RegisterLogin
Need Help? or
Have something for sale? USE THIS FORM:
First Name:  
Last Name:  
Email Address:  
Company Name:  
Telephone:  
Country:  
Message / Question (Required):  
 
     

Featured Equipment Minimize
Equipment Rotator image
Equipment Rotator image 1 of 10 Equipment Rotator imageEquipment Rotator imageEquipment Rotator image
70291
****UNUSED 26 sq ft (2.5 sq meter) titanium automatic chamber filter press for filtering suspension having 10-500 Kg/cu meter (.65-31.5 lbs/cu ft) solids content. Capable of performing in sequence the following operations: filtration, 1st cake pressing, cake washing, 2nd cake pressing, cake air drying and cake discharge. Filter press plates closing and clamping by (2) hydraulic cylinders acting in parallel on the (2) sides of a central hydraulic operated mech fixing wedge. Filtering area 2.5 sq meter (27 sq ft). Chamber volume: cake capacity total 0.11 cu meter (3.9 cu ft). (6) filtering plates. Max thickness of cake 35mm (1 3/8"). Max operating pressure 16 Kg/sq cm (228 psi). Operating temps: max -80 deg C (176 deg F); min -5 deg C (41 deg C). Hydraulic powerpak pressures: 150 Kg/sq cm (2130 psi) - plates clamping; 20 Kg/sq cm (284 psi) - valves operating. Total installed electric power 28.3 KW. Hydraulic powerpak; low pressure pump 1.1 KW; high pressure pump 3 KW. Filter belt drive 2.2 KW, pressing water pump 22 KW. Filter belt tensioning by hydraulic motor. Overall dimensions: length 2820mm (9'3"); width 2200mm (7'3"); height 2860mm (9'4-1/2"). Matl of construction: frame, plates table and upper counter plate - cast iron and weld CS structure; filter plates and integrated manifolds - titanium; valves (fabricated) - titanium; diaphragms - rubber, suitable for alkali and acid of up to 30% concentration @ 100 deg C; belt rollers - rubber lined CS cylinders; belt wash chamber - titanium; leakage vat - titanium.
Read More...
 
  

 

Used Blowers

Used BlowersBlowers are designed to move air, gases, or dry power products. Blowers are similar to compressors but instead of compressing the air or gas, blowers typically operate at less than 20 PSI, or 1 bar.

Main Types of Blowers

The main types of blower include; centrifugal, exhaust fans, and rotary blowers. Blowers are often rated according to the flow - Cubic Feet per Minute (CFM).

  • Centrifugal blowers are best for high volume and high pressure applications. Centrifugal blowers operate at speeds of 3,500 RPM or higher.
  • Exhaust fans are blowers designed to move air. The fan blades can be straight, forward-curved or backward curved depending on the type of application.
  • Rotary blowers are positive displacement type blowers. Many times pneumatic conveying systems that move dry powders are powered by rotary blowers.
Equipment Search

IPPE Used Process Equipment Search


Enter a product number or part of its description below and click SEARCH
  Search View Quote Contents


Finally, you may filter the results based on capacity below

    Narrow Results by Capacity

Add Checked to Quote
 Add to Quote Before Changing Page

40 Items ReturnedGo To Page: 12
  Stock NumberProductSub GroupCapacityDescription
Details
IPP Equipment Search Image 1821BLOWERCENTRIFUGAL 6000Mdl D12LR, Allis Chalmers single stage centrifugal blower/compressor. Designed for 6000 cfm at 6 psig max discharge pressure, 16" suction opening, 12" discharge. 3600 rpm operating speed. Driven by 200 HP, 460 volt, 3500 rpm motor.
Details
IPP Equipment Search Image 37532BLOWERCENTRIFUGAL1142311,423 acfm @ 23.67 psi, Roots CS centrifugal blower. SN HM603. Type MVI-64. Inlet pressure 14.2 psi, inlet temp 100 deg F. 3560 rpm. Driven by 600 HP, 3/60/2300 volt, 3574 rpm drip-proof motor.
Details
IPP Equipment Search Image 42976BLOWERCENTRIFUGAL70007,000 cfm Elliott centrifugal turbo blower. SN 1257. 24" dia inlet, 10" dia outlet. Unit direct driven by 1250 HP, 3/60/4000 volt General Electric motor. Blower approx 7' dia.
Details
IPP Equipment Search Image 42977BLOWERCENTRIFUGAL Elliott centrifugal turbo blower. Unit driven by approx 1500 HP turbine. Blower approx 8' dia.
Details
IPP Equipment Search Image 71648BLOWERCENTRIFUGAL CS Sunflo centrifugal blower. Mdl E950H, SN 79167905, Series B-3230. 4" inlet, 4" outlet. Direct coupled to 75 HP, 3/60/230/460 volt, 3540 rpm motor. 12" diameter rotor (turbine).
Details
IPP Equipment Search Image 90127BLOWERCENTRIFUGAL 3800****NEW UNUSED 3,800 scfm @ 9.5 psig, CS/SS centrifugal blower system, model FTB-RGS 1418 JV, serial # 91-2304-101B, mfd bye FLO-TRONICS, Houston-Texas with Rotary Lobe GAS pump, mfd by Roots, serial # 50290, Type Wispair. Inlet temp 135 deg F, inlet air 1758 icfm, inlet pressure 14.70 psia, discharge pressure 23.90 psia @ 516 rpm. Inlet nozzle 12", outlet nozzle 10". Arrangement: horiz case CS, impellor 304SS. W/Carbone ring air seal. 1. silencer: model SDS-10, part # 58-310-AZ, serial # 11018-92-1. 2. silencer: model RISY-10, part # 54-210-FH, serial # 11018-92-1. Motor data: 460V/191A/60HZ/1191 rpm, mfd by W/Marathon, model 150 HP # XK 449TTFS6589 AP, V-belt driven. System includes cooling air tower, model AA-2000-10, serial # 392-B2827-2, mfd by Xchanger Inc. Hopkins-Minnesota.
Details
IPP Equipment Search Image 90128BLOWERCENTRIFUGAL 3800****NEW UNUSED 3,800 scfm @ 9.5 psig, CS/SS centrifugal blower system, model FTB-RGS 1418 JV, serial # 91-2304-101A, mfd bye FLO-TRONICS, Houston-Texas with Rotary Lobe GAS pump, mfd by Roots, serial # 50289 RP71, Type Wispair. Inlet temp 135 deg F, inlet air 1758 icfm, inlet pressure 14.70 psia, discharge pressure 23.90 psia @ 516 rpm. Inlet nozzle 12", outlet nozzle 10". Arrangement: horiz case CS, impellor 304SS. W/Carbone ring air seal. 1. silencer: model SDS-10, part # 58-310-AZ, serial # 11018-92-2. 2. silencer: model RISY-10, part # 54-210-FH, serial # 11018-92-2. Motor data: 460V/191A/60HZ/1191 rpm, mfd by W/Marathon, model 150 HP # XD 449TTFS6589 AN, V-belt driven. System includes cooling air tower, model AA-2000-10, serial # 392-B2827-1, mfd by Xchanger Inc. Hopkins-Minnesota.
Details
IPP Equipment Search Image 103633BLOWERCENTRIFUGAL2253322,533 cfm (38,300 cu meter/hr) @ 6700mm Wg, Mdl SL6a radial blower. Mfd by Aktiengesellschaft Kohnle, Kopp and Kausch, SN 1106010. 8900 rpm, 831 KW, 1153 Kg/cu meter. 20" inlet, 16" outlet. Direct driven by 940 KW, Type 1LA3345, 10250 volt, 1485 rpm motor thru Voith speed increaser.
Details
IPP Equipment Search Image 103634BLOWERCENTRIFUGAL 1641416,414 cfm (27,900 cu meter/hr) @ 7500mm Wg, Mdl SL5a radial blower. Mfd by Aktiengesellschaft Kuhnle, Kopp and Kausch, SN 1104005. 11350 rpm, 630 KW, 1138 Kg/cu meter. 11" x 26" inlet, 10" outlet. Direct driven by 725 KW, Type 1L45335, 10250 volt, 1485 rpm motor thru Voith speed increaser.
Details
IPP Equipment Search Image 104953BLOWERCENTRIFUGAL 900900 acfm @ 12.1 psia, Hoffman CS centrifugal blower. Mdl 4205A, SN 1175026. 3500 rpm. 6" inlet, 6" outlet. Direct coupled to 30 HP, 3/60/230/460 volt, 3540 rpm TEFC motor.
Details
IPP Equipment Search Image 104956BLOWERCENTRIFUGAL 900900 cfm @ 12.1 psi, Hoffman CS centrifugal blower. Mdl 4205A. 3540 rpm. 6" inlet, 6" outlet. Direct coupled to 30 HP, 3/60/230/460 volt, 3540 rpm motor.
Details
IPP Equipment Search Image 204152BLOWERCENTRIFUGAL3FIMA high performance radial fan (V=0,11m³/s) with 10 kW ABB E-Motor; type RC1U80RBG GR360, serial number 2/F 69 896. Housing up to 9 bar pressure surge and Halar coated, impeller made of titanium! Shaft seal ring with turbo labirinth and sealing gas, motor data: 10 KW, 400V/17,3A/50Hz/2895rpm/EEx e II T3
Details
IPP Equipment Search Image 204153BLOWERCENTRIFUGAL3FIMA high performance radial fan (V=0,11m³/s) with 10 kW ABB E-Motor; type RC1U80RBG GR360, serial number 1/F 69 896. Housing up to 9 bar pressure surge and Halar coated, impeller made of titanium! Shaft seal ring with turbo labirinth and sealing gas! motor data: 400V/17,3A/50Hz//2895rpm/EEx e II T3
Details
IPP Equipment Search Image 204170BLOWERCENTRIFUGAL471HANSA radial fan, type EF 125-3X/R, material (CS), 800 m³/h by 3194 rpm with 2,5kW/50hZ/380V LOHER E-Motor
Details
IPP Equipment Search Image 208512BLOWERCENTRIFUGAL16601660 CFM CS Centrifugal Blower manufactured by New York Bower.Driven by a 15 hp motor running @ 1800 rpm. Part of Carrier fluid bed dryer Heating system IPPE stock # 208509.
Details
IPP Equipment Search Image 210014BLOWERCENTRIFUGAL23002300 cfm (max), cast steel multi-stage centrifugal blower/Exhauster, 400 CFM (min), manufactured by IGD Lamson, model 608-3-0-5-ADGI, serial # P001710, S.O # 11061, max pressure11.4 psi (0.79 bar), max vacuum 13.1 hg (333 mm hg), driven by a 22kw, 3/50/380/415/660/720 volt 2950 rpm or 25kw, 3/60/440/480 volt, 3540 rpm, 2-speed motor, 2-150mm openings, mounted on c/steel baseplate
Details
IPP Equipment Search Image 210205BLOWERCENTRIFUGAL475475 CFM CS Spencer Blower. Serial # 242613, Catalog # 2510-HMOD. Driven by a 10 HP, 3500 RPM Motor. Blower has a 6" inlet with a filter and a 6" flanged outlet. Rated for Differential pressure: 43, Inlet temprature: 70 degrees F., and inlet pressure: 14.7. Overall size is 3' high x 3' wide by 3.5' long.
Details
IPP Equipment Search Image 210290BLOWERCENTRIFUGAL0CS, Cycloneaire bulk solids centrifugal Blower, with Gardner Denver Duraflow blower. Skid mounted , Model # GGGAACA Serial # S01039, rated for 2650 max rpm. Driven by a Baldor 60 hp, 1760 rpm motor. Included on skid is air filter and silencer.
Details
IPP Equipment Search Image 213555BLOWERCENTRIFUGAL30003000 scfm at 8 psi, CS, centrifugal blower manufactured by Hoffman. Model # 65207B, serial # MO77660. Casing rated for 25 psi maximum working pressure. Standard nozzle orientation, 12" inlet, 10" outlet. Base mounted and direct coupled to a 200 hp at 3575 rpm Reliance AC electric motor. Rated for 460 volts, 219 amps, 60 hz, 3 ph. TEFC enclosure, and 445 TS frame.
Details
IPP Equipment Search Image 213556BLOWERCENTRIFUGAL30003000 scfm at 8 psi, CS, centrifugal blower manufactured by Hoffman. Model # 65207B, serial # MO77670. Casing rated for 25 psi maximum working pressure. Standard nozzle orientation, 12" inlet, 10" outlet. Base mounted and direct coupled to a 200 hp at 3575 rpm Reliance AC electric motor. Rated for 460 volts, 219 amps, 60 hz, 3 ph. TEFC enclosure, and 445 TS frame.
40 Items ReturnedGo To Page: 12

Add Checked to Quote
 Add to Quote Before Changing Page
  

IPP Sales Contacts Minimize

Keith West
Global Sales
Email Keith
Direct: 1-609-838-5931
Office: 1-609-586-8004

Amanda Vagell
Global Sales
Email Amanda
Direct: 1-609-838-5929
Office: 1-609-586-8004

Patti Buchman
Global Sales
Email Patti
Direct: 1-609-838-5928
Office: 1-609-586-8004

Ray Wagner
Global Sales
Email Ray
Direct: 1-609-838-6043
Office: 1-609-586-8004

Central Europe
Sales & Acquisitions

Regina Zarmer
Email Regina
Office: 49-306-594-2445
Mobile: 49-172-313-8439
Fax:   49-30-6594-2448

UK, Scandinavia, Spain & South Africa Sales & Acquisitions

Office: 44 (0)1642-367-910
Fax:    44 (0)1642-367-920

Jo Petrie
Email Jo
Direct: 44 (0)1642-367-913 Mobile: 44 (0)7770-748-884

Nicola Douglas
Email Nicola
Mobile: 44 7940 981 681

Eastern Europe
Sales & Acquisitions

Bohumil Cuta
Email Bohumil
Office: 42-054-821-6680
Mobile: 42-060-273-7517
Fax:    42-054-812-2240

Central & South America Sales

Elisa Lucumi
Email Elisa

Direct: 1-609-838-5927
Office: 1-609-586-8004

     

New/Unused & Exotic Alloy Heat Exchangers
Shell and Tube, Plate, Spiral

image of new unused alfa laval plate heat exchanger
image of titanium plate heat exchanger

Gas Fired CHP Cogen 10MW Power Plant

Burns Biogas, Landfill, Methane & Natural Gas

image of landfill gas chp cogen power plant

NEW/UNUSED HASTELLOY® C-276 Reactors.
Most Built 2011.

image of unused hastelloy c276 reactor

New Unused Sulzer Boiler Feed Water Pumps

image of unused surplus Sulzer MBN pump #214894
 

image of Unused Sulzer MBN pump #214895

Home | About Us | News | Contact Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | Mailing List | IPP's eBay Store | PDF Downloads | Events
  Copyright 2002-2012 International Process Plants   Terms Of Use  Privacy Statement   
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association National Demolition Association Turnaround Management Association Association Memberships
Bookmark and Share

Follow Us On Twitter View Our Channel on YouTube