 |
|
Need Help? or Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Chillers, Used Refrigeration Compressors & Used Cooling Towers
International Process Plants has many used chillers for sale and other used processing equipment for use in industrial refrigeration.
Much like a Boiler is used to heat a process, a Chiller and other Refrigeration equipment is typically used to cool a process.
Chillers work by compressing a refrigeration gas (R132A, Freon, R22) into a liquid, and using a special refrigeration valve, releasing the compressed liquid back into a gas.
The conversion of the liquid back into a gas removes heat and creates cold. It is the same principal as when you use a can of compressed air to clean your computer keyboard. The longer you release the compressed air, the colder the can gets.
You use the cold that is created by using a heat exchanger for liquid cooling or air exchanger if you are cooling air.
Chillers are grouped by the type of compressor:
- Centrifugal
- Screw Type
- Reciprocating
Chillers are further grouped by the type of cooling used to dispense the heat generated:
- air cooled (radiators)
- water cooled (condensers)
Chillers are typically a packaged design with the compressor, condenser, evaporator, pumps, valves and controls all skid mounted.
Chillers are often distinguished by the Tons of Refrigeration they produce and at what temperature. A rule of thumb to use when looking for the capacity of a chiller is 1 ton of refrigeration @ 40 degrees F for each horsepower the compressor uses. The lower the discharge temperature, the more horsepower is required.
Cooling towers are designed to take water that is heated during the refrigeration process and cool it quickly by passing it through a cooling tower where large fans cool the water.
Used, Unused, and re-conditioned Chillers instock. maufacturers include: Advantage, AEC, BAC, Berg, Bry-Air, Budzar, Carrier, Cincinnati, Conair, Cooling Technologies, DUNHAM BUSCH, Dunham/Bush, Fasti, FES, Frick, FTS SYSTEMS, GES, Jensen, Kinectic Dispersion, McQuay Snyder, McSaw, Neslab, R, Sterlco, Teco, Thermalcare/Mayer, Trane, Trane Co, Transtore, York .
|
|
IPPE Equipment Seach Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 16 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 96271 | CHILLER | TOWER | 315 | 315 ton Baltimore air coil. Mdl VLT-325ASS, SN 70-6851. Unit has (3) fans driven by (1) 15 HP motor. Housing dimensions 9' wide x 12'3" long x 11' high. |
|
|
| 96272 | CHILLER | TOWER | 315 | 315 ton Baltimore air coil. Mdl VLT-315ASS, SN 706850. Unit has (3) fans driven by (1) 15 HP motor. Housing dimensions 9' wide x 12'3" long x 11' high. |
|
|
| 206251 | CHILLER | TOWER | 860 | 860 ton Marley Refrigeration Cooling Tower, 2600 GPM. One cell, One fan. |
|
|
| 208813 | CHILLER | TOWER | 900 | Approximately 900 gpm, Tower Tech Inc., modular forced draft counter flow cooling tower. Model TTMT-144-219, serial number 1086-30-08-010. Unit is Fiberglass and PVC construction. Overall dimensions 12'W x 13'6"L x 17'H. 8" inlet; 10" outlet. With (4) updraft fans. Closed loop system. Each fan is 5 hp for total of 20 hp. Overflow is 6". Installation, Operation, And Maintenance manual is available. |
|
|
| 212638 | CHILLER | TOWER | 35 | 35 ton, CS,(Hot dip gavanized) closed circuit cooling tower. Manufactured by Baltimore Air Coil. Model VF1. Forced draft airflow system with Counter flow design. Four centrifugal fans, mounted on a single shaft belt driven by a 7.5 hp AC electric motor. Rated for 19,740 cfm. Process side serpentine coil with a capacity of 95 gallons. 4” coil connections. Spray pump rated for 150 gpm, at 12 ft./tdh, driven by a GE AC electric motor, sump circulation through 3” lines. Sump drain 2”. Overall dimensions are 12’ long x 48” deep x 99” high. Shipping weight 4,760 lbs. |
|
|
| 213072 | CHILLER | TOWER | 0 | Marley Galvaized Steel Cooling Tower, Type NC6001GS, Serial number 054844-001-94. 20' long, 12' wide. |
|
|
| 213410 | CHILLER | TOWER | 0 | Marley Galvaized Steel Cooling Tower, Type NC6011GC, Serial number 028139-001-92. (2) cell tower, 140" wide x 236" long x 132" high. |
|
|
| 214769 | CHILLER | TOWER | 1000 | 1000 ton, Cooling tower, manufactured by Marley, five cell design, Series 880 double flow. Model # 5-8817, Serial # 5-8817-1-788-83. Five separate cells with type H3 Aluminum blade fans, 12 blades mounted on an aluminum hub. 120” diameter x 45.5 degree pitch, rated for 384 rpm. Vibration safety limit switch on each. Each fan driven through a series 20-20T gear reducer, via twin flex drive shaft. Ac electric motor, manufactured by Siemens –Allis, two speeds 40 /10 hp, 1800/900 rpm. 3 phase, 60 hz, 460 volts. Electric basin heaters designed to prevent freeze ups. Eight inch inlet lines: 10 sump outlet, rated for 2400 gpm. Overall dimensions 63’ 6.5” long x 21’ 10” wide x 14’ 5.25” high. Complete with ladders and handrails. |
|
|
| 216317 | CHILLER | TOWER | 0 | Recold evaporative fluid cooler, manufactured by SPX (Marley), model JWH70C, serial JW-10026871-A1. |
|
|
| 216330 | CHILLER | TOWER | 299 | 299 Nominal Tons, cooling tower manufactured by Baltimore Aircoil Company. Model # FXV-Q661, serial # 99606751. Capcity: 897 GPM (waster from 102 deg. F to 90 deg. F entering air web bulb and 1.15 PSIG fluid pressure drop). Constructed of galvanized steel. This unit is a single air inlet model, with a closed internal coil for process liquid. Internal coil volume 439 gallons, Fan HP, 45, pump hp 7.5. Connection sizes: Make Up water; 1.5”, coil 8”. Spray pump rated for 900 gpm. Dimensions as follows: 18’ 2”” long x 12’ wide x 16’ 5” high, 9’ 3” to top of access section, Spray pump sticks out 2’ 1”. (See drawing attached) Belt B100. 18’ x 11’10” x 16’4 1/4” assembled dimensions |
|
|
| 216331 | CHILLER | TOWER | 299 | 299 Nominal Tons, cooling tower manufactured by Baltimore Aircoil Company. Model # FXV-Q661, serial # 99606781. Capcity: 897 GPM (waster from 102 deg. F to 90 deg. F entering air web bulb and 1.15 PSIG fluid pressure drop). Constructed of galvanized steel. This unit is a single air inlet model, with a closed internal coil for process liquid. Internal coil volume 439 gallons, Fan HP, 45, pump hp 7.5. Connection sizes: Make Up water; 1.5”, coil 8”. Spray pump rated for 900 gpm. Dimensions as follows: 18’ 2”” long x 12’ wide x 16’ 5” high, 9’ 3” to top of access section, Spray pump sticks out 2’ 1”. (See drawing attached), Belt B100. 18’ x 11’10” x 16’4 1/4” assembled dimensions |
|
|
| 216332 | CHILLER | TOWER | 299 | 299 Nominal Tons, cooling tower manufactured by Baltimore Aircoil Company. Model # FXV-Q661, serial # 99605791. Capcity: 897 GPM (waster from 102 deg. F to 90 deg. F entering air web bulb and 1.15 PSIG fluid pressure drop). Constructed of galvanized steel. This unit is a single air inlet model, with a closed internal coil for process liquid. Internal coil volume 439 gallons, Fan HP, 45, pump hp 7.5. Connection sizes: Make Up water; 1.5”, coil 8”. Spray pump rated for 900 gpm. Dimensions as follows: 18’ 2”” long x 12’ wide x 16’ 5” high, 9’ 3” to top of access section, Spray pump sticks out 2’ 1”. (See drawing attached), Belt B100. 18’ x 11’10” x 16’4 1/4” assembled dimensions |
|
|
| 216333 | CHILLER | TOWER | 299 | 299 Nominal Tons, cooling tower manufactured by Baltimore Aircoil Company. Model # FXV-Q661, serial # 99606761. Capcity: 897 GPM (waster from 102 deg. F to 90 deg. F entering air web bulb and 1.15 PSIG fluid pressure drop). Constructed of galvanized steel. This unit is a single air inlet model, with a closed internal coil for process liquid. Internal coil volume 439 gallons, Fan HP, 45, pump hp 7.5. Connection sizes: Make Up water; 1.5”, coil 8”. Spray pump rated for 900 gpm. Dimensions as follows: 18’ 2”” long x 12’ wide x 16’ 5” high, 9’ 3” to top of access section, Spray pump sticks out 2’ 1”. (See drawing attached), Belt B100. 18’ x 11’10” x 16’4 1/4” assembled dimensions |
|
|
| 216334 | CHILLER | TOWER | 299 | 299 Nominal Tons, cooling tower manufactured by Baltimore Aircoil Company. Model # FXV-Q661, serial # 99606771. Capcity: 897 GPM (waster from 102 deg. F to 90 deg. F entering air web bulb and 1.15 PSIG fluid pressure drop). Constructed of galvanized steel. This unit is a single air inlet model, with a closed internal coil for process liquid. Internal coil volume 439 gallons, Fan HP, 45, pump hp 7.5. Connection sizes: Make Up water; 1.5”, coil 8”. Spray pump rated for 900 gpm. Dimensions as follows: 18’ 2”” long x 12’ wide x 16’ 5” high, 9’ 3” to top of access section, Spray pump sticks out 2’ 1”. (See drawing attached), Belt B100. 18’ x 11’10” x 16’4 1/4” assembled dimensions. |
|
|
| 216335 | CHILLER | TOWER | 299 | 299 Nominal Tons, cooling tower manufactured by Baltimore Aircoil Company. Model # FXV-Q661, serial # 99606741. Capcity: 897 GPM (waster from 102 deg. F to 90 deg. F entering air web bulb and 1.15 PSIG fluid pressure drop). Constructed of galvanized steel. This unit is a single air inlet model, with a closed internal coil for process liquid. Internal coil volume 439 gallons, Fan HP, 45, pump hp 7.5. Connection sizes: Make Up water; 1.5”, coil 8”. Spray pump rated for 900 gpm. Dimensions as follows: 18’ 2”” long x 12’ wide x 16’ 5” high, 9’ 3” to top of access section, Spray pump sticks out 2’ 1”. (See drawing attached), Belt B100. 18’ x 11’10” x 16’4 1/4” assembled dimensions. |
|
|
| 802175 | CHILLER | TOWER | 0 | 725 m3/hr (max) Marley-Davenport NC-8241 cooling tower, 299 m3/hr (min) cooling capacity, serial # 660016, 45 kw, 3/50/415 volt, gear reducer model 22.3, 3.79:1 ratio, inlet temp 28 to 40 deg C, recool temp 23 to 30 deg C, wet bulb temp 18 to 25 deg C, handrail around top, 2 x ladders, 3050mm diameter fan, manufactured by Brook Hansen, type 120-6-24L/22MT, serial # GH036299, driven by 45 kw, 3/50/380 volt, 1470 rpm motor, tower with 3 x Durco 185 m3/hr @ 23 deg C centrifugal pumps, type Chemstar, size 150x125-400/400, 50m head, 1500 rpm, S.G 1.00, driven by 45 kw, 3/50/415 volt, 1470 rpm Exn 11 T3 motor, mechanical seal. |
|
|
|
|
IPP Sales Contacts
|
 |
|
Keith West Global Sales KeithW@ippe.com +1 609 838 5931 | Amanda Vagell Global Sales AmandaV@ippe.com +1 609 838 5929 | Patti Buchman Global Sales PattiB@ippe.com +1 609 838 5928 | Ray Wagner Global Sales RayW@ippe.com +1 609 838 6043 | Regina Zarmer Europe Sales & Acquisitions ReginaZ@ippe.com +49-306-594-2445 Office +49-172-313-8439 Mobile +49-30-6594-2448 Fax | Jo Petrie, Sales Engineer UK, Scandinavia, Spain, & So.Africa jop@ippe.com +44 (0)1642 367 910 Office +44 (0)1642 367 913 Direct +44 (0)7770 748884 Mobile +44 (0)1642 367 920 Fax | Bohumil Cuta, E. Europe Sales & Acquisitions BohumilC@ippe.com +42-054-821-6680 Office +42-060-273-7517 Mobile +420-5-481-22240 Fax | Elisa Lucumi Central & So. America Sales ElisaL@ippe.com +1 609 838 5927
|
|
|
|
|
|
|
|