RegisterLogin

Sell Your Equipment

Have surplus or idled equipment assets? Turn them into cash you can use to help your business by selling to IPP.

Learn About IPP's Purchase Capabilities

See Specific Plants & Equipment We are Looking to Buy

Need Help? or
Have something for sale? USE THIS FORM:
  

Featured Equipment
Equipment Rotator image
Equipment Rotator image 1 of 10 Equipment Rotator imageEquipment Rotator imageEquipment Rotator image
214861
Unused 3746 SqFT, Melter SA DE C.V. Shell and Tube Heat Exchanger. 304SS Tubes / 304SS Heads / CS Shell, National Board number 212, Serial Number MDI-333-3-4, Built 2007, Type NEN Horizontal. Rated
Read More...
 
  

 

Used Dryers and Industrial Process Drying Equipment

IPP's inventory of over 600 types of dryers and drying equipment for sale includes used, new/unused and reconditioned dryers for many industrial processes. Try narrowing your search using the 24 sub-group categories first and then use the search box to find what you need.

Guide to Types of Used Dryers & Drying Equipment

Types of Dryers Used in Both Batch & Continuous Processes

Manufacturers/brands in stock may include: Glatt, Niro, Fitzpatrick, Aeromatic, Sahara, Caltherm and others.

  • Fluid Bed Dryers: Found in batch and continuous processes. Product flows across a perforated bed while hot air blows through the bed. Continuous dryers vibrate to move the product while batch dryers use agitators. Popular in pharmaceutical plants. Measured by the Kg/Hr.
  • Oven Dryers: Heated boxes that are either hot air or steam heated. Can operate at atmospheric pressure. Measured by oven's internal dimensions.
Photo of Used Dryers & Industrial Process Drying Equipment
BATCH DRYERS

Manufacturer / Brands typically in stock:

  • Vickers
  • Struthers Wells
  • Stokes
  • Buss AG Basel Schwein
  • Bethlehem
  • Devine
  • APV/Mitchell
  • Buflovak
  • Zschokke Wortmann AG
  • Spangler and Kaufman
  • Northstar
  • Simpson-Turner
  • Hull
  • Vacuum Dryers: Batch dryers using a vacuum to dry wet products where tumblers, paddle and ribbon agitators or pans move the product. You'll find used vacuum dryers in these categories: double cone, twin shell, rotary vacuum (aka vacuum rotary) and pan dryers.
  • Vacuum Shelf Dryers: vacuum dryers where product is dried on trays sitting on heated shelves. Typically rated for heating only, do not have movable shelves and are measured by the shelves' surface area.
  • Freeze Dryers (Lyophilizers): Low temperature batch dryers, identical to shelf dryers, except they use low temperatures and shelves may be moveable. Common in pharmaceutical production. Measured by the shelves' surface area.
CONTINUOUS DRYERS
Manufacturer / Brands Typically In Stock:
  • Anhydro
  • APV/Mitchell
  • Bepex
  • Bethlehem
  • Blaw Knox
  • Bowen
  • Buss-SMS-Canzler
  • Escher Wyss
  • Heyl & Patterson
  • Luwa
  • Kaiser Steel Belt Systems
  • KraussMaffei
  • Niro
  • Reitz
  • Raymond
  • Proctor & Schwartz
  • Sandvik
  • Stork
  • Wyssmont
  • Conveyor Dryers: use conveyors to move product through drying chamber or trough. Some are heated or use vacuum conditions. You'll find used conveyor dryers in these sub-group categories:
    • Holoflite, hollow screw, thermal Screw, thermal disc dryers - use troughs, measured by trough's dimensions or number of screws.
    • conveyor belt dryers - product moves through heated chamber on continuous horizontal belt. Measured by chamber diameter and belt length.
    • Porcupine Dryers: Specially designed conveyor type with trough and internal screw conveyor. Some are jacketed and rated for internal pressure.
    • Flash Dryers / pneumatic conveyor dryers: conveys product through heat source and pulverizers before discharge into an air classifier. Measured by dryer's air flow in CFM.
  • Spray Dryers: atomizes liquids into fine spray which dries into fine particles as it floats down through heated chamber, whose diameter is the key measurement. Popular for instant milk, instant tea and pigments.
  • Drum Dryers: heated drum or set of 2 drums where the product is dried on the outside of drum as it rotates toward blade that scrapes it off. Used for milk drying and cereals. Measured by the diameter and length of the drum.
  • Drum Flakers - Similar to drum dryers except use a cooling process to flake the product being dried.
  • Belt Flakers - Belt flakers are conveyor belt dryers that also use cooling where the belt is cooled to dry the product. It hardens and flakes off.
  • Thin Film Dryers: used to convert heat-sensitive liquids, sludges, slurries and pastes into free-flowing solids. Can be horizontal or vertical, some operate under vacuum and are usually measured by the drying surface area.
  • Wyssmont Dryers: have cylindrical housing that contains stack of trays that rotates while hot air blows through the housing. The product is fed at the top and then scraped onto the next tray below continually moving down stack.
  • Continuous Rotary Dryers: Some use Hot Air or direct flame as heat source while others use steam heated tubes. Have large and long cylindrical tubes that dry the product as it tumbles through the rotating tube. Measured by diameter and length of the tube.

Other Dryer Types

  • Air Dryers: find industrial dehumidifiers, dehumidifying dryers, regenerative dessicant dryers, refrigerated dryers, dryers using hot or cool air as well as those used with compressors to remove moisture from compressed air. Measured by CFM. Manufacturers/brands can include Pneumatech, Ingersoll Rand, Hankinson, Arrow, Bartlett-Snow and others.
  • Food Grade Dryers are found in spray dryers, fluid bed dryers and horizontal belt dryers

What is an Industrial Dryer?

An industrial dryer is any processing plant machine that removes moisture to produce a dry, solid product. For dry powders, dryers are typically located near the end of the process line. In chemical or pharmaceutical plants, dryers are typically used after centrifuges or filters have removed most of the moisture in the product.

Because most products dry faster in a vacuum than in atmospheric pressure, you will see dryers with heating jackets and ratings for internal pressure and for vacuum conditions. Other products can be dried economically in a simple , industrially sized hot air oven dryer. Common accessories for dryers include dust collectors and vacuum pump systems.

Equipment Search

IPPE Used Process Equipment Search


Enter a product number or part of its description below and click SEARCH
  Search View Quote Contents


Finally, you may filter the results based on capacity below

    Narrow Results by Capacity

Add Checked to Quote
 Add to Quote Before Changing Page

41 Items ReturnedGo To Page: 123
  Stock NumberProductSub GroupCapacityDescription
Details
IPP Equipment Search Image 28792DRYERFLAKER DRUM AND BELT6060" x 144", CS Blaw Knox drum flaker. SN 17001. Drum driven by 10 HP, 3/60/220/440 volt Reeves varidrive. Grooved drums, 1/8" groove every 1". 316SS vac chamber housing. W/spare drum. Roll face is grooved on 1' spacings.
Details
IPP Equipment Search Image 34426DRYERFLAKER DRUM AND BELT968" dia x 11 1/2" long, Stokes 2-roll chrome plated flaker. Mdl 214-501, SN P65441. Has cored rollers for heating and cooling. Rolls rated 100 psi int. Has knife discharge. Fixed roll spacing. Direct driven by UL label, 3/4 HP, 3/60/220/440 volt, 1725 rpm Masters gearhead varispeed motor. Skid mtd.
Details
IPP Equipment Search Image 41588DRYERFLAKER DRUM AND BELT3030" dia x 72" face, Stokes chrome plated single drum flaker. Mdl 900-115-504, SN 28075. Gear driven, motor missing. Has Link Belt gear reducer rated 1750 rpm input, Size HWB70-35. Cored drum rated 50 psi (no rotary joints w/drum). Unit has SS housing w/12" x 20" sight doors and jkt trough. SS knife discharge. Openings: drum 2-1 1/2". Includes spare drum.
Details
IPP Equipment Search Image 43689DRYERFLAKER DRUM AND BELT32****32" x 50' long 316SS Sandvik belt flaker. Main drive 2 HP, 3/60/230/460 volt US varidrive, 45 rpm max, 11 rpm min. 42" wide x 3" deep trough. W/12" Bayley blower and steam coil. 3' wide CS delumper, belt driven by 2 HP, 3/60/230/460 volt, 1750 rpm gear drive.
Details
IPP Equipment Search Image 45123DRYERFLAKER DRUM AND BELT39****39" dia x 6'6" long (1 meter x 2 meter) chrome plated single roll flaker. Mfd by Escher Wyss, SN 536. Cored drum rated 8 ATU (116 psi) int. Unit gear driven one end. Requires scraper, trough and drive. W/unit is spare NEW UNUSED chrome plated roll.
Details
IPP Equipment Search Image 49609DRYERFLAKER DRUM AND BELT42****42" dia x 6' face, chrome plated drum only. Cast iron construction. Cored drum rated 45 psig.
Details
IPP Equipment Search Image 70983DRYERFLAKER DRUM AND BELT2828" dia (700mm) x 5' face (1500mm), chrome plated single drum flaker. Mfd by APV Mitchell Dryers (England). Drum pressure 0.42 bar. Applicator roll belt driven by .25 KW, 3/50/380 volt, 1425 rpm non-flameproof motor via 725 rpm Fenner gear box, DC thyristor controlled varispeed drive. Roll speed 10-100 rpm. Heating low pressure steam system of 0.1 bar. Doctor manual adjustable knife made of CS. Drum gear driven by 4 KW, 3/50/380 volt, 1440 rpm flameproof motor w/variable speed 21.5:1 ratio Carter gear reducer. Drum speed 2-18 rpm. Drum and applicator roll cored for steam/cooling. Base mtd.
Details
IPP Equipment Search Image 76615DRYERFLAKER DRUM AND BELT3636" face x 32" dia Bethlehem/Simons chrome plated chill roll. Unit has (2) 36" long x 12" dia feed rolls, cored for heating/cooling. (1) feed roll driven by 3 HP, 3/60/230/460 volt Reeves varidrive, other feed roll fixed. Product is pressed onto main chill roll by rubber belt w/adjustable thickness control roller. Knife discharge off chill roll into 4" screw conveyor w/approx 3/4 HP drive. Main chill roll has slightly grooved surface and driven by Reeves varidrive. Unit skid mtd w/wheels.
Details
IPP Equipment Search Image 78776DRYERFLAKER DRUM AND BELT NEW UNUSED 31 1/2" wide x 60' long 304SS belt only for flaker. Rubber gasket on both sides.
Details
IPP Equipment Search Image 81462DRYERFLAKER DRUM AND BELT4848" dia x 60" face, chromed CS drum flaker. Mfd by Buflovak, SN 17716. Cored drum for cooling. Pneumatic operated scraper knife. CS pan. Chain driven by Reeves varidrive, 3 HP, 3/60/208/220/440 volt, 1725 rpm, 86.5:1 ratio, max 48.5 rpm, min 4.85 rpm output. 12" wide x 6' long screw discharge, belt driven by approx 1 HP motor. 12" x 12" discharge outlet.
Details
IPP Equipment Search Image 88712DRYERFLAKER DRUM AND BELT 48X03048" x 30' Sandvik belt flaker. 304SS belt. Driven by Reeves varidrive, 2 HP, 3/60/230/460 volt, output 60 rpm max, 6 rpm min.
Details
IPP Equipment Search Image 94347DRYERFLAKER DRUM AND BELT3030" wide x 21'6" long, North American Process 304SS belt flaker. SN N85606. 16' long drying section. Driven by approx 1 HP drive.
Details
IPP Equipment Search Image 95892DRYERFLAKER DRUM AND BELT4848" dia x 48" face, chrome plated drum flaker. Manufactured by Buffalovac Equipment Division, NB # 6281, XR 15539, T5155A. Working pressure 20 psi max int pressure at 350 degrees F . Scraper discharge. W/48" long x 16" dia SS applicator roll driven by approx 1/2 HP Reeves varidrive. Chrome plated drum and applicator roll.
Details
IPP Equipment Search Image 98426DRYERFLAKER DRUM AND BELT1616" wide x 15' long, Sandvik 304SS belt flaker. SN TC1001, Type belt (continuous). Rubber side guards on belt, 12' long cooling section on top and btm of belt. Setup for chain drive (drive missing). Rubber traction guides on btm of belt. 1" high rubber side walls. Scraper discharge.
Details
IPP Equipment Search Image 98914DRYERFLAKER DRUM AND BELT4848" dia x 84" long, chrome plated drum flaker. Blaw Knox, SN 14769. Drum rated 40 psi, jkt pan rated 50 psi. Gear driven by 7 1/2 HP, US varidrive, 3/60/220/440 volt, output min 25 rpm, max 125 rpm. 316SS hood w/5" top opening. Knife discharge.
Details
IPP Equipment Search Image 98915DRYERFLAKER DRUM AND BELT4848" dia x 84" long, chrome plated drum flaker. Blaw Knox, Serial Number14770. Drum rated 40 psi, jacketed pan rated 50 psi. Gear driven by 7 1/2 HP US varidrive, 3/60/220/440 volt, output min 25 rpm, max 125 rpm. 316SS hood w/5" top opening. Knife discharge.
Details
IPP Equipment Search Image 103635DRYERFLAKER DRUM AND BELT2222" dia x 42" face, chrome plated drum flaker. Scraper discharge. Jkt trough, CS jkt, SS cover. Unit is belt driven by 4 KW, 3/60/415 volt, 1420 rpm motor thru Radicon gear reducer, 50:1 ratio. Outboard bearings. Water cooled.
Details
IPP Equipment Search Image 103636DRYERFLAKER DRUM AND BELT4242" dia x 54" face, 316SS drum flaker. Jacket stamped 150 psi with hydro test at 275 psi. Scraper discharge. Jkt trough, CS jkt, SS cover. Unit is belt driven by 4 KW, 3/50/415 volt, 1420 rpm motor thru Borg Warner gearbox, ratio 40:1. Outboard bearings. Water cooled. Openings: Rotary joint 1-2/2.5", 1-2", jacket 2-1", 3-3".
Details
IPP Equipment Search Image 104421DRYERFLAKER DRUM AND BELT605' x 6'6" long Blaw Knox chrome plated single drum flaker. Outboard bearings. Packing gland.
Details
IPP Equipment Search Image 108312DRYERFLAKER DRUM AND BELT48UNUSED 48" x 66" Blaw Knox CS single drum dryer. Serial # 17246. CS plated drum. Agitated trough knife discharge. Packing gland, outboard bearings. Chain driven by Reeves vari drive rated 5 HP, 3/60/460 volt, 1730 rpm. 68 rpm max. 17 rpm min. 3.4:1 ratio. Unit enclosed with shroud w/sight panels. 12" fume exhaust. Mounted on CS skid.
41 Items ReturnedGo To Page: 123

Add Checked to Quote
 Add to Quote Before Changing Page

  

IPP Sales Contacts Minimize

Keith West
Global Sales
Email Keith
Direct: 1-609-838-5931
Office: 1-609-586-8004

Amanda Vagell
Global Sales, Israel
Email Amanda
Direct: 1-609-838-5929
Office: 1-609-586-8004

Patti Buchman
Global Sales
Email Patti
Direct: 1-609-838-5928
Office: 1-609-586-8004

Brian Brink
Global Sales
Email Brian
Direct: 1-609-838-6041
Office: 1-609-586-8004

Western Europe
Sales & Acquisitions
France, Belgium, Germany, Luxembourg, Netherlands, Denmark, Switzerland, Liechtenstein

Regina Zarmer
Click to email Regina
Office: 49-306-594-2445
Mobile: 49-172-313-8439

UK, Scandinavia, Africa, Southern Europe, Mid East (except Israel)
Sales & Acquisitions

Greenland, Monaco, San Marino, Italy, Malta, Andorra, Gibraltar, Greece, Finland, Norway, Sweden, Iceland, Faroe Islands, Turkey, Cyprus

Office: 44 (0)1642-367-910
Fax:    44 (0)1642-367-920

Jo Petrie
Click to email Jo
Direct: 44 (0)1642-367-913 Mobile: 44 (0)7770-748-884

Nicola Douglas
Click to email Nicola
Mobile: 44 7940 981 681

Eastern Europe, Western Asia Sales & Acquisitions
Czech Rep, Slovakia, Slovenia, Poland, Romania, Hungary, Ukraine, Lithuania, Bulgaria, Bosnia, Albania, Croatia, Serbia, Belarus, Estonia, Latvia, Macedonia, Moldova, Russia, Georgia, Bashkortostan, Kazakhstan, Kirghizia, Krygyzstan, Tajikistan, Turkmenistan, Uzbekistan, Armenia, Azerbaijan 

Bohumil Cuta
Click to email Bohumil
Office: 42-054-821-6680
Mobile: 42-060-273-7517

Central & South America, Caribbean Sales

Office: 1-609-586-8004
Elisa Lucumi
Click to email Elisa
Direct: 1-609-838-5927

Edis Castillo
Click to email Edis

 

     

Home | About Us | News | Contact Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | Mailing List | IPP's eBay Store | PDF Downloads | Events
  Copyright 2002-2014 International Process Plants   Terms Of Use  Privacy Statement   
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association National Demolition Association Turnaround Management Association Association Memberships