RegisterLogin
Need Help? or
Have something for sale? USE THIS FORM:
First Name:  
Last Name:  
Email Address:  
Company Name:  
Telephone:  
Country:  
Question:  
 
     

Chillers Minimize
Equipment Rotator image
Equipment Rotator image 1 of 10 Equipment Rotator imageEquipment Rotator imageEquipment Rotator image
207381
165 Ton @ -32 degrees F, Dunham Bush horizontal screw refrigeration package. Water cooled design. R22 Refrigerant. Compressor Model 2515/5.40, Horizontal Rotary Screw, rated 3550 RPM, direct coupled to a Siemens 600 HP, 3/60/460 volt motor. Evaprator is a 2 pass, 24" diamter x 176" long, (288) 3/4" x 0.049 x 176" long trufin tube carbon steel tubes. Condensor is a 2 pass, 18" diameter, x 153" long, (228) 3/4" x 0.028" x 153" long tubes, trufin copper tubes. All skid mounted with lubeoil system, and digital control panel. With Westinghouse starter WYE-Delta Closed Transition, NEMA-1 encloser floor mount. Unit dimensions are 212" L x 8"W x 116" H, 24,500 lbs.
Read More...
 
  

 

Used Chillers, Used Refrigeration Compressors & Used Cooling Towers

Used ChillersInternational Process Plants has many used chillers for sale and other used processing equipment for use in industrial refrigeration.

Much like a Boiler is used to heat a process, a Chiller and other Refrigeration equipment is typically used to cool a process.

Chillers work by compressing a refrigeration gas (R132A, Freon, R22) into a liquid, and using a special refrigeration valve, releasing the compressed liquid back into a gas.

The conversion of the liquid back into a gas removes heat and creates cold. It is the same principal as when you use a can of compressed air to clean your computer keyboard. The longer you release the compressed air, the colder the can gets.

You use the cold that is created by using a heat exchanger for liquid cooling or air exchanger if you are cooling air.

Chillers are grouped by the type of compressor:

  • Centrifugal
  • Screw Type
  • Reciprocating

Chillers are further grouped by the type of cooling used to dispense the heat generated:

  • air cooled (radiators)
  • water cooled (condensers)

Chillers are typically a packaged design with the compressor, condenser, evaporator, pumps, valves and controls all skid mounted.

Chillers are often distinguished by the Tons of Refrigeration they produce and at what temperature. A rule of thumb to use when looking for the capacity of a chiller is 1 ton of refrigeration @ 40 degrees F for each horsepower the compressor uses. The lower the discharge temperature, the more horsepower is required.

Cooling towers are designed to take water that is heated during the refrigeration process and cool it quickly by passing it through a cooling tower where large fans cool the water.

Used, Unused, and re-conditioned Chillers instock. maufacturers include: Advantage, AEC, BAC, Berg, Bry-Air, Budzar, Carrier, Cincinnati, Conair, Cooling Technologies, DUNHAM BUSCH, Dunham/Bush, Fasti, FES, Frick, FTS SYSTEMS, GES, Jensen, Kinectic Dispersion, McQuay Snyder, McSaw, Neslab, R, Sterlco, Teco, Thermalcare/Mayer, Trane, Trane Co, Transtore, York .

Equipment Search

IPPE Equipment Seach


Enter a product number or part of its description below and click SEARCH
  Search View Quote Contents


Finally, you may filter the results based on capacity below

    Narrow Results by Capacity

Add Checked to Quote
 Add to Quote Before Changing Page

20 Items ReturnedGo To Page: 1
  Stock NumberProductSub GroupCapacityDescription
Details
IPP Equipment Search Image 26266CHILLERCOMPRESSOR Refrigeration compressor turbine.
Details
IPP Equipment Search Image 48937CHILLERCOMPRESSOR Dresser 2-stage, ethylene gas refrigeration compressor system. 1st stage: Dresser Mdl 3MX5-4, SN 3X-4-921, (4-impellor) compressor rated inlet flow 21078 cu meter/hr (12,406 cfm); inlet pressure -.54 barg (-.8 psi); inlet temp -112 deg C; discharge pressure 2.64 barg; discharge temp 29.3 deg C. Critical speed 5920 rpm. 1065 KW. 2nd stage: compressor is Dresser Mdl 2M7, SN 2-7-920F, (7-impellor) rated inlet flow 6781 cu meter/hr (3,990 cu ft/min); inlet pressure 2.64 barg (40 psi); inlet temp -6.6 deg C. Discharge pressure 19.6 barg (288 psi); discharge temp 143 deg C. 8600 rpm, critical speed 6510 rpm. Rated 2168 KW. Both of these casings are fitted w/floating ring oil seals and are designed for operation in a refrigeration system on ethylene gas.
Details
IPP Equipment Search Image 74310CHILLERCOMPRESSOR 4040 ton York reciprocating refrigeration compressor. Mdl F31699DE, SN P-0114819. Open drive.
Details
IPP Equipment Search Image 88112CHILLERCOMPRESSOR Worthington reciprocating refrigeration compressor. Mdl 4ZEH, SN 1588220. R-12 refrigerant. Open drive. Driven by 1250 HP, 3/60/2300 volt, 1200 rpm synchronous motor, Type GF/44. (2) chiller tanks, control panel. Generator 4.5 KW at motor end.
Details
IPP Equipment Search Image 89298CHILLERCOMPRESSOR 200UNUSED approx 200 ton Dunham Bush rotary screw refrigeration compressor. Mdl 1610DUR4VOE, SN 090800090. No motor. 4" flanged inlet, outlet. 1 1/2" drive shaft. Rated 350 psi high side, 350 psi low side. Engine File X6742.
Details
IPP Equipment Search Image 96552CHILLERCOMPRESSOR 5Nominal 5 ton Dunham Bush reciprocating hermetic seal refrigeration compressor. Mdl 359LFN-B, SN 86K491120. Unit is 3/60/460 volt, 1175 rpm.
Details
IPP Equipment Search Image 103200CHILLERCOMPRESSOR 6,696 cfm (11377 cu meter/hr), Linde centrifugal Freon compressor. Mdl 63R5G1, SN 14-725. R-12 refrigerant. Open drive. Direct driven by 2030 HP (1560 KW), 6000 volt, 1489 rpm motor. Compressor rated for 1615 HP (1242 KW), 4800 rpm. Intake pressure suction nozzle 13.1 psi (.961 pabs). Delivery pressure @ discharge 42 psi (2.94 pabs). Delivery pressure @ battery limits 144 psi (10.1 pabs).
Details
IPP Equipment Search Image 203636CHILLERCOMPRESSOR300(2) spare York International Model YCCH163S1086YA, 4500RPM, designed pressure highside 350psig, 300psig lowside.
Details
IPP Equipment Search Image 210206CHILLERCOMPRESSOR1010 Ton CS Gass chiller, manufactured by Industrial Gas systems. Palm Coast Florida. Serial # 165-00513. Chiller ha 6" inlet and outlet. Compressor is charged with 22 lbs. of R-22 refrigarant. Compressor is driven by a 10 HP, 230/460 Volt motor, running 60 Hz at 1745 RPM.
Details
IPP Equipment Search Image 210990CHILLERCOMPRESSOR15Remanufactured,15 ton, compressor. Manufactured by Carrier, Model # 5H60. 180,000 BTU (35.9 BHP) capacity, 6 cylinder, designed to be driven by a 50 hp motor. R-22 refrigerant.
Details
IPP Equipment Search Image 212476CHILLERCOMPRESSOR150150 ton, CS, packaged reciprocating chiller, Manufactured by York. Type LCHM 115. Compressor type JS84 8 cylinder, with reduction capacity 100-75-50-25. Evaporator type 1207H, 272 tubes with 90 liters volume, Condenser WL, Type PC98, 127 tubes with capacity 77 liters. Refrigerant R-22. Chilled water temp. out 4-10 degrees C, Flow 5.2-22 l/s. Main condenser water out 30-41 degrees C, main condenser water recovered 30-52 degrees C. Power absorption by motor 112 kw Localized temperature Min. 4,4 degrees C, Max. 46 degrees C. With York Micro Panel control system mounted on skid.
Details
IPP Equipment Search Image 212478CHILLERCOMPRESSOR200324 kW CIAT chiller with single screw open type compressor, manuf. by APV –Hall LFEM 853Y-1 , SN 30106285 HH, drive 200 kW, 400 V, 349A , Refrigerant R 404 A, chilled medium water/MEG 45%, inlet temperature -21/-25° C, flow are 83,6 m³/h, evaporator pressure drop 5,8 mCE, cooling medium water 27/32 ° C, flow rate 83, 5 m³/h, condenser pressure drop 5,1 mCE, water cooled condenser pressure refrigerant side 30 bar, water side 10 bar, evaporator 10 bar.
Details
IPP Equipment Search Image 216290CHILLERCOMPRESSOR350527 CFM at 1800 rpm, CS, rotary screw compressor. Manufactured by Frick. (Typically used on the RWB II series chillers) Model/serial # TDSH233S11392 E. Designed to operate on Refrigerant NH3/R-22. Volume ratio 2.2-5.0. Maximum speed 4,500 rpm. Design pressure, 362 psi. With 8" suction line.
Details
IPP Equipment Search Image 216291CHILLERCOMPRESSOR350527 CFM at 1800 rpm, CS, rotary screw compressor. Manufactured by Frick. (Typically used on the RWB II series chillers) Model/serial # TDSH233S1536E R. Designed to operate on Refrigerant NH3/R-22. Volume ratio 2.2-5.0. Maximum speed 4,500 rpm. Design pressure, 362 psi. With 8" suction line.
Details
IPP Equipment Search Image 216292CHILLERCOMPRESSOR350527 CFM at 1800 rpm, CS, rotary screw compressor. Manufactured by Frick. (Typically used on the RWB II series chillers) Model/serial # TDSH233S11392 E. Designed to operate on Refrigerant NH3/R-22. Volume ratio 2.2-5.0. Maximum speed 4,500 rpm. Design pressure, 362 psi. With 8" suction line.
Details
IPP Equipment Search Image 705719CHILLERCOMPRESSOR 4141 ton, Alarko Brand refrigerant screw compressor, 492,000 kcal/hr, with associated shell and tube condenser, water 40 deg C in, 45 deg C out.
Details
IPP Equipment Search Image 705720CHILLERCOMPRESSOR 4141 ton, Bitzer refrigerant screw compressor, 492,000 kcal/hr, 193.2 kw, with associated shell and tube condenser, water 15 deg C in, 6 deg C out.
Details
IPP Equipment Search Image 705721CHILLERCOMPRESSOR 4141 ton, Bitzer refrigerant screw compressor, 492,000 kcal/hr, 193.2 kw, with associated shell and tube condenser, water 15 deg C in, 6 deg C out.
Details
IPP Equipment Search Image 705722CHILLERCOMPRESSOR 4141 ton, Bitzer refrigerant screw compressor, 492,000 kcal/hr, 193.2 kw, with associated shell and tube condenser, water 15 deg C in, 6 deg C out.
Details
IPP Equipment Search Image 706049CHILLERCOMPRESSOR Carrier type 30HR-161-6911LE, reciprocating liquid chiller system, duty available 700,000 BTU/hr (205 kw), serial # 12R115820, contract # 40391, max operating pressure 30 bar (high), 16 bar (low), rated 180KW, 3/50/400 volt, refrigerant R22, built on control panel, mounted on c/steel skid, system includes * (4) Refrigerant compressors, * (2) 6.67 sq.m condensers type 09RQ-022-054, shell and tube design, refrigerant volume 62 ltr, water volume 28 ltr, outside shell diameter 273mm, * (1) 34.97 sq.m cooler condenser type 10HA-160, shell and tube design, refrigerant volume 116.8 ltr, water volume 199 ltr, (258) 2780mm long tubes, shell outside diameter 406.4mm, 4-refrigerant passes, (9) baffles, minimum water flow 9.9 ltr/sec,

Add Checked to Quote
 Add to Quote Before Changing Page
  

IPP Sales Contacts Minimize
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931
Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929
Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928
Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043
Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax
Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax
Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax
Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927

     

Home | About Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | News | Media | Contact Us
  Copyright 2002-2012 International Process Plants   Terms Of Use  Privacy Statement   
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association National Demolition Association Turnaround Management Association Association Memberships
Bookmark and Share

Follow Us On Twitter View Our Channel on YouTube