RegisterLogin
Need Help? or
Have something for sale? USE THIS FORM:
First Name:  
Last Name:  
Email Address:  
Company Name:  
Telephone:  
Country:  
Question:  
 
     

Chillers Minimize
1 of 10
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
 
  

 

Used Compressors

Used CompressorsCompressors are designed to compress (over 20 psi) and move air and other gases such as hydrogen, oxygen, nitrogen, etc. IPP's Compressors for sale are listed by the Cubic Feet per Minute or CFM rating and pressure.

The main types of compressors include:

  • centrifugal compressors
  • rotary compressors
  • reciprocating compressors

Used Centrifugal Air / Gas Compressors for Sale

Centrifugal compressors use centrifugal forces to pump air or gas to develop pressure. They typically operate at speeds of 3500 rpm or higher. Multiple stages are used to produce the required pressure rise. This type of compressor is driven by an electric motor, steam turbine, or gas turbine, with or without speed increasing gears.

Rotary compressors, blowers, and vacuum pumps are positive displacement type machines. This type of machine incorporates rotating internal lobes, screws or vanes that compress the gas or air. They are constant volume machines with variable discharge pressure. The volume can be varied only by changing the speed or bypassing or wasting some of the capacity of the machine. The types of rotary compressors are classified by the type of rotor they use. These include: straight-lobe, sliding vane, liquid piston, screw type.

Reciprocating compressors are furnished in either single-stage or multi-stage types. The principle parts of this type of machine are the cylinders and the pistons. The different types you will see include single acting air cooled or water cooled, single stage double acting water cooled, horizontal or vertical.

Equipment Search

Enter a product number or part of its description below and click SEARCH
  Search View Quote Contents

Finally, you may filter the results based on capacity below

    Narrow Results by Capacity

Add Checked to Quote
 Add to Quote Before Changing Page

97 Items ReturnedGo To Page: 12345
  Stock NumberProductSub GroupCapacityDescription
Details
1796COMPRESSORCENTRIFUGAL 23002,300 cfm @ 130 psig, Worthington 3-stage centrifugal air compressor. Mdl CAP-21. Package unit design, w/intercoolers, oil cooler and lube oil system mtd on (1) base. Takes 500 HP, 3600 rpm motor. SN T87680.
Details
17133COMPRESSORCENTRIFUGAL 945945 acfm, Sunstrand centrifugal gas compressor. Mdl LMC-313, SN 75115920. Ratio 2.47, PD 36.5 psia.Titanium construction. 1433 scfm, 1 stage. Max working pressure 1440 lbs @ 80 deg F. 6"x4" 600# flanges. W/200 HP Sundyne gearbox, 3550 rpm input, 28427 rpm output. No motor w/unit. Radial split case.
Details
17134COMPRESSORCENTRIFUGAL 730****UNUSED 730 acfm Sunstrand titanium centrifugal oxidizer recycle compressor. Mdl LMC-333, SN 78229326. Ratio 1.17, PD 476 psia, MW 41, 14330 scfm; 1 stage; max WP 1440 lbs @ 80 deg F. 6"x4" 600# flanges. W/400 HP Sundyne gearbox, 3550 rpm input, 14738 rpm output. No motor w/unit.
Details
17224COMPRESSORCENTRIFUGAL 945945 acfm Sundstrand titanium centrifugal gas (MW43.9) compressor. 1 stage. Mdl LMC-313. Inlet P 14.8 psia @ 113 F, PD 36.5 @ 305 F, 28427 rpm. Max WP 1440 lbs. Vert flange mount, side suction and discharge. 6"x4". Radial splitcase, 8.25" radial open impellor. Driven by 150 HP TEFC Allis Chalmers motor, 3/60/460 volt, 3570 rpm thru Sundyne 200 HP gearbox.
Details
17266COMPRESSORCENTRIFUGAL 730****730 cfm, Sundstrand titanium oxidizer recycle centrifugal compressor. Mdl BMC-333, SN 75115917. Ratio 1.17, PD 476 psia, MW 41. Driven by Sundyne gearbox rated 3511/14738 rpm, requires 400 HP driver. CCW rotation. 14,330 scfm. Single stage. MWP 1440 psi @ 80 deg F. Flange mtd tilted sideways on horiz stand. 7.44" impellor. 6" x 4" 600# flanges.
Details
27786COMPRESSORCENTRIFUGAL781781 acfm Sundyne Model LMC-333 centrifugal reduction gas (MW15.05) compressor. Inlet P 160 psia @ 120 F, PD 200, 21500 rpm. Driven by Ideal Electric 250 HP motor, 3/60/2300 volt, 3550 rpm thru speed increaser.
Details
29252COMPRESSORCENTRIFUGAL 12901,290 acfm Worthington centrifugal air package. SN T92114, Type CAP14. DP 115 psia, 3555 rpm. Casing design pressure 150 psig. Cooling water temp 85 degree F. Driven by Westinghouse Life Line D, Type LAC, 400 HP induction motor. Mdl HSDP, SN 2S-74. Frame 50.09-H. 3/60/4160 volts. FL amps 50, locked KVA Code D, Ins Class F, ambient 40 deg C, Time continuous 105 deg F, rise at 1.0 service factor. Style 74F12312.
Details
29253COMPRESSORCENTRIFUGAL 12901,290 acfm Worthington centrifugal air package. SN 92113, Type CAP14. DP 115 psia, 3555 rpm. Casing design pressure 150 psig. Cooling water temp 85 degree F. Driven by Westinghouse Life Line D, Type LAC, 400 HP induction motor. Mdl HSDP, SN 1S-74. Frame 50.09-H. 3/60/4160 volts. FL amps 50, locked KVA Code D, Ins Class F, ambient 40 deg C, Time continuous 105 deg F, rise at 1.0 service factor. Style 74F12312.
Details
36028COMPRESSORCENTRIFUGAL 2910****2,910 scfm @ 125 psi, Ingersoll Rand Centac compressor. SN M73-0249, Type 2030M4 (equiv to C30-M4). 3570 rpm. Direct coupled to 800 HP, 3/60/2300/4000 volt, 3575 rpm motor. Skid mtd w/control panel.
Details
38197COMPRESSORCENTRIFUGAL 1062010,620 acfm Clark centrifugal air compressor. Mdl 3H4. 3100 HP, 10324 rpm, 135 PD, 9.38 ratio. Driven by Worthington 1500 HP steam turbine (#38086) and Worthington Turbodyne 1600 HP expander (#38006).
Details
41253COMPRESSORCENTRIFUGAL 12856****UNUSED 12,856 acfm Elliott centrifugal propane (MW44) compressor. Mdl 46M8-6, SN A508127. Max working pressure 333 psi, design pressure 600 psi, hydro 900 psi, max temp 400 deg F. 30" inlet, 300 psi; 12" up discharge, 300 psi. 1st critical 2650 rpm, 2nd critical 7450 rpm. Requires a Ratio 21.22, PD 329. 12851 HP, 5640 rpm. Phila Mdl 18HSS, horiz increaser. Ratio 3.2, max torque 46979 lb/ft, 1.55 SF, 98.3%. 12581 HP, input rpm 1788. Lube oil skid avail at addl cost. No driver.
Details
41254COMPRESSORCENTRIFUGAL 26544****UNUSED 26,544 acfm Elliott centrifugal propane (MW44) compressor. Mdl 46M8-6, SN 508121. Max working pressure 331 psi, design pressure 600 psi, hydro 900 psi, max temp 400 deg F. 30" inlet, 300 psi; 12" discharge, 300 psi. 1st critical 2550 rpm, 2nd critical 7250 rpm. Inlet P 15.5 psia. Ratio 21.22, PD 329. 13717 HP, 5640 rpm. Lube system avail @ addl cost. No driver.
Details
41255COMPRESSORCENTRIFUGAL 6330UNUSED 6,330 acfm Elliott centrifugal compressor. Mdl 29M3, SN A648016. Inlet P 350 psia, PD 575. 17.7 MW. Max working pressure 650 psi, design pressure 750 psi, hydro 975/1175 psi max temp 425 deg F. 16" inlet, 600 psi; 10" discharge up, 600 psi. 6950 HP, 11189 rpm. Through Phila Mdl 17HS, horiz increaser. Ratio 6.26, 1.5 SF. 8000 HP, input rpm 1788, output rpm 11189. No driver. Lube oil system available at extra cost.
Details
41256COMPRESSORCENTRIFUGAL 9539UNUSED 9,539 acfm Elliott centrifugal compressor. Mdl 38M4, SN A508215T. Design pressure 400 psi, hydro 600 psi, max OT 350/-20 deg F. 56MW. 20" inlet, 300 psi; 16" discharge, 300 psi. 1st critical 4779 rpm, 2nd critical 12981 rpm. Inlet P 14.7 psia, ratio 9.18, PD 135. 2141 HP, 7041 rpm. Rademaker Mdl HS4008, horiz increaser. SN 22626322. Ratio 3.94, 1.72 SF, torque 1864 lb/ft at speed, 98.6% eff. 2500 HP, input rpm 1785, output rpm 7041. No lube system or driver.
Details
41257COMPRESSORCENTRIFUGAL 9539UNUSED 9,539 acfm Elliott centrifugal compressor. Mdl 38M4, SN A508216T. Design pressure 400 psi, hydro 600 psi, max OT 350/-20 deg F. 56 MW. 20" inlet, 300 psi; 16" discharge, 300 psi. 1st critical 4779 rpm, 2nd critical 12981 rpm. Inlet P 14.7 psia, ratio 9.18, PD 135. 2141 HP, 7041 rpm. Rademaker Mdl HS4008, horiz increaser. SN 22626322. Ratio 3.94, 1.72 SF, torque 1864 lb/ft at speed, 98.6% eff. 2500 HP, input rpm 1785, output rpm 7041. No lube system or drive.
Details
41259COMPRESSORCENTRIFUGAL 15600UNUSED 15,600 acfm Clark centrifugal compressor. Mdl 745B3. MW 17.67, inlet P 265 psia, PD 435. Design pressure 530 psi, hydro 795 psi, max temp 380 deg F. 24" inlet, 300 psi; 20" discharge, 300 psi. 1st critical 5500 rpm, 2nd critical 22000 rpm. 11986 HP, 7344 rpm. Maag Mdl GN70, horiz increaser. Ratio 4.11, 1.9 SF, 98.2% eff. 18000 HP, input rpm 1785, output rpm 7344. SN 745-3-3650F. No driver.
Details
41260COMPRESSORCENTRIFUGAL15600UNUSED 15,600 acfm Clark centrifugal compressor. Mdl 745B3. MW 17.67, inlet P 265 psia, PD 435. Design pressure 530 psi, hydro 795 psi, max temp 380 deg F. 24" inlet, 300 psi; 20" discharge, 300 psi. 1st critical 5500 rpm, 2nd critical 22000 rpm. 11986 HP, 7344 rpm. Maag Mdl GN70, horiz increaser, ratio 4.11, 1.9 SF, 98.2% eff. 18000 HP, input rpm 1785, output rpm 7344. SN 745-3-3651F.
Details
41262COMPRESSORCENTRIFUGAL 1215****UNUSED 1,215 acfm Clark centrifugal compressor. Mdl 553-B-3, SN 553-3-3624. Max working pressure 1000 psig, hydro 1500 psi, max temp 380 deg F. 14" inlet, 600 psi; 12" up discharge, 600 psi. Inlet P 255 psia, ratio 1.96, PD 500, MW 28.6. 1st critical 14900 rpm. 1845 HP, 8908 rpm. Unit and gear mtd on fabricated base. CT-20868A, (1977). Gas-sour HC-28.6 MW. Driven by Phila Mdl 14HS, horiz increaser. Ratio 5.1, torque rated speed max 7354 lb/ft. 2500 HP, input rpm 1785, output rpm 8925. No driver.
Details
42200COMPRESSORCENTRIFUGAL21602,350 scfm, CS, centrifugal nitrogen compressor. Manufactured by JOY, Model # 1A-26. SN BF6232. 2160 ICFM at 115 psi. Design rated speed 3565 RPM, Inlet pressure of 16.7 psia at 70 degrees F. Interstage inlet temperature rated for 105 degrees F, Discharge pressure 118.7 psia. Direct driven by Westinghouse 600 HP, 3/60/480 volt, 3554 rpm motor. Motor frame 5009-H, Serial # 1S-76, Style 75F47443. 2nd and 3rd stage inlet @ 105 F. Cooling water temp 90 deg F. Coolers rated 150 degree F both sides. Skid mounted with intercoolers.
Details
42975COMPRESSORCENTRIFUGAL1139011390/2775 cfm Carrier dual compressor unit. Compressor #1: Carrier centrifugal Mdl 18VP451, SN 3594. Rated 11,390 cfm inlet, 14.6 psi to 60 psia. Compressor #2: Carrier centrifugal Mdl 18W354, SN 3616, 8470 rpm, 2775 cfm, 45 psia inlet to 225 psia outlet. Both compressors driven by (1) 3,000 HP, 3/60/4000 volt, 1700 rpm General Electric motor.
97 Items ReturnedGo To Page: 12345

Add Checked to Quote
 Add to Quote Before Changing Page
  

IPP Sales Contacts Minimize
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931
Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929
Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928
Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043
Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax
Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax
Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax
Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927

     

Home | About Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | News | Media | Contact Us
  Copyright 2002-2010 International Process Plants   Terms Of Use  Privacy Statement   
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association National Demolition Association Turnaround Management Association Association Memberships
Bookmark and Share

Follow Us On Twitter View Our Channel on YouTube