 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Blowers  Blowers are designed to move air, gases, or dry power products. Blowers are similar to compressors but instead of compressing the air or gas, blowers typically operate at less than 20 PSI, or 1 bar.
Main Types of Blowers The main types of blower include; centrifugal, exhaust fans, and rotary blowers. Blowers are often rated according to the flow - Cubic Feet per Minute (CFM). - Centrifugal blowers are best for high volume and high pressure applications. Centrifugal blowers operate at speeds of 3,500 RPM or higher.
- Exhaust fans are blowers designed to move air. The fan blades can be straight, forward-curved or backward curved depending on the type of application.
- Rotary blowers are positive displacement type blowers. Many times pneumatic conveying systems that move dry powders are powered by rotary blowers.
|
|
IPPE Equipment Seach
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 31 Items Returned | Go To Page: | 1 | 2 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 18319 | BLOWER | EXHAUST FAN | 325 | Approx 325 cfm CS Buffalo volume fan. Size 32, Shop #63P6944. Driven by 1 HP, 3/60/220/440 volt, 3600 rpm motor, UL label. |
|
|
| 26730 | BLOWER | EXHAUST FAN | 30000 | Approx 30000 cfm, 100 HP, CS blower. Mfd by ILG Industries Inc, Size LP2037, SN D605194. Max rpm 890. 5' dia impellor, 36" inlet, 24" x 24" outlet. Requires 100 HP, 1750 rpm motor. |
|
|
| 32110 | BLOWER | EXHAUST FAN | 3000 | Approx 3,000 cfm @ 3" SP, 304SS Garden City exhaust fan. Size 8, Type RF, SN 80051. 6" dia inlet, 3 3/4" x 7" outlet. Approx 12" dia impellor. Direct driven by 7.5 HP, 3/60/460 volt, 3520 rpm motor. |
|
|
| 33302 | BLOWER | EXHAUST FAN | 3000 | 3,000 cfm @ 58" SP, 30" dia Buffalo FRP exhaust fan. Size 7E, SN 75T-539. FRP housing w/30" dia 316SS fan wheel. 10" air inlet, 6" vent down outlet. Requires 50 HP motor. |
|
|
| 39012 | BLOWER | EXHAUST FAN | | 90 HP, SS exhaust fan. Approx 36" wheel. 20" suction and discharge. Belt driven by 90 HP, 3/50/415 volt, 2950 rpm flameproof motor. |
|
|
| 39013 | BLOWER | EXHAUST FAN | 300 | Approx 300 cfm, 75 HP, 316SS exhaust fan. Mfd by Keith Blackmon, SN D09327/02. Approx 36" dia wheel. 20" suction and discharge. Belt driven by 75 HP, 3/60/415 volt, 2950 rpm flameproof motor. |
|
|
| 42675 | BLOWER | EXHAUST FAN | 19000 | 19,000 cfm @ 4" SP, plastic exhaust fan. Mfd by Plastic Blower Co, Mdl CMHP30, SN 7033. Rated 1800 rpm, 30" dia inlet, 24" x 28" outlet. Belt driven by 50 HP, 3/60/230/460 volt, 1170 rpm motor. |
|
|
| 46743 | BLOWER | EXHAUST FAN | 2400 | 2,400 cfm CS/aluminum exhaust fan. Mfd by Twin City Fan, Mdl ARR10, SN 88-65211-1-1, Type BCV-SW, Size 182. Static pressure rating 8" SP. DH wheel 22" dia. 20" inlet, 19" x 14" outlet. Belt driven by 5 HP, 3/60/230/460 volt, 1725 rpm motor, UL label. CS housing, aluminum fan blade. |
|
|
| 72324 | BLOWER | EXHAUST FAN | 1200 | Approx 1200 cfm CS exhaust fan. Static pressure rating 6. CS wheel 16" dia. 16" inlet, 18" x 24" outlet. Belt driven by 5 HP, 3/60/230/460 volt, 1745 rpm motor. |
|
|
| 75176 | BLOWER | EXHAUST FAN | 1200 | Approx 1,200 cfm 304SS exhaust fan. 7 static pressure rating. 304SS wheel 12" dia. 7" inlet, 6" x 5" outlet. Belt driven by 7 1/2 HP, 3/60/220/440 volt, 3500 rpm motor. |
|
|
| 75647 | BLOWER | EXHAUST FAN | 15000 | 15,000 cfm heresite lined/CS Chicago exhaust fan. Mdl 29AM, SN 166667-1. 50 1/2" dia wheel. 29" inlet, 24" x 28" outlet. Belt driven by 50 HP, 3/60/230/460 volt, 1735 rpm motor. Base mtd. |
|
|
| 77869 | BLOWER | EXHAUST FAN | 23300 | 23,300 cfm 304SS Bayley exhaust fan. Mdl 90H. 36" Wg static pressure rating. Belt driven by 250 HP, 3/60/440 volt, 1770 rpm motor. |
|
|
| 87308 | BLOWER | EXHAUST FAN | 32148 | 32,148 cfm Buffalo CS exhaust fan. Mdl BCS. Static pressure rating: 2" H2O. Driven by 15 HP motor. |
|
|
| 204171 | BLOWER | EXHAUST FAN | 0 | STAEFA aluminium radial fan, type MKV/TKV, driven by a 2-speed motor, 1.1 kw, 3-50/380-420/220-240 volt, 2740 rpm or 1.1-1.3 kw, 3/60/380-420/220-240/440-480/255-280 volt, 3340 rpm, 2-120mm openings |
|
|
| 204172 | BLOWER | EXHAUST FAN | 33 | 0.94m3/sec aluminium STAEFA radial fan, type MKV/TKV, 2-speed motor, 11 kw, 2/50/380-420/380-480 volt, 2900 rpm or 11 kw, 3/60/660-730/660-830 volt, 3510 rpm, 2-250mm openings |
|
|
| 205369 | BLOWER | EXHAUST FAN | 0 | 1.5KW, CS, Halifax fan. Model # 15BFB1. Belt drive. 16" suction, 12" x 16" discharge. Rated for 1730 rpm. 460 volts. |
|
|
| 208506 | BLOWER | EXHAUST FAN | 13050 | 13,050 CFM CS Blower manufactured by New York Bower.Driven by a 30 hp motor running @ 1800 rpm. Part of Carrier fluid bed dryer Heating system IPPE stock # 208509. |
|
|
| 210700 | BLOWER | EXHAUST FAN | 1539 | 1539 CFM, CS , Horizontal exhaust fan. Manufactured by Barry. Driven by a 0.75 hp motor at 2026 rpm. Driver # E-3204. |
|
|
| 210707 | BLOWER | EXHAUST FAN | 730 | 730 CFM, CS, exhaust fan. Manufactured by Roots, Model # 412 JTL, Serial # SR00034322. Positive displacement. Discharge pressure 8.8 psig. Driven by a 60 hp motor at 1775 rpm, 460 volts. . Motor frame size is 346T. Driver # E-6236. Inlet and outlet is 6". |
|
|
| 210708 | BLOWER | EXHAUST FAN | 480 | 480 CFM, CS, exhaust fan. Manufactured by Roots, Model # 68 URAI Type 522. Positive displacement, rotary lobe, left hand rotation. Driven by a 20 hp motor at 1750, rpm, 230/460 volts. TEFC enclosure with a 256T frame. Driver # E-6237. Five inch inlets and outlets. |
| 31 Items Returned | Go To Page: | 1 | 2 |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|