RegisterLogin
Need Help? or
Have something for sale? USE THIS FORM:
First Name:  
Last Name:  
Email Address:  
Company Name:  
Telephone:  
Country:  
Question:  
 
     

Chillers Minimize
1 of 10
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
 
  

 

Used Boilers

Used Hot Oil or Thermal Fluid Boilers

Used Hot Oil BoilersHot Oil or Thermal Fluid Boilers often are used to heat equipment in process plant applications.  High temperatures can be reached using thermal fluid boilers vs steam.

The hot oil or thermal fluid is heated by passing the thermal fluid around electric heating elements. On lager units, the thermal fluid is passed though tubes or coils that are heated on the outside by a flame created by burning fuel.

The different fuels that are burned include Oil (typically # 2 or # 6 grade), Natural Gas, and combinations of Oil and Gas.

The typical configurations of hot oil heater/hot oil boilers are horizontal, vertical, or packaged design.

Used Steam Boilers

IPP offer many different types of Steam Boilers including Fire Tube, Economizers, Hot Water Heaters, Waste Heat, and Water Tube Boilers.

Used Steam BoilersBoilers are used to create steam or hot water for process plant applications. Certain plants use steam or hot water (vs. a thermal fluid) to heat their reactors and heat exchangers for cooking their products. Boilers are also crucial in Power Generation plants or Co-Generation Plants where you use steam turbines to generate electricity.

The steam or hot water is heated by passing water either through tubes (Water Tube) or around tubes that are heated by a flame (Fire Tube and Scotch Marine). The flame is created by burning some type of fuel. The different fuels that are burned include Coal, Pulverized Coal, Oil (typically # 2 or # 6 grade), Natural Gas, Waste Heat, or combinations of Oil and Gas.

There are also steam boilers that heat the water by using the waste heat generated from another process in the plant to heat the water to create steam. In the trash industry there are "Trash to Steam" boilers that burn trash to generate the steam.

The typical configurations of steam boilers are water tube and fire tube. This indicates whether the heat source surrounds the tubes and the water is in the tubes (water tube), or the heat source goes through the tubes and the water surrounds the tubes (fire tube). Many smaller boilers are the fire tube type, while many very large boilers are the water tube type.

IPP has a large inventory of Used, Unused, and Reconditioned oil heaters and boilers as well as boiler accessories. Manufacturers include:  A O Smith, Adamson Global Technology, Babcock & Omnical, Babcock & Wilcox, Burnham, CEMLINE, Challenger, CLEAVER BROOKS, E. Keeler, Electro, ELECTRO STEAM, First Thermal, Foster Wheeler, Fulton, GEKA, H K D, HEATEFLEX, Holman, Hurst, Kam, KAM THERMAL, Keeler, Kewanee, Loveco, MIURA, Nebraska, Newpoint, Parker, Patterson Kelley, Pfaudler, RAYPACK, Sellers, SELLERS BOILER, Stokes, Superior, Sussan, Syltherm, Thies/Funke, Triple S, Triple S Dynamics, Vapor, Vapor Power International, Viessman, VIESSMAN ATOLA, VIESSMAN HORICELL .

Equipment Search

Enter a product number or part of its description below and click SEARCH
  Search View Quote Contents

Finally, you may filter the results based on capacity below

    Narrow Results by Capacity

Add Checked to Quote
 Add to Quote Before Changing Page

33 Items ReturnedGo To Page: 12
  Stock NumberProductSub GroupCapacityDescription
Details
22049BOILERHOT OIL66.55MM Hy-Way hot oil heater. Mdl 67CFH, SN 2656. Hev-E-Oil burner, mfd by Industrial Engineers, Mdl AM5CM, SN G8872. Fires #6 fuel.
Details
43274BOILERHOT OIL1010.0MM BTU input portable Parker thermal liquid heater system. Serial # 40225 and 40226. Unit has (2) trailer mtd Mdl HT-5000 boilers. Each rated ASME 125 psi, 5.0MM BTU output. Propane fired. Furnished fully assembled in special insulated cabinet w/burner and operating controls mtd and electrically wired in compliance w/normally accepted FM standards. Both unit mtd in tandum on 40' trailer for portable use.
Details
43354BOILERHOT OIL21.75MM BTU/hr Struthers Wells direct fired Dowtherm heater w/economizer. SN 58F-6261, NB #47. Int rated 200 psi @ 750 deg F. 5'6" OD x 13' str side. Refractory lined, 4'6" ID. 228 sq ft surface area, 18 pass, with 4 1/2" dia vert tubes. Has John Zinc type DBA-14 gas or oil fired burner mtd thru btm. Mtd on (4) legs. 12" dia x 15' long stack. W/Dean Bros 304SS circulating pump, 300 gpm @ 105'TDH (no motor). Economizer is mfd by Chanute, 403 sq ft. Rated 200 psig @ 750 deg F. (18) 4 1/2" dia x 4'10" long CS tubes, NB rated.
Details
76234BOILERHOT OIL1484,500 BTU/hr, 26 KW, Youngtown Miller hot oil system. SN HT1068, Type HT26-1S. Rated 35 gpm, rated temp 500 deg F to 700 deg F. Unit has (3) electric heating elements, Class 1, Group D. W/expansion tank mtd over cabinet. Cabinet size 32" wide x 36" deep x 70" high. Complete unit w/circulating pumps.
Details
78338BOILERHOT OIL Sterlco 9 KW/zone water dual zone temp control unit. Mdl M8422-GX, SN 44663, blt 1983. Rated at up to 300 deg F. Has 3 HP TEFC motor/pump. Electricals: 3/60/460 volt.
Details
78514BOILERHOT OIL0Approx 100,000 BTU/hr (30 KW) CS hot oil heater. Mfd by Patterson Ind, SN 65-1507, NB #1262. 18" dia x 30" str side horiz CS tank, dish head, w/(2) 15 KW electric heating elements mtd in 6" flange nozzle in each head. With 3/4" high pressure level indicator. Tank rated for 100 psi @ 700 deg F. Shell 5/16" thick, heads 1/4". Openings: top 1-1 1/2", 1-1", 3-3/4"; 1" btm outlet.
Details
83317BOILERHOT OIL99.0MM BTU/hr, Loveco CS direct fired gas oil heater. SN C-79-131, NB #2, Mdl NDEO686-18EK, blt 1980. Max allowable working pressure 150 psi @ 700 deg F. Heating surface 3180 sq ft. Heating coil openings: 2-4" inlets, 2-4" outlets. W/Bloom gas burner, SN PE-0679-15, Type 1026-100. Includes gas train panel and controls. Oil circulating pump not included. Skid mtd.
Details
83879BOILERHOT OIL11,024,000 BTU Gessner exp-proof hot oil heater. Mfd by Youngstown-Miller, SN HT-1381, Mdl HT-3001X. 300 KW, 3/60/480 volt, 392 amps. Unit has (3) 100 KW heating columns. Total oil capacity 100 gal. 1,024,000 BTU Gessner exp-proof hot oil heater. Mfd by Youngstown-Miller, SN HT-1381, Mdl HT-3001X. 300 KW, 3/60/480 volt, 392 amps. Unit has (3) 100 KW heating columns. Total oil capacity 100 gal.
Details
106465BOILERHOT OIL 30 KW Chromolox hot oil heater. Catalogue #PFV65030, SN A25182, P/N #141120853007. 3/60/240 volt. Has (2) 15 KW heaters. Complete w/120 volt gauges and controls and circulation pump.
Details
110627BOILERHOT OIL0Fulton hot oil heater, 110 kw, 375,000 BTU/hr, Serial# 37582, NB# 37585. Model# FT0375N. 480 volt, with Worthington 15 hp 3" x 2" CS circulation pump.
Details
111813BOILERHOT OIL44.0MM BTU/HR, CS, THERMINOL 66 HEATING SYSTEM, Manufacturered by Smith-Moon Steel; SN# 72-03-31289; NB# 593; 'S' stamped; stamped for 700 deg F. 710 sq. ft. heating surface, including radiant coil = 310 sq.ft. and conventional coil = 400 sq.ft. Rated for 150 psi. Carbon steel tubes. Burner by North American Manufacturing Co. Model # 214 8B. Diameter of Furnace 6', elevation to bottom of furnace from grade 78". Height of furnace with out economizer 15' Economizer dimensions;5' high x 5' long x 3.5" wide. Caged ladder to platform with railings (2.6' x 4') for economizer inspection. 16" diameter x 17' high stack with drip cap.
Details
203173BOILERHOT OIL1850,000 BTU/Hr First Thermal Fluid Heater, Model: 50-1.5-1-HHC-PG-G-UL-N4-T/C Heater, Manufacturer: First Thermal Systems, Louisville, KY, Order Number: 71620, ASME Number: 95121, Plant Number: E-12-000. Horizontal design. 89 square foot heating surface area, Certified by Heatec, Inc. Serial # 95121, NB # 272, rated for 300 psi at 800 degrees F. With newer V Power Flame Burner, Model # JR 30A-10, Serial # 038786326, Rated for Natural Gas, min: 600 MBH, 1075 Max. BTH. Operated on 115 volts. Skid mount design, horizontal heater, with controls mounted on unit.
Details
210887BOILERHOT OIL073 KW Accutherm Electric fluid heater, CS contact parts, horizontal mount design. Manufactured by Vernon Manufacturing Company, Serial number 951403-1, National Board number 643. Electric heater by Accu Therm, Service # 873, 94-5-1. 460 Volts, 3 ph, 73 kW. Designed with a 2" inlet and outlet for fluid to be heated to run through the unit. Rated for 100 psi at 450 degrees F. MDMT rated for -20 degrees at 100 psi. Unit has a CS shell 7" diameter x 105 " overall length. shell thickness is 0.365, Heads thickness is 0.280. Nozzles are 2" inlet and outlet.
Details
213039BOILERHOT OIL148 KW Mokon Hot Oil Heater, Model HC 4B24-T4, Serial Number 16194, 2 zone, each zone is 24 KW, 2 HP, 3/60/460V. Skid mounted.
Details
213244BOILERHOT OIL1225 KW, 650 Amp, hot oil heater package, with (2) Warren Electric Corp immersion heaters 460 volt, each rated 112500 Watts, 3 phase, Serial number K889K, Rated 150 PSI Model 2Z-48650-LK, with Halmar Robicon controls, Serial number 92040205, package designed by BTU Serial number M9202-219, model 10T-450200-GOL. Skid mounted with expansion tank and pumps.
Details
213411BOILERHOT OIL1Small Chromalox eletric hot oil heater for pilot plant applications.
Details
213829BOILERHOT OIL33 MM BTU/Hr, Heatec Thermal Fluid heater, Model HCI-3010-25-C-IRI Therminal Heater, Serial Number 87-117, rated 120 psi @ 630 degrees F, 422 SqFt. Unit has a horizontal internal helical coil, 2-pass design, heated by natural gas burner. Power Flame Burner Model II C3-G0-25, Serial Number 098739148, rated 4718 MBH. Burner gasses make two passes to heat the thermal fluid inside the coil; first pass though the inside of the coil bundle, then second pass is around the outside of the coil bundle when the hot gasses pass back throught he heater housing to exit though the stack. With Hot Oil Expansion tank, CS construction.
Details
214504BOILERHOT OIL5050,000,000 BTU, CS, Hot oil heater, manufactured by First Thermal Systems. Serial # 07 Model # 3000-8-4-VHC. With heater, blower and silencer. 4479 Sq.ft., heating surface, minimum flow rate, 6409 GPM. HAS tempreture is 670 degrees F. Burner manufactured by COEN, model # 655DAF26, rated for natural gas or #2 fuel oil. Vertical design for burner and heater. Overall dimensions, 19' wide x 14' long x 70' high.
Details
214505BOILERHOT OIL3535,000,000 BTU, CS, Hot oil Heater manufactured by Carotek, Inc. Model # VPH-250. Heater is vertical circular pitch design, 3,912 sq. ft heating surface area. Burner is by Carotek, Model # C-50 Vorotek high efficiency low excess burner. Fired on #2 fuel oil or natural gas. Vertical design for burner and heater. 12' od x 57'3" high.
Details
214506BOILERHOT OIL3434,000,000 BTU, CS, Hot oil heater, manufactured by First Thermal Systems. Model # 3000-8-4-VHC. With heater, blower and silencer. Burner manufactured by COEN, model # 655DAF26, rated for natural gas or #2 fuel oil. Vertical design for burner and heater. Overall dimensions, 19' wide x 14' long x 70' high.
33 Items ReturnedGo To Page: 12

Add Checked to Quote
 Add to Quote Before Changing Page
  

IPP Sales Contacts Minimize
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931
Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929
Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928
Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043
Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax
Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax
Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax
Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927

     

Home | About Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | News | Media | Contact Us
  Copyright 2002-2010 International Process Plants   Terms Of Use  Privacy Statement   
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association National Demolition Association Turnaround Management Association Association Memberships
Bookmark and Share

Follow Us On Twitter View Our Channel on YouTube