 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Chillers, Used Refrigeration Compressors & Used Cooling Towers
 International Process Plants has many used chillers for sale and other used processing equipment for use in industrial refrigeration.
Much like a Boiler is used to heat a process, a Chiller and other Refrigeration equipment is typically used to cool a process.
Chillers work by compressing a refrigeration gas (R132A, Freon, R22) into a liquid, and using a special refrigeration valve, releasing the compressed liquid back into a gas.
The conversion of the liquid back into a gas removes heat and creates cold. It is the same principal as when you use a can of compressed air to clean your computer keyboard. The longer you release the compressed air, the colder the can gets.
You use the cold that is created by using a heat exchanger for liquid cooling or air exchanger if you are cooling air.
Chillers are grouped by the type of compressor:
- Centrifugal
- Screw Type
- Reciprocating
Chillers are further grouped by the type of cooling used to dispense the heat generated:
- air cooled (radiators)
- water cooled (condensers)
Chillers are typically a packaged design with the compressor, condenser, evaporator, pumps, valves and controls all skid mounted.
Chillers are often distinguished by the Tons of Refrigeration they produce and at what temperature. A rule of thumb to use when looking for the capacity of a chiller is 1 ton of refrigeration @ 40 degrees F for each horsepower the compressor uses. The lower the discharge temperature, the more horsepower is required.
Cooling towers are designed to take water that is heated during the refrigeration process and cool it quickly by passing it through a cooling tower where large fans cool the water.
Used, Unused, and re-conditioned Chillers instock. maufacturers include: Advantage, AEC, BAC, Berg, Bry-Air, Budzar, Carrier, Cincinnati, Conair, Cooling Technologies, DUNHAM BUSCH, Dunham/Bush, Fasti, FES, Frick, FTS SYSTEMS, GES, Jensen, Kinectic Dispersion, McQuay Snyder, McSaw, Neslab, R, Sterlco, Teco, Thermalcare/Mayer, Trane, Trane Co, Transtore, York .
|
|
IPPE Equipment Seach
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 18 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 41377 | CHILLER | LOW TEMP | 242 | UNUSED 242 ton Carrier centrifugal low temp gas chiller. 2.889MM BTU/hr. Mdl 17D840, SN 25142. 441 acfm. Uses #12 Freon. Mtd water cooled design. -108 deg F to 80 deg F range. Unit driven by 600 HP, 3/60 motor. Skid mtd design. |
|
|
| 41378 | CHILLER | LOW TEMP | 160 | 160 ton Carrier centrifugal low temp gas chilled package. Model #17D840, Serial #25154. 292 scfm. Uses #12 Freon. Carrier compressor Model #17PF-31X, Serial #01-310. Water cooled packaged design. 400 HP, 3/60/4000 volt, 1780 rpm, driven thru Lufkin Model #N1000C, 3.057:1 ratio gear reducer. |
|
|
| 44173 | CHILLER | LOW TEMP | 350 | 350 ton Carrier Mdl 17AM44 low temp brine chiller. SN 3035. Driven thru Western gear, 4112 frame speed increased w/external oil cooling. Input speed 1775/6000 out. Gear ratio 1/3.36750:1. Complete w/cooler (#44177), receiver (#44100). Requires condenser and 1750 HP motor. |
|
|
| 107969 | CHILLER | LOW TEMP | 225 | 225 Ton @ 12 degrees F, FES, Low Temperature refrigeration package, Model 350, Serial number 75K/021C, water cooled design, with a Dunham Busch Model 350 screw compressor, driven by a 450 HO, 3/60, 2300/4160 volt motor, 3520 rpm. Uses R-717, cools from 16 degrees F to 12 degrees F. |
|
|
| 203015 | CHILLER | LOW TEMP | 60 | 60 ton @ -20 Degrees F, Dunham Bush low temperature packaged chiller. Model IPCX230-0OF, SN# 80007601 A90D. Rated high side 350 psig; low side 230 psig. Compressor is a rotary screw type, Model 2010DLR3VOE, SN# 90B800029D, direct coupled to a 250 HP Marathon Electric motor. Model # VK445TSTDS730BN W. Rated for 3/60/460 volt, 77 amps, 3565 rpm. 445T frame, WYE start/Delta run. R22 refirgerant. Condensor is Duhnam Bush , NB # 17414, Serial # 0262590A. Model # CRR01679B2L and rated for shell 406 psi at 200 degrees F, tubes 300 psi at 200 degrees F. Oil seperator by E.H. Nickell, serial # 39952, NB # 37229, rated for 300 psi at 250 degrees F. Built in 1990.
Skid mounted design, with overall dimensions of 13' 8" long x 7' wide x 8' high. Weight 7,000 lbs. |
|
|
| 203125 | CHILLER | LOW TEMP | 200 | Nominal 200 Ton Vilter Ammonia mini screw compressor skid. Screw compressor is a model VSS-601 (VVR-A-H-NEC-L1) mini screw compressor, Tested pressure to 150 psi. Direct coupled to a US Electric AC motor. Rated for 230 HP, at 3560 rpms. ID # D08-H534A-H and Catalog # D250E1FS, Model # H634A. 3 ph, 50 or 60 Hz, 460 Volts and 226 FLA. Motor frame is 444TS. Mounted on reciever NB# 41266, SN# 383-701-1. Built 1995. Tank rated 300 PSIG @ -20 to 400 degrees F. On board mounted Vilter Microproccessor control system. OAD 4' wide x 11' long x 6' high. |
|
|
| 203635 | CHILLER | LOW TEMP | 300 | 300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available. |
|
|
| 205654 | CHILLER | LOW TEMP | 350 | 350 ton @ 38 to 28 degrees F, York Codepak packaged chiller. R11, 900 gpm, Model YTJ1K3E2-CTES. Compressor Model YDTH-120, serial number MRP497087, driven by a 500 HP, 3/60/4160V motor. Digital controls. |
|
|
| 207380 | CHILLER | LOW TEMP | 157 | 157 ton @ -32 Deg F. to 600 ton @ 40 deg. F, Nutemp Multon Temperature chiller.Model # NTWS-630, Nutemp Job # 747. Packaged water cooled design, with FES digital controls. Mycom series V screw compressor, model 250VLD, for running R-22. Condenser is Dunham Bush, NB # 54625. Driven by Siemens Allis 600 Hp electric motor.
Controls by FES. |
|
|
| 207381 | CHILLER | LOW TEMP | 165 | 165 Ton @ -32 degrees F, Dunham Bush horizontal screw refrigeration package. Water cooled design. R22 Refrigerant. Compressor Model 2515/5.40, Horizontal Rotary Screw, rated 3550 RPM, direct coupled to a Siemens 600 HP, 3/60/460 volt motor. Evaprator is a 2 pass, 24" diamter x 176" long, (288) 3/4" x 0.049 x 176" long trufin tube carbon steel tubes. Condensor is a 2 pass, 18" diameter, x 153" long, (228) 3/4" x 0.028" x 153" long tubes, trufin copper tubes. All skid mounted with lubeoil system, and digital control panel. With Westinghouse starter WYE-Delta Closed Transition, NEMA-1 encloser floor mount. Unit dimensions are 212" L x 8"W x 116" H, 24,500 lbs. |
|
|
| 207382 | CHILLER | LOW TEMP | 165 | 165 Ton @ -32 degrees F, Dunham Bush horizontal screw refrigeration package. Water cooled design. R22 Refrigerant. Compressor Model 2515/5.40, Horizontal Rotary Screw, rated 3550 RPM, direct coupled to a Siemens 600 HP, 3/60/460 volt motor. Evaprator is a 2 pas, 24" diamter x 176" long, (288) 3/4" x 0.049 x 176" long trufin tube carbon steel tubes; Condenser is a 2 pass, 18" diameter, x 153" long, (228) 3/4" x 0.028" x 153" long tubes, trufin copper tubes. All skid mounted with lubeoil system, and digital control panel. With Westinghouse starter WYE-Delta Closed Transition, NEMA-1 encloser floor mount. Unit dimensions are 212" L x 8"W x 116" H, 24,500 lbs. |
|
|
| 207432 | CHILLER | LOW TEMP | 125 | 125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F. |
|
|
| 207433 | CHILLER | LOW TEMP | 125 | 125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 96423041. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor. Glycol Flow= 500 GPM, colling water flow= 500 gpm,
Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F. |
|
|
| 212475 | CHILLER | LOW TEMP | 100 | 356 KWH @ 0 degrees C, York packaged Chiller |
|
|
| 212477 | CHILLER | LOW TEMP | 107 | 376KWH @ -25 degrees C, CIAT/HALL Packaged chiller. |
|
|
| 216000 | CHILLER | LOW TEMP | 150 | 150 ton @ 25 degrees F, Trane water cooled rotary chiller. Model # RTHC1D1SFSOD1L3E11FVOUCO. Serial # UOOB04480. 480 volt, 3 ph, 60 Hz. Requires 575 lbs. R-134A. Evaporator rated for Propylene Glycol, 607 gpm, 3 pass, inlet @ 32 degrees F, outlet @ 25 degrees F. Condenser rated for cooling water, 2 pass, 85 degrees F inlet and 95 degrees F outlet. Machine efficiency rated for 1.377 kw/ton. Rated for 200 psi high and low side. Trane condenser NB # 74806 Serial # 24806, rated for 200 psi at 300 degrees F. Built in 2000. Inlet and outlet nozzles are 9". 128" long x 75" wide x 80" high. Electronic controls and rated for explosion proof atmosphere. |
|
|
| 216001 | CHILLER | LOW TEMP | 255 | 255 ton @ 25 degrees F, Trane CentraVac Low temperture, Series R chiller, Model Number RTHB255 FLEOSLWPOOOUNC4LF2LFOOQUO. Serial # U96HO6429. 197 kw electric drive motor rated for 460 volt,3 ph, 60 Hz. Requires 705 lbs. R-22. Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) High and low sides rated for 300 psi. Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2 pass design) Low tempreture unit capable of obtaining a range of 39-20 degrees F. 137" l x 52" w x 84" h. 6 inch connections process & water side. Electronic controls, rated for explosion proof atmosphere. |
|
|
| 216002 | CHILLER | LOW TEMP | 255 | 255 ton @ 25 degrees F, Trane CentraVac Low temperture, Series R chiller, Model # RTHB255FLEOSLWPOOOUNC4LF2LFOOQUO. 197 kW drive motor rated for 460 volt,3 ph, 60 Hz. Requires 705 lbs. R-22. Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) High and low sides rated for 300 psi. Condenser NB # 44012, serial # 44012, built in 1996, rated for 300 psi at 300 degrees F.( 2 pass design) Low tempreture unit can obtain range of 39-20 degrees F. 137" l x 52" w x 84" h. 6 inch connections process & water side. Electronic controls, rated for explosion proof atmosphere. |
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|