RegisterLogin
Need Help? or
Have something for sale? USE THIS FORM:
First Name:  
Last Name:  
Email Address:  
Company Name:  
Telephone:  
Country:  
Question:  
 
     

Chillers Minimize
1 of 10
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
 
  

 
Equipment Search

Enter a product number or part of its description below and click SEARCH
  Search View Quote Contents

OR

Now choose a product sub group (if any are present below)
Add Checked to Quote
 Add to Quote Before Changing Page

15 Items ReturnedGo To Page: 1
  Stock NumberProductSub GroupCapacityDescription
Details
45979CLASSIFIER  Lab size Donaldson 304SS Acucut air swept classifier. Mfd by Majec Div, Mdl A12, SN 12-16005. SS contact parts. Will separate up to 20 micron particle size. Self-contained design w/cyclone, (2) air filters and controls.
Details
75718CLASSIFIER  ****Acucut production classifier. Mfd by Donaldson Co, SN 18-14003, Mdl B-18. Cut size range 0.5 to 50 microns. Feed rate from 20 to 400 lbs/hr. Driven by 2 HP, 3/60/220/440 volt motor thru Reeves varispeed, max output 200 to 4200 rpm. Vac pump mfd by MD Pneumatic, Mdl 17-4006, capacity 150 cfm, 10"Hg max. Rotor speed max 440 to 4400 rpm. Belt driven by 15 HP, 3/60/220/440 volt, 1750 rpm motor, UL label. Compressed air requirements 8 cfm, 60-100 psi. Unit complete w/cyclone and fine powder recovery system.
Details
207934CLASSIFIER 48Turbodyne CS centrifugal Classifier/Seperator. Horizontal chamber, internal classifier belt driven by Approx 10HP motor.
Details
207937CLASSIFIER 3030" Sweco 304SS Turbo-Screen Classifier, rated 1000 CFM, 10 PSI @ 100 degrees F. For scalping or dedusting on screens as fine as 20 microns. Suction feed through 6" inlet. Belt driven by 7.5 HP 3/60/230/460 volt motor. Mounted on stand.
Details
207939CLASSIFIER 48Turbodyne centrifugal Classifier/Seperator. Horizontal chamber, internal classifier belt driven by Approx 10HP motor.
Details
207942CLASSIFIER 3030" Sweco 304SS Turbo-Screen Classifier, rated 1000 CFM, 10 PSI @ 100 degrees F. For scalping or dedusting on screens as fine as 20 microns. Suction feed through 6" inlet. Belt driven by 7.5 HP 3/60/230/460 volt motor. Mounted on stand.
Details
207944CLASSIFIER 3030" Sweco 304SS Turbo-Screen Classifier, rated 1000 CFM, 10 PSI @ 100 degrees F. For scalping or dedusting on screens as fine as 20 microns. Suction feed through 6" inlet. Belt driven by 7.5 HP 3/60/230/460 volt motor. Mounted on stand.
Details
210185CLASSIFIER 1212 Inch Diameter inlet Carbon Steel skid mounted High Efficiency Fine classifier manufactured by NETZSCH-CODUX. Serial # 93051187-003. Type CSF 170 HD. 3600 RPM rotor max speed. 15kW. Belt driven by a 40 hp Reliance Duty Master motor, rated for 40 hp, 3540 rpm, 460 vac, 35 amps. Inlet size is 9", outlet is 21" x 19 " square flange. Rejects line is 5".Overall dimensions are 4' wide x 7.25' long x 5' high. Particle wheel has hinged door for clean out and wheel access. This classifier is rated for 2000-2600 m3h, and 200/2400 kG/h. Finess is rated for 3.0-4.0 (c/37um).
Details
210307CLASSIFIER 18CS, Hosokawa Alpine type NAZ334 cyclone type partical classifier/separator, Serial number 099033.2, rated 0.50 bar @ 60 Degrees C, 75 CuDM air flow. With hinged and clamped housing for easy cleaning. Unit has a 6" rotory valve on discharge. Unit is mounted on (4) lugs.
Details
210311CLASSIFIER 20CS, Hosokawa Alpine type NAZ560 cyclone type partical classifier/separator, Serial number 099033, rated 0.50 bar @ 60 Degrees C, 75 CuDM air flow. With hinged and clamped housing With Hydraulic assist for easy cleaning. Housing is 20" diameter x 18" straight side, with 72" cone. Unit has a 6" rotory valve on discharge. Unit is mounted on (4) lugs.
Details
210315CLASSIFIER 2CS, Hosokawa Alpine type NAZ335 cyclone type particle classifier/separator, Serial number 099033.2, rated 0.50 bar @ 60 Degrees C, 75 CuDM air flow. With hinged and clamped housing for easy cleaning. Housing is 20" diameter x 18" straight side, with 72" cone. Unit has a 6" rotory valve on discharge. Unit is mounted on (4) lugs.
Details
210328CLASSIFIER 25Alpine CS Classifier
Details
210333CLASSIFIER 24CS Cyclone Seperator, 24" diameter x 20" straight side with 10' cone bottom. 10" top tankgential opening, 10" side tangential opening, 6" bottom opening with valve. Mounted in CS stand. Unit housing clamps together for cleaning.
Details
210334CLASSIFIER 18CS Cyclone Seperator, 18" diameter x 15" straight side with 6' cone bottom. 8" top tangential opening, 8" side tangential opening, 6" bottom opening with valve. Mounted in CS stand. Unit housing clamps together for cleaning.
Details
210347CLASSIFIER 1Alpine 50 ATP R&D size classifier system, mounted in a portable stand with controls. Includes 304SS classifier, and cyclone dust collector. Inclueds the interconnecting ductwork, drives, and controls.

Add Checked to Quote
 Add to Quote Before Changing Page
  

IPP Sales Contacts Minimize
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931
Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929
Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928
Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043
Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax
Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax
Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax
Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927

     

Home | About Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | News | Media | Contact Us
  Copyright 2002-2010 International Process Plants   Terms Of Use  Privacy Statement   
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association Society of Chemical Manufacturers and Affiliates Turnaround Management Association Association Memberships
Bookmark and Share

Follow Us On Twitter View Our Channel on YouTube