driven by 4kw, 3/50/400-690 volt, motor, openings top: 1-6”, 1-3”, 2-2”, straight side: 2-2”, bottom; 1-3”, 2-2”, mounted on (4) lugs,
System with
(1) 2500ltr Pfaudler RA-60-2270 series glass lined reactor (slurry tank), weld dished top & bottom, 1524mm I.D x 1092mm straight side, internal design pressure 6.83 barg + full vac @ -19/+200 deg C, jacket 6.83 or 5.79 barg with full vac @ -29/+200 deg C, mechanical seal with lubricator, 6-blade pitched paddle type agitator, agitator shaft driven by 5.5/4 kw, 3/50/415 volt, 1440/720 rpm motor, beavertail baffle, openings top: 1-460 x 410mm manway, 2-150mm, 5-100mm, straight side: 2-75, 2-50mm, bottom: 1-100mm, 4-50mm, mounted on (4) lug
(1) 2500ltr Pfaudler Balfour glass lined reactor (holding tank), clamp dished top, weld dished bottom, 5' diameter x 3'9" straight side, Lightnin agitator drive, mounted on (4) legs
(1) 1.26 sqm s/steel jacketed horizontal plate pressure filter, type 45-S-9, manufactured by Euro-vent Calmic engineering ltd, cake space 1.03 cu ft (0.029 cu.m), serial # C98100, internal design pressure 4 barg @ -15/+165 deg C, jacket 6 barg @ -15/+165 deg C, (9) s/steel 440mm diameter x 45mm deep plates, clamp dished top, weld flat bottom, 532mm diameter x 558mm straight side body, mounted on (3) s/steel legs, body with insulation
(1) 7600ltr RA-84-6810 Pfaudler Balfour glass lined reactor, weld dished top and bottom, 2134mm inside diameter x 1677mm straight side, internal design pressure 3.86 kg/cm2g + full vac @ -15/+180 deg C, jacket 5.3 kg/cm2g @ -15/+180 deg C, operating internal pressure 3.5 kg/cm2g @ -10/+153 deg C, jacket 4.25 kg/cm2g @ -10/+153 deg C, blue glass 3115, 3-finger retreat curve agitator, driven by 15/10 kw, 3/50/415 volt, 1460/730 rpm motor, mechanical seal with s/steel lubricator pot, 2-finger up baffle, openings: top: 1-18" manway with cover, 2-6", 5-4", straight side 2-2", 1-1/2", bottom 1-4", 2-2", mounted on (4) c/steel lugs, |