New search | Used EVAPORATOR | Used WIPED/THIN EVAPORATOR

<= >=

Filter Capacity

80 Items Returned Go To Page: 1 2 3 4
		Stock Number	Product	Sub Group	Capacity	Description
Select		4618	EVAPORATOR	WIPED/THIN	36	36 sq ft Kontro 316SS vert "Thermalizer". 24" dia x 72" str side. Mdl 36-6-4, SN 6049, NB #231. Has (2) jkt thermal sections: btm section has 12" CS jkt; 2nd section has 12" plate coil. Designed for 35 psig and full vac int, 100 psi @ 300 deg F jkt. V-belt drive, no motor. Openings: 1 1/2" inlet, 3" product outlet. Mech seal on shaft.
Select		8204	EVAPORATOR	WIPED/THIN	173	173 sq ft Luwa 316LSS thin film evaporator. W/20 HP volt belt motor drive, UL label. Mdl NL4-850/6300/18 SPEC, SN #16173, full vac int, 150 psi jkt, equipped w/special lower bearing support arrangement and enlarged outlet 60" dia attached to approx 1,000 gal 316LSS jkt receiver w/inverted 15 HP Phila anchor agit drive, PTEM-16, full vac int, 200 psig jkt. Gear ratio 87.5:1. Double mech seal. Internally mtd detraining baffles, rotor has 1" clearance.
Select		13446	EVAPORATOR	WIPED/THIN	1	1 sq. ft. Rodney Hunt 316 SS vertical wiped film evaporator system. SN O-128-E. SS jacket rated 250 psi, internal rated 15 psi. Evaporator chamber measures 3 1/2" diameter x 16" straight side, with 5 1/2" x 10" vapor section. Mounted on stand with a 6" x 26" condensor, 4" x 24" condensor and Nash H3 vacuum pump. Driven by 5 HP, 3/60/220/440 volt motor.
Select		18493	EVAPORATOR	WIPED/THIN	108	107.6 sq ft (10 sq m), Pfaudler glass lined wiped film evaporator. Mfd by Balfour/Sybron, SN 1, Order #48621, NB #27. Lined w/glass #3115. Rated full vac int @ 392 deg F; CS jkt 98 psi @ 392 deg F. ASME Code constructed. Has glass covered int rotor w/graphite wipers. Retaining pins and rotor shaft are titanium. Has 3-sections: clamped dish entrainment section, 48" dia x 42" str side; jkt body section, 48" dia x 9'10" str side; and clamp jkt cone btm. Drive is Pfaudler Type VS80-U21983, belt driven by approx 10 HP motor w/mech seal on shaft. Openings: top section 4-4", 1-20" vapor outlet; 6" on cone btm.
Select		19581	EVAPORATOR	WIPED/THIN	173	173 sq ft Luwa thin film evaporator. 316LSS wetted parts w/titanium stabilized shell. Mdl L850/6300/HT, SN 16116. (4) section jkt rated 75 psi @ 650 deg F. Special "K" type rotor w/06 clearance off wall. 33 5/8" dia x 26'4" long. Spider ring, dual action separator. Double mech seals. Conical btm discharge w/Warren screw pump on discharge, Mdl 3FSXH, jkt, driven by 7.5 HP DC drive, 2 to 10 gpm. Openings on evaporator include 20" vapor outlet, and 2" jkt connections. Rotor driven by 60 HP US varidrive with 3/60/460 volt TEFC motor, and Falk reducer. 150 to 615 rpm output. Side lug mtd. 36 1/4" dia x 29' overall height.
Select		20067	EVAPORATOR	WIPED/THIN	34	****34.4 sq ft Luwa vert wiped film evaporator. Material 316SS/TI (1.4571). Shell 22" dia x 87" long, entrainment separator 24" dia x 40" long. Expansion joint on shell. Mdl L-425. Jkt rated 25 ATM @ 230 deg C. Internal rated full vac @ 230 deg C. Rotor rebuilt and unused since rebuilding. SN 4048. Jkt 25 ATV @ 250 deg C. Vapor nozzle 16" dia. 3" btm discharge.
Select		23736	EVAPORATOR	WIPED/THIN	4	4 sq ft (.4M2) Canzler wiped film evaporator, 316 SS/TI (1.4571). SN 12952. Jkt rated 26 ATU @ 200 deg C, int rated full vac @ 200 deg C. Shell 12" dia x 42" long, bolted in (2) sections. Jkt 316 SS, 16" dia x 21" long. Driven by 0.45KW, 3/50/220/380 volt, 1420 rpm XP motor, direct coupled to varidrive gear reducer, mfd by Prym, 457-93.4 rpm output. Mech seal on shaft. (4) lugs for mounting.
Select		28985	EVAPORATOR	WIPED/THIN	40	****40 sq ft vert SS wiped film evaporator system. 2' dia x 4' str side w/bolted 18" cone btm. CS jkt. Set up for 7 1/2 HP motor (no motor w/unit). 30" dia x 4' high SS pot welded to top w/flat bolted cover. System includes approx 500 sq ft vert condenser, rated full vac on SS and 60 psi tube side, multi-pass. 4" outlet center btm. Condenser mfd by Pemco, SN 131.
Select		31274	EVAPORATOR	WIPED/THIN	54	****5 sq meter, 321SS (1.4541) wiped film evaporator. 570 MM x 3946 MM plus 600 MM conical section. Manufactured by SMS Germany, Mdl B450/1007, SN A-13-637. Jacket rated 15 ATU @ 250 deg C, internal rated vacuum @ 250 deg C. Repaired 1970. Entrainment separator and conical bottom have 316SS dimple jacket. 316SS jacket on straight side is made in 4-sections. (4) rigid rotor blade inside. Also included spare rotor w/flexible wiper blades. Motor not included. Openings: entrainment section 1-400mm , 1-300mm ; shell 2-75 mm, 11-50mm ; 150 mm center bottom outlet.
Select		31726	EVAPORATOR	WIPED/THIN	50	50 sq ft Blaw Knox 304LSS thin film evaporator system. Roto-Vak Mdl. Mfd by Buflovak, SN 15216. Rated 15 psi and full vac int @ 400 deg F, 165 psi @ 400 deg F jkt. ASME code constructed, NB stamped. Sanitary construction. Rotor underdriven by 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor speed. Unit has external upper & lower bearings, mech seals on shaft. Unit has 3" feed port and 10" x 24" discharge into centrifugal vapor/liquid separator. Separator is 304SS, 40" dia x 68" str side w/welded dished top, 36" deep cone btm. Openings in the separator: top 1-8"; side 1-18" w/cover & sight glass, 10" x 24" tangential; btm 1-3" discharge. W/system is 565 sq ft, 304LSS shell side, CS head, horiz condenser with 3/4" OD x 18 bwg, 304LSS tubes, 143" long. 6 pass tube side. 18" dia 304ELC SS shell 161" overall length. CS channels. Unit designed for 30 psi & full vac @ 400 deg F shell side; 100 psig @ 400 deg F tube side. Openings: shell 1-10", 1-3"; channels 2-4" one head, (2) 3/4" other head. Mfd by Patterson Kelly. Also w/unit is an 81 sq ft aftercondenser. Mfd by Graham, 304SS shell side, CS tube side. Unit rated 50 psig/full vac @ 150 deg F shell side; 75 psig @ 150 deg F tube side. Asme code constructed. 8" dia shell, 8' long tubes, 9'11" overall length. The feed pumps are Moyno rotary pumps: (1) Type SSQ, Frame 2L, 3" x 2", driven by 1 1/2 HP Reeves varidrive 3/60/220/440 volt; the other is Mdl 1L3, Type SSQ, driven by 3/4 HP motor 3/60/220/440 volt, 1725 rpm. Feed tanks are vert 6' dia x 5'6" str side, flat top & btm, 1100 gal 304SS, w/1-18" top opening; 2-2", 2-1" side; 2" btm outlet. Addl equipment in the system includes 10" dia x 20' high 304SS column; 22" dia x 46" str side, weld dish top & btm tank and 4 gpm x 75' TDH, 1 x 1.5 Goulds SS pump. 1/2 HP, 3/60/220/440 volt mtr. System originally designed for 18-22% weight emulsified polymer feed, 1380 lbs of water evaporation per hour.
Select		31727	EVAPORATOR	WIPED/THIN	50	50 sq ft Blaw Knox 304LSS thin film evaporator system. Roto-Vak Mdl. Mfd by Buflovak, SN 15216. Rated 15 psi and full vac int @ 400 deg F, 165 psi @ 400 deg F jkt. ASME code constructed, NB stamped. Sanitary construction. Rotor underdriven by a 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor speed. Unit has external upper & lower bearings, mech seals on shaft. Unit has 3" feed port and a 10" x 24" discharge into a centrifugal vapor/liquid separator. Separator is 304SS, 40" dia x 68" str side w/welded dished top, 36" deep cone btm. Openings in the separator: top 1-8"; side 1-18" w/cover & sight glass, 10" x 24" tangential; btm 1-3" discharge. W/system is 565 sq ft, 304LSS shell side, CS head, horiz condenser with 3/4" OD x 18 bwg. 304LSS tubes, 143" long. 6 pass tube side. 18" dia 304ELC SS shell 161" overall length. CS channels. Unit designed for 30 psi & full vac @ 400 deg F shell side; 100 psig @ 400 deg F tube side. Openings: shell 1-10", 1-3"; channels 2-4" one head, 2-3/4" other head. Mfd by Patterson Kelly. Also w/unit is an 81 sq ft aftercondenser. Mfd by Graham, 304SS shell side, CS tube side. Unit rated 50 psig/full vac @ 150 deg F shell side, 75 psig @ 150 deg F tube side. ASME code constructed. 8" dia shell, 8' long tubes, 9'11" overall length. The feed pumps are Moyno rotary pumps: (1) Type SSQ, Frame 2L, 3" x 2", driven by 1 1/2 HP Reeves varidrive 3/60/220/440 volt. The other is Mdl 1L3, Type SSQ, driven by 3/4 HP motor 3/60/220/440 volt, 1725 rpm. Addl equipment in the system includes 10" dia x 20' high 304SS column: 22" dia x 46" str side, weld dish top and btm tank and 4 gpm x 75' TDH, 1x1.5 Goulds SS pump, 1/2 HP, 3/60/220/440 volt motor. System originally designed for 18-22% emulsified polymer feed, 1380 lbs of water evaporation per hour.
Select		32809	EVAPORATOR	WIPED/THIN	214	****214 sq ft Hitachi Ltd CS dual wiped film evaporator system. CRN #4972-6, 4972-7. Jkt rated 660 psi @ 572 deg F, int rated 28 psi @ 572 deg F. Unit has (2) separate 107 sq ft evaporators. Shell .984" thick, jkt .630" thick, head 2.047" thick. SN 8032994, 8032995. Each unit has top mtd 100 HP motor and drive. Gearbox mfd by Ichikawa Mach Ind, 17.53 ratio, 1150 rpm input, 65 rpm final rotor speed, belt driven by 100 HP, 3/60/575 volt, 1180 rpm motor. Mech seal on shaft. Each evaporator overall dimensions are 40" OD x 23' str side plus 7' for drive. Evaporator has cone btm w/5 HP rotary valve on discharge. W/each evaporator is shell and tube condenser rated 660 psi @ 572 deg F shell side, 430 psi @ 572 deg F tube side. Mfd by Hitachi, SN 8032997. 26" dia CS shell, 18' overall length. System has evaporation cpacity of approx 11,000 lbs/hr solvent. Designed for continuous operation.
Select		34126	EVAPORATOR	WIPED/THIN	40	40 sq ft Artisan Hastelloy C276 shell, 316SS rotor, rototherm horiz wiped film evaporator. SN 81343, NB #368. Jkt rated 125 psi @ 350 deg F, int rated full vac @ 350 deg F. CS jkt on 6' of str side. Unit requires 15-25 HP drive Mechanical seal. Mtd on saddles. Openings: top 1-6"; btm 1-1", 1-4". Rotor and wipers 316SS.
Select		34417	EVAPORATOR	WIPED/THIN	50	50 sq ft SS wiped film evaporator. 24" dia x 8' long CS jkt shell w/36" cone btm and 4'6" long entrainment section on top. Unit has (6) flexible wiper blades. No drive. Mech seal on shaft. Openings: shell 1-16", 1-2", 1-1 1/2"; btm 1-6". Mounts on (4) lugs.
Select		36043	EVAPORATOR	WIPED/THIN	30	****2.8 sq meter (30.1 sq ft) 316SS (4VA) wiped film evaporator. Mfd by Luwa (Switzerland), Mdl L-407. Jkt rated 7 ATU, int rated full vac. Shell 540MM dia (21.3") x 2767MM long (109"). 2-section jkt. Conical btm is jkt. Entrainment separator is 633MM dia (25"). Shaft has (8) rigid rotors.
Select		38727	EVAPORATOR	WIPED/THIN	20	20 sq ft thin film evaporation system. Consists of 20 sq ft Artisan horiz 316SS thin film evaporator. Int rated 15 psi/full vac @ 400 deg F, jkt rated 150 psi @ 400 deg F. NB #347, Mdl 63595. 316SS rotor. Shell 2' dia x 5'6" long; btm head 2' dia x 2' long. Segmented. Mech seal. Belt driven by 7.5 HP, 1170 rpm, 3/60/230/460 volt motor. Openings: 1-1 1/2", 1-3/4", 2-1", 1-4", 3-2". w/belt guard. Mtd on saddles.
Select		42317	EVAPORATOR	WIPED/THIN	158	158 sq ft 304SS votator turba-film processor. Mfd by Chemetron, Mdl 36-316, SN A3630, NB #379. ASME Code constructed. CS jkt rated 150 psi @ 400 deg F, int rated full vac @ 400 deg F. #4 polish on all internal surfaces. Mech seal on shaft. 6-blade rotor designed for .050" wall clearance. Rotor belt driven by 40 HP, 3/60/220/440 volt, 1800 rpm TEFC motor. Rotor speed 225 rpm.
Select		43692	EVAPORATOR	WIPED/THIN	65	6 sq meter (64.5 sq ft) wiped film evaporator. 316SS body, rotor and jkt. Mfd by Luwa (Germany), Mdl KV600, SN 4254001. Jkt rated 20 bar @ 300 deg C, int rated full vac @ 300 deg C. 6-blade rigid rotor. Shell 690mm dia x 6 meter long.
Select		45121	EVAPORATOR	WIPED/THIN	22	****22 sq ft Rodney Hunt/Luwa 304SS "Turba-film" evaporator. Mdl 12-96, SN 3-101-E. Jkt rated 150 psi, int rated 15 psi/full vac. Unit has mech seal on shaft and drive pulley. Requires 15 HP motor. Thermal section is 12" dia x 96" high. Entrainment separator above rotor. Conical btm head. Openings: 1-1 1/4" feed; 1-8" vapor outlet; 2" btm outlet.
Select		49898	EVAPORATOR	WIPED/THIN	70	****70 sq ft 316SS Kontro wiped film evaporator. SN 81572, Type R-49-3-1H-70. 1/2 shell mfd by Artison, NB #581, SN 81572, rated 25 psi @ 750 deg F. Unit measures 48" dia x 11'6". Has removable 18" dia rotor. Mechanical seal. Has 1/2 CS jkt w/expansion joint. Has outboard bearings. Has 12" dia inlet, 8" dia outlet. Belt driven by 40 HP, 3/60/208/220/440 volt, 885 rpm motor, UL label. Mtd on weld saddles.
80 Items Returned Go To Page: 1 2 3 4