 |
|
Need Help? or Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Chillers, Used Refrigeration Compressors & Used Cooling Towers
International Process Plants has many used chillers for sale and other used processing equipment for use in industrial refrigeration.
Much like a Boiler is used to heat a process, a Chiller and other Refrigeration equipment is typically used to cool a process.
Chillers work by compressing a refrigeration gas (R132A, Freon, R22) into a liquid, and using a special refrigeration valve, releasing the compressed liquid back into a gas.
The conversion of the liquid back into a gas removes heat and creates cold. It is the same principal as when you use a can of compressed air to clean your computer keyboard. The longer you release the compressed air, the colder the can gets.
You use the cold that is created by using a heat exchanger for liquid cooling or air exchanger if you are cooling air.
Chillers are grouped by the type of compressor:
- Centrifugal
- Screw Type
- Reciprocating
Chillers are further grouped by the type of cooling used to dispense the heat generated:
- air cooled (radiators)
- water cooled (condensers)
Chillers are typically a packaged design with the compressor, condenser, evaporator, pumps, valves and controls all skid mounted.
Chillers are often distinguished by the Tons of Refrigeration they produce and at what temperature. A rule of thumb to use when looking for the capacity of a chiller is 1 ton of refrigeration @ 40 degrees F for each horsepower the compressor uses. The lower the discharge temperature, the more horsepower is required.
Cooling towers are designed to take water that is heated during the refrigeration process and cool it quickly by passing it through a cooling tower where large fans cool the water.
Used, Unused, and re-conditioned Chillers instock. maufacturers include: Advantage, AEC, BAC, Berg, Bry-Air, Budzar, Carrier, Cincinnati, Conair, Cooling Technologies, DUNHAM BUSCH, Dunham/Bush, Fasti, FES, Frick, FTS SYSTEMS, GES, Jensen, Kinectic Dispersion, McQuay Snyder, McSaw, Neslab, R, Sterlco, Teco, Thermalcare/Mayer, Trane, Trane Co, Transtore, York .
|
|
|
| Stock Number | 203635 |
| PG | CHILLER |
| SG | LOW TEMP |
| SSG | |
| Capacity | 300 |
| Product Description | 300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available. |
|
|
|
|
|
IPP Sales Contacts
|
 |
|
Keith West Global Sales KeithW@ippe.com +1 609 838 5931 | Amanda Vagell Global Sales AmandaV@ippe.com +1 609 838 5929 | Patti Buchman Global Sales PattiB@ippe.com +1 609 838 5928 | Ray Wagner Global Sales RayW@ippe.com +1 609 838 6043 | Regina Zarmer Europe Sales & Acquisitions ReginaZ@ippe.com +49-306-594-2445 Office +49-172-313-8439 Mobile +49-30-6594-2448 Fax | Jo Petrie, Sales Engineer UK, Scandinavia, Spain, & So.Africa jop@ippe.com +44 (0)1642 367 910 Office +44 (0)1642 367 913 Direct +44 (0)7770 748884 Mobile +44 (0)1642 367 920 Fax | Bohumil Cuta, E. Europe Sales & Acquisitions BohumilC@ippe.com +42-054-821-6680 Office +42-060-273-7517 Mobile +420-5-481-22240 Fax | Elisa Lucumi Central & So. America Sales ElisaL@ippe.com +1 609 838 5927
|
|
|
|
|
|
|
|