 |
|
Need Help? or Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207381
165 Ton @ -32 degrees F, Dunham Bush horizontal screw refrigeration package. Water cooled design. R22 Refrigerant. Compressor Model 2515/5.40, Horizontal Rotary Screw, rated 3550 RPM, direct coupled to a Siemens 600 HP, 3/60/460 volt motor. Evaprator is a 2 pass, 24" diamter x 176" long, (288) 3/4" x 0.049 x 176" long trufin tube carbon steel tubes. Condensor is a 2 pass, 18" diameter, x 153" long, (228) 3/4" x 0.028" x 153" long tubes, trufin copper tubes. All skid mounted with lubeoil system, and digital control panel. With Westinghouse starter WYE-Delta Closed Transition, NEMA-1 encloser floor mount. Unit dimensions are 212" L x 8"W x 116" H, 24,500 lbs.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Compressors Compressors are designed to compress (over 20 psi) and move air and other gases such as hydrogen, oxygen, nitrogen, etc. IPP's Compressors for sale are listed by the Cubic Feet per Minute or CFM rating and pressure.
The main types of compressors include: - centrifugal compressors
- rotary compressors
- reciprocating compressors
Used Centrifugal Air / Gas Compressors for Sale Centrifugal compressors use centrifugal forces to pump air or gas to develop pressure. They typically operate at speeds of 3500 rpm or higher. Multiple stages are used to produce the required pressure rise. This type of compressor is driven by an electric motor, steam turbine, or gas turbine, with or without speed increasing gears. Rotary compressors, blowers, and vacuum pumps are positive displacement type machines. This type of machine incorporates rotating internal lobes, screws or vanes that compress the gas or air. They are constant volume machines with variable discharge pressure. The volume can be varied only by changing the speed or bypassing or wasting some of the capacity of the machine. The types of rotary compressors are classified by the type of rotor they use. These include: straight-lobe, sliding vane, liquid piston, screw type. Reciprocating compressors are furnished in either single-stage or multi-stage types. The principle parts of this type of machine are the cylinders and the pistons. The different types you will see include single acting air cooled or water cooled, single stage double acting water cooled, horizontal or vertical.
|
|
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 88 Items Returned | Go To Page: | 1 | 2 | 3 | 4 | 5 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 8716 | COMPRESSOR | RECIPROCATING | 716 | 716 cfm @ 60 psi, Gardner Denver horiz reciprocating single staged, water cooled, oil free compressor. Mdl RL-14-CH, Size 14 x 9, SN 480957. Max pressure 60 psi @ 450 rpm. Comes w/following: General Electric 100 HP, 3/60/440 volt, 1750 rpm, Frame 444U, drip-proof motor; Dollinger dry type air filter silencer DS-900B-6; 36" x 8' ASME NB #7118 vert receiver P/N 68F39 w/125 psi working pressure @ 625 deg F; clean air after-cooler P/N D1-332 by Bell and Gossett, NB #481170, SN 155035, rated 125 psi @ 375 deg F for both shell and tubes, and moisture separator. Also w/starter panel and breaker. |
|
|
| 18045 | COMPRESSOR | RECIPROCATING | 300 | 300 cfm @ 100 psi reciprocating compressor. Mfd in France by Crepelle, Mdl 2274, SN 11328, Type 2HX2RT. Belt driven by 60 HP, 3/60/460 volt motor. Complete w/intercooler, automatic lubrication. Skid mtd. |
|
|
| 20702 | COMPRESSOR | RECIPROCATING | 185 | 185 cfm Chicago Pneumatic reciprocating compressor. Mdl 9T, SN 84007. W/40 HP, 460 volt TEFC motor. Inlet pressure 14 psi, outlet 175 psi. Skid mtd, includes receiver, cooler and lube system. |
|
|
| 30283 | COMPRESSOR | RECIPROCATING | 224 | 223.6 cfm Ingersoll Rand 2-cylinder gas compressor. SN X3XE-79. 1st cylinder: 8" bore, 6" stroke, 110.85 nominal discharge psig,170 psig discharge pressure first cylinder, 350 deg F max allow discharge temp, 171.45 cfm. 2nd cylinder: 4.5" bore, 6" stroke, 357.7 nominal discharge psig, 660 psig discharge pressure, 350 deg F max discharge temp, 52.15 cfm. Setup for belt drive, no motor. |
|
|
| 30284 | COMPRESSOR | RECIPROCATING | 224 | 223.6 cfm Ingersoll Rand 2-cylinder gas compressor. SN X2XE-78. 1st cylinder: 8" bore, 6" stroke, 110.85 nominal discharge psig, 170 psig discharge pressure this cylinder, 350 deg F max allow discharge temp, 171.45 cfm. 2nd cylinder: 4.5" bore, 6" stroke, 357.7 nominal discharge psig, 660 psig discharge pressure, 350 deg F max discharge temp, 52.15 cfm. Setup for belt drive, no motor. |
|
|
| 38189 | COMPRESSOR | RECIPROCATING | 1200 | 300 HP Cooper Bessemer Mdl FMP-1 reciprocating compressor. SN 46015. 1937 psi suction, 4185 psi discharge. Single cylinder, 2-stage design. Bore #1, 6.375"; #2 4.375". 10.5" stroke. Rated 300 rpm. Belt driven by 300 HP, 3/60/440 volt, 450 rpm motor. |
|
|
| 38200 | COMPRESSOR | RECIPROCATING | 0 | Cooper Bessemer compressor cylinder. Type CMXH105. Bore 2.25, stroke 10.5. |
|
|
| 38203 | COMPRESSOR | RECIPROCATING | 0 | Cooper Bessemer 2-stage compressor cylinder. Type CMC-14-1. Bore 4.375", stroke 10.5". In tandem w/bore 6.375", stroke 10.5". Type CNC105. Suction 1937 psi, discharge 4185 psi. |
|
|
| 38213 | COMPRESSOR | RECIPROCATING | 0 | Cooper Bessemer compressor cylinder. Type CRDC1052, SN 30336. Bore 5.625, stroke 10.5. 6000 psi. |
|
|
| 38220 | COMPRESSOR | RECIPROCATING | 0 | Cooper Bessemer compressor cylinder. Type CC-105. Bore 7.25, stroke 10.5. |
|
|
| 45964 | COMPRESSOR | RECIPROCATING | 9 | 9 cfm @ 250 psi, Aminco vert compressor. Mfd by Corblin (France), SN C2080. 0 psi suction, 250 psi discharge. 350 rpm. Driven by 7.5 HP varispeed drive 3/60/220/440 volt, 438 rpm min, 1750 rpm max. |
|
|
| 45966 | COMPRESSOR | RECIPROCATING | 25 | 25 scfm @ 425 psi discharge, Aminco vert compressor. Mfd by Corblin (France), SN C2088. 35 psi suction. 7 1/2 HP varispeed drive 3/60/220/440 volt, 438 rpm min, 1750 rpm max. |
|
|
| 70048 | COMPRESSOR | RECIPROCATING | 617 | Approx 617 cfm @ 100 psi, Ingersoll Rand air compressor. Mdl ESH, SN CE25703, Size 14x11. V-belt driven by 150 HP, Induction 3/60/440 volts, 1770 rpm drip-proof motor. |
|
|
| 82845 | COMPRESSOR | RECIPROCATING | 600 | Approx 600 cfm @ 110 psi, Ingersoll Rand 2-stage reciprocating air compressor. Size 14-1/2x8-1/4x6-NL-2, SN W15TE-N-23-S. 700 rpm. (2) cylinders. Direct coupled to 125 HP, 3/60/230/460 volt TEFC motor, Frame 6333Y. |
|
|
| 83219 | COMPRESSOR | RECIPROCATING | 0 | Pennsylvania compressor cylinder. SN 10781-A. Rated 185 psig @ 90 deg F. 9" stroke, 12" bore. |
|
|
| 87818 | COMPRESSOR | RECIPROCATING | 0 | Clark CS compressor cylinder. Mdl VTH. 14.000 stroke, 9.750 bore. |
|
|
| 87824 | COMPRESSOR | RECIPROCATING | 0 | Cooper Bessemer CS compressor cylinder. Mdl C5B14, SN 11817. 14.000 stroke, 15.000 bore. 525 psi. |
|
|
| 87831 | COMPRESSOR | RECIPROCATING | 150 | Worthington reciprocating compressor. Type 18x17. Driven by 40 HP, 3/60/440 volt motor, UL label. (2) units mtd on (1) base. W/Manzel force feed lubricator. |
|
|
| 87832 | COMPRESSOR | RECIPROCATING | 621 | 621 cfm Worthington reciprocating air compressor. Mdl HB3, Size 15x10x7-11. 280 rpm. Air cooled. Driven by 75 HP, 3/60/440 volt, 1750 rpm motor, UL label. W/Buffalo tank, rated 150 psi/full vac. |
|
|
| 90228 | COMPRESSOR | RECIPROCATING | 165 | 165.5 cfm @ 21 bar, single stage air compressor. Mfd by Grasso, SN 92031695, Type RC49, blt 1992. Max 1450 rpm, max temp 140 deg C. Max flow rated 281.1 cu meter/hr. Refrigerant NH3. Belt driven by 15 KW, 3/50/415 volt, 1460 rpm flameproof motor. With on/off switch. Base mtd. |
| 88 Items Returned | Go To Page: | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
IPP Sales Contacts
|
 |
|
Keith West Global Sales KeithW@ippe.com +1 609 838 5931 | Amanda Vagell Global Sales AmandaV@ippe.com +1 609 838 5929 | Patti Buchman Global Sales PattiB@ippe.com +1 609 838 5928 | Ray Wagner Global Sales RayW@ippe.com +1 609 838 6043 | Regina Zarmer Europe Sales & Acquisitions ReginaZ@ippe.com +49-306-594-2445 Office +49-172-313-8439 Mobile +49-30-6594-2448 Fax | Jo Petrie, Sales Engineer UK, Scandinavia, Spain, & So.Africa jop@ippe.com +44 (0)1642 367 910 Office +44 (0)1642 367 913 Direct +44 (0)7770 748884 Mobile +44 (0)1642 367 920 Fax | Bohumil Cuta, E. Europe Sales & Acquisitions BohumilC@ippe.com +42-054-821-6680 Office +42-060-273-7517 Mobile +420-5-481-22240 Fax | Elisa Lucumi Central & So. America Sales ElisaL@ippe.com +1 609 838 5927
|
|
|
|
|
|
|
|