 |
|
Need Help? or Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Chillers, Used Refrigeration Compressors & Used Cooling Towers
International Process Plants has many used chillers for sale and other used processing equipment for use in industrial refrigeration.
Much like a Boiler is used to heat a process, a Chiller and other Refrigeration equipment is typically used to cool a process.
Chillers work by compressing a refrigeration gas (R132A, Freon, R22) into a liquid, and using a special refrigeration valve, releasing the compressed liquid back into a gas.
The conversion of the liquid back into a gas removes heat and creates cold. It is the same principal as when you use a can of compressed air to clean your computer keyboard. The longer you release the compressed air, the colder the can gets.
You use the cold that is created by using a heat exchanger for liquid cooling or air exchanger if you are cooling air.
Chillers are grouped by the type of compressor:
- Centrifugal
- Screw Type
- Reciprocating
Chillers are further grouped by the type of cooling used to dispense the heat generated:
- air cooled (radiators)
- water cooled (condensers)
Chillers are typically a packaged design with the compressor, condenser, evaporator, pumps, valves and controls all skid mounted.
Chillers are often distinguished by the Tons of Refrigeration they produce and at what temperature. A rule of thumb to use when looking for the capacity of a chiller is 1 ton of refrigeration @ 40 degrees F for each horsepower the compressor uses. The lower the discharge temperature, the more horsepower is required.
Cooling towers are designed to take water that is heated during the refrigeration process and cool it quickly by passing it through a cooling tower where large fans cool the water.
Used, Unused, and re-conditioned Chillers instock. maufacturers include: Advantage, AEC, BAC, Berg, Bry-Air, Budzar, Carrier, Cincinnati, Conair, Cooling Technologies, DUNHAM BUSCH, Dunham/Bush, Fasti, FES, Frick, FTS SYSTEMS, GES, Jensen, Kinectic Dispersion, McQuay Snyder, McSaw, Neslab, R, Sterlco, Teco, Thermalcare/Mayer, Trane, Trane Co, Transtore, York .
|
|
IPPE Equipment Seach Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 5 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 205197 | CHILLER | ICE MACHINE | 30 | 30 ton per day, 304 SS, Frick Ice Cube system for generating ice. Model F-36 Tube ice maker designed for ammonia service. Features top mounted cutter drive, and 3 hp water pump. Chilling operation handled by by twin Frick RXB 50 screw compressors. Serial # S0034JFM THAA-3. Each RX compressor driven by a Ram high efficiency 125 hp motor, rated for 3525 rpm. Compressor rated for R-717 refrigerant, and 3600 rpm, 300 psi.
Compressors and Ice system with Micro processor controls. |
|
|
| 212430 | CHILLER | ICE MACHINE | 1 | 1 ton chiller, portable on dollie wheels, manufactured by Advantage. Model # 1K 1W 21HRX , Serial number 45892. Rated for 48-70 degrees F for the following media Glycol/water, Requires 20 GPM waterflow rate. recirculated by a 3/4 HP pump. (internal) Requires R-22 at 2.0 lbs charge. Electrical requirements are 230volts, single phase, 60 Hz, 23 amps. With explosion proof controls. Maximum operating pressure is 100 psi. Process line connections are 1.5" flanged, Condensor connections are 1" inlet & Outlet, NPT. |
|
|
| 218604 | CHILLER | ICE MACHINE | 21 | 21 ton per day, Turbo Ice Machine, complete flake ice plant. Model TAG21SAC, With a 50 ton Carrier reciprocating open compressor, model 5H80-A219, Serial number 39829NJ5, R22 refrigerant, 60 HP motor; Insulated evaporator box, 40" wide x 36" high x 97" long; Air Cooled condenser, galvanized construction with copper tubes and aluminum fins, 90" wide x 181" long x 42" OAH with cooling fans; Insulated Ice box, with vertical SS plates that form sheets of ice, 74" long x 95"wide x 118" high, with a screw conveyor under freeze plates that breaks the sheets of ice into flakes as they are conveyed out to transfer bin; pneumatic conveyor that transfers flake ice to Storage Bin. Bin is self contained Manufactured by SEMCO, rated 375 CuFt, 20 tons, Serial number 118739. |
|
|
| 706011 | CHILLER | ICE MACHINE | | 2 ton/hr flaked ice making system, consisting of: (2) model 60, 1 ton/hr (each) flaked ice making machines, manufactured by Northstar, each with a refrigerant capacity of 0.25 cu.m, refrigerant R-717, chamber 74" diameter x 72" high, scraper type agitator belt driven by 1 hp, 900 rpm motor vi, a 20:1 ratio gearbox, M.A.W.P 150 psi @ 300 deg F, M.D.M.T -50 deg F @ -7.5 psi
(1) 78.8 tons capacity single rotary screw Ammonia chiller compressor, manufactured by FES International, model 225-HE, serial # 2030179J, refrigerant R-717, power 185 kw, saturated suction pressure 3.6 psig @ -20 deg F, saturated discharge pressure 181.1 psig @ 95 deg F, driven by 185 kw, 3/50/415 volt, 2950 rpm drip proof motor, 2-oil filters, economiser,
(1) oil separator, serial # 87516, N.B # 3439, working pressure 250 psig @ 200 deg F(max), 24" diameter x 108 long,
(1) c/steel horizontal liquid receiver, 480mm diameter x 1960mm straight side, dished heads, mounted on c/steel feet,
(1) Evapco cooling tower condenser, model LSCA-110, serial # EUR-672 (1) de-oil tank
(1) Sub-cooler heat exchanger, manufactured by Ketema Inc, type DXMB Ammonia cooler, size 807-0-8P-10, N.B # 1431, tube side M.A.W.P 300 psi @ 300 deg F, M.D.M.T -20 deg F @ 300 psi, shell side M.A.W.P 300 psi @ 300 deg F, M.D.M.T -20 deg F @ 300 psi.
(1) approx 22.7-56.6 m3/hr chiller compressor, manufactured by Bitzer, serial # 900394, model 4P.3, 3/50/1450 rpm, belt driven by 11 kw, 3/50/415 volt, 1460 rpm motor |
|
|
| 706012 | CHILLER | ICE MACHINE | | 4 ton/hr flaked ice making system, system high side design pressure -1/17.2 barg @ -10/100 deg C, low side & intermediate design pressure -1/17.2 barg @ -39/40 deg C, consisting of:
(2) model 90, 2 ton/hr (each) flaked ice making machines, manufactured by Northstar, each with a refrigerant capacity of 0.49 cu.m, refrigerant R-717, M.A.W.P 150 psi @ 300 deg F, M.D.M.T -50 deg F @ -7.56 psi, chamber 74" diameter x 96" high, scraper type agitator belt driven by 1.1 kw, 3/50/415 volt, 1410 rpm motor via 40:1 ratio gearbox,
(1) rotary screw Ammonia chiller compressor, manufactured by FES International, model 23SX, serial # 1161, size/reference WRV-255-1.1-50, design pressure -1/18 barg, design inlet temperature -60/50 deg C, design outlet temperature (max) 100 deg C, normal capacity 398 kw (refrigerant), speed 2950 rpm, full load absorbed power 210 kw (at normal load), installed motor power 225 kw, system refrigerant charge 1103 kg, discharge pressure 11.6 bara, suction pressure 1.25 bara, discharge flow rate 2160 kg/hr, driven by 225 kw, 3/50/415 volt, 2965 rpm motor,
(1) oil separator, manufactured by FES International, serial # 940605, N.B # 7670, 762mm diameter x 4280mm long, design pressure -1/17.2 barg @ -10/100 deg C, M.A.W.P 300 psi @ 400 deg F, M.D.M.T -20 deg F @ 300 psi, oil filling charge 681 ltrs, 2-1.2 kw heaters.
(1) Evapco evaporative cooling condenser, model LSCA-315, serial # EUK-2124, heat transfer capacity 755 kw, design pressure -1/17.2 barg @ -10/100 deg C, normal condensing pressure 11.6 bara, saturated temperature 29 deg C, full load flow 2160 kg/hr, 6-fans driven by one 18.5 kw motor, 2-heaters rated 3 kw,
(1) c/steel liquid receiver, manufactured by FES, serial # 950084, N.B # 7756, 914mm diameter x 4267 overall length, design pressure -1/17.2 barg @ -10/100 deg C, M.A.W.P 300 psi @ 650 deg F, M/D/M/T -7 deg F @ 300 psi,
(1) sub-cooler heat exchanger, type DXMB cooler, manufactured by Ketema Inc, 273mm diameter x 2069mm overall length, type 'D', tube side fluid is Ammonia R-717, M.A.W.P 300 psi @ 200 deg F, M.D.M.T -20 deg F @ 300 psi, design pressure -1/17.2 barg @ -39/40 deg C, shell side fluid is Ammonia R-717, design pressure -1/17.2 barg @ -1/40 deg C, normal inlet temperature 29 deg C,
(1) oil pot, manufactured by FES, serial # 950156, N.B #7711, 254mm diameter x 864mm long, design pressure -1/17.2 barg @ -39/40 deg C, M.A.W.P 300 psi @ 400 deg F, 1-2 kw heater, mounted on c/steel frame
(1) 22.7-56.8 m3/hr chiller compressor, manufactured by Bitzer, serial # 660904992, model 4P.2, 700-1750 rpm, belt driven by 11 kw, 3/50/415 volt, 1460 rpm motor
|
|
|
|
|
IPP Sales Contacts
|
 |
|
Keith West Global Sales KeithW@ippe.com +1 609 838 5931 | Amanda Vagell Global Sales AmandaV@ippe.com +1 609 838 5929 | Patti Buchman Global Sales PattiB@ippe.com +1 609 838 5928 | Ray Wagner Global Sales RayW@ippe.com +1 609 838 6043 | Regina Zarmer Europe Sales & Acquisitions ReginaZ@ippe.com +49-306-594-2445 Office +49-172-313-8439 Mobile +49-30-6594-2448 Fax | Jo Petrie, Sales Engineer UK, Scandinavia, Spain, & So.Africa jop@ippe.com +44 (0)1642 367 910 Office +44 (0)1642 367 913 Direct +44 (0)7770 748884 Mobile +44 (0)1642 367 920 Fax | Bohumil Cuta, E. Europe Sales & Acquisitions BohumilC@ippe.com +42-054-821-6680 Office +42-060-273-7517 Mobile +420-5-481-22240 Fax | Elisa Lucumi Central & So. America Sales ElisaL@ippe.com +1 609 838 5927
|
|
|
|
|
|
|
|