New search | Used EVAPORATOR

136 Items Returned Go To Page: 1 2 3 4 5 6 7
		Stock Number	Product	Sub Group	Capacity	Description
Select		2571	EVAPORATOR	CRYSTALLIZER/EVAPORATOR	7	****7' dia Struthers Scientific "Krystal" continuous crystallizer. (Similar to OSLO evaporative crystallizer). SN 69-05-10057. Vaporizer body and suspension container are rubber lined. Vaporizer body is 7' dia x 12' str side, dish top, cone btm, mtd directly on suspension container, 9' dia x 14' str side.
Select		4618	EVAPORATOR	WIPED/THIN	36	36 sq ft Kontro 316SS vert "Thermalizer". 24" dia x 72" str side. Mdl 36-6-4, SN 6049, NB #231. Has (2) jkt thermal sections: btm section has 12" CS jkt; 2nd section has 12" plate coil. Designed for 35 psig and full vac int, 100 psi @ 300 deg F jkt. V-belt drive, no motor. Openings: 1 1/2" inlet, 3" product outlet. Mech seal on shaft.
Select		7832	EVAPORATOR	CRYSTALLIZER/EVAPORATOR	3	65 gallon Pfaudler glass lined jacketed tank/crystallizing dish. 32" diameter x 18" straight side, dished bottom. SN E170-1138, National Board #29338. Jacketed rated for 75 psi @ 350 deg F. Glass #3315. No bottom outlet. Mounted on legs with caster wheels.
Select		8204	EVAPORATOR	WIPED/THIN	173	173 sq ft Luwa 316LSS thin film evaporator. W/20 HP volt belt motor drive, UL label. Mdl NL4-850/6300/18 SPEC, SN #16173, full vac int, 150 psi jkt, equipped w/special lower bearing support arrangement and enlarged outlet 60" dia attached to approx 1,000 gal 316LSS jkt receiver w/inverted 15 HP Phila anchor agit drive, PTEM-16, full vac int, 200 psig jkt. Gear ratio 87.5:1. Double mech seal. Internally mtd detraining baffles, rotor has 1" clearance.
Select		8865	EVAPORATOR	CRYSTALLIZER/EVAPORATOR	30X04	30" dia x 46" str side glass lined evaporator/crystallizer. Pfaudler Mfg #E271-1559, NB #30678. Int pressure 14.5 psi @ 350 deg F. Dish top (clamp-on) and btm. Openings: top 1-10"; side 1-10"; btm 1-2". 150 gal capacity.
Select		8878	EVAPORATOR	CRYSTALLIZER/EVAPORATOR	2403	24" dia x 40" str side glass lined evaporator/crystallizer. Pfaudler #E68092, L660-0560 RPRD. Glasteel #59. Dish top (clamp on) and btm. Openings: top 1-8"; side 1-7"; btm 1-2". 75 gal capacity.
Select		9421	EVAPORATOR	CRYSTALLIZER/EVAPORATOR	4	Pfaudler vac pan evaporator/crystallizer. 48" dia x 4" str side. 60 gal capacity. Mfr #E41482. Int rated 14.5 psi @ 350 deg F, jkt rated 75 psi @ 350 deg F. Openings: btm 1-2". Mounts on (3) socket for pipe legs.
Select		9771	EVAPORATOR	CRYSTALLIZER/EVAPORATOR	4	130 gal glass lined open top tank/crystallizer. 40" dia x 24" str side, dish btm, 46" OD top flange. 1-2" btm outlet. W/poylpropylene hinged lid w/CS bracket for clamp-on mixer (not included). On legs w/wheels.
Select		10543	EVAPORATOR	CRYSTALLIZER/EVAPORATOR	4	Approx 170 gal working capacity, glass lined open top tank/crystallizing dish. 48" dia x 30" str side, 52" OD flange. No jkt. No btm outlet. No legs.
Select		13446	EVAPORATOR	WIPED/THIN	1	1 sq. ft. Rodney Hunt 316 SS vertical wiped film evaporator system. SN O-128-E. SS jacket rated 250 psi, internal rated 15 psi. Evaporator chamber measures 3 1/2" diameter x 16" straight side, with 5 1/2" x 10" vapor section. Mounted on stand with a 6" x 26" condensor, 4" x 24" condensor and Nash H3 vacuum pump. Driven by 5 HP, 3/60/220/440 volt motor.
Select		18493	EVAPORATOR	WIPED/THIN	108	107.6 sq ft (10 sq m), Pfaudler glass lined wiped film evaporator. Mfd by Balfour/Sybron, SN 1, Order #48621, NB #27. Lined w/glass #3115. Rated full vac int @ 392 deg F; CS jkt 98 psi @ 392 deg F. ASME Code constructed. Has glass covered int rotor w/graphite wipers. Retaining pins and rotor shaft are titanium. Has 3-sections: clamped dish entrainment section, 48" dia x 42" str side; jkt body section, 48" dia x 9'10" str side; and clamp jkt cone btm. Drive is Pfaudler Type VS80-U21983, belt driven by approx 10 HP motor w/mech seal on shaft. Openings: top section 4-4", 1-20" vapor outlet; 6" on cone btm.
Select		19581	EVAPORATOR	WIPED/THIN	173	173 sq ft Luwa thin film evaporator. 316LSS wetted parts w/titanium stabilized shell. Mdl L850/6300/HT, SN 16116. (4) section jkt rated 75 psi @ 650 deg F. Special "K" type rotor w/06 clearance off wall. 33 5/8" dia x 26'4" long. Spider ring, dual action separator. Double mech seals. Conical btm discharge w/Warren screw pump on discharge, Mdl 3FSXH, jkt, driven by 7.5 HP DC drive, 2 to 10 gpm. Openings on evaporator include 20" vapor outlet, and 2" jkt connections. Rotor driven by 60 HP US varidrive with 3/60/460 volt TEFC motor, and Falk reducer. 150 to 615 rpm output. Side lug mtd. 36 1/4" dia x 29' overall height.
Select		20067	EVAPORATOR	WIPED/THIN	34	****34.4 sq ft Luwa vert wiped film evaporator. Material 316SS/TI (1.4571). Shell 22" dia x 87" long, entrainment separator 24" dia x 40" long. Expansion joint on shell. Mdl L-425. Jkt rated 25 ATM @ 230 deg C. Internal rated full vac @ 230 deg C. Rotor rebuilt and unused since rebuilding. SN 4048. Jkt 25 ATV @ 250 deg C. Vapor nozzle 16" dia. 3" btm discharge.
Select		21972	EVAPORATOR	CRYSTALLIZER/EVAPORATOR	3	40" dia x 24" str side, Pfaudler glass lined jkt crystallizing dish. Open top, dish btm. 130 gal. SN E174-1924, NB #34355. No btm outlet. Has bracket mtd on side for portable type agit. Mtd on legs w/casters. Lined w/glass #3315.
Select		23736	EVAPORATOR	WIPED/THIN	4	4 sq ft (.4M2) Canzler wiped film evaporator, 316 SS/TI (1.4571). SN 12952. Jkt rated 26 ATU @ 200 deg C, int rated full vac @ 200 deg C. Shell 12" dia x 42" long, bolted in (2) sections. Jkt 316 SS, 16" dia x 21" long. Driven by 0.45KW, 3/50/220/380 volt, 1420 rpm XP motor, direct coupled to varidrive gear reducer, mfd by Prym, 457-93.4 rpm output. Mech seal on shaft. (4) lugs for mounting.
Select		28985	EVAPORATOR	WIPED/THIN	40	****40 sq ft vert SS wiped film evaporator system. 2' dia x 4' str side w/bolted 18" cone btm. CS jkt. Set up for 7 1/2 HP motor (no motor w/unit). 30" dia x 4' high SS pot welded to top w/flat bolted cover. System includes approx 500 sq ft vert condenser, rated full vac on SS and 60 psi tube side, multi-pass. 4" outlet center btm. Condenser mfd by Pemco, SN 131.
Select		31274	EVAPORATOR	WIPED/THIN	54	****5 sq meter, 321SS (1.4541) wiped film evaporator. 570 MM x 3946 MM plus 600 MM conical section. Manufactured by SMS Germany, Mdl B450/1007, SN A-13-637. Jacket rated 15 ATU @ 250 deg C, internal rated vacuum @ 250 deg C. Repaired 1970. Entrainment separator and conical bottom have 316SS dimple jacket. 316SS jacket on straight side is made in 4-sections. (4) rigid rotor blade inside. Also included spare rotor w/flexible wiper blades. Motor not included. Openings: entrainment section 1-400mm , 1-300mm ; shell 2-75 mm, 11-50mm ; 150 mm center bottom outlet.
Select		31726	EVAPORATOR	WIPED/THIN	50	50 sq ft Blaw Knox 304LSS thin film evaporator system. Roto-Vak Mdl. Mfd by Buflovak, SN 15216. Rated 15 psi and full vac int @ 400 deg F, 165 psi @ 400 deg F jkt. ASME code constructed, NB stamped. Sanitary construction. Rotor underdriven by 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor speed. Unit has external upper & lower bearings, mech seals on shaft. Unit has 3" feed port and 10" x 24" discharge into centrifugal vapor/liquid separator. Separator is 304SS, 40" dia x 68" str side w/welded dished top, 36" deep cone btm. Openings in the separator: top 1-8"; side 1-18" w/cover & sight glass, 10" x 24" tangential; btm 1-3" discharge. W/system is 565 sq ft, 304LSS shell side, CS head, horiz condenser with 3/4" OD x 18 bwg, 304LSS tubes, 143" long. 6 pass tube side. 18" dia 304ELC SS shell 161" overall length. CS channels. Unit designed for 30 psi & full vac @ 400 deg F shell side; 100 psig @ 400 deg F tube side. Openings: shell 1-10", 1-3"; channels 2-4" one head, (2) 3/4" other head. Mfd by Patterson Kelly. Also w/unit is an 81 sq ft aftercondenser. Mfd by Graham, 304SS shell side, CS tube side. Unit rated 50 psig/full vac @ 150 deg F shell side; 75 psig @ 150 deg F tube side. Asme code constructed. 8" dia shell, 8' long tubes, 9'11" overall length. The feed pumps are Moyno rotary pumps: (1) Type SSQ, Frame 2L, 3" x 2", driven by 1 1/2 HP Reeves varidrive 3/60/220/440 volt; the other is Mdl 1L3, Type SSQ, driven by 3/4 HP motor 3/60/220/440 volt, 1725 rpm. Feed tanks are vert 6' dia x 5'6" str side, flat top & btm, 1100 gal 304SS, w/1-18" top opening; 2-2", 2-1" side; 2" btm outlet. Addl equipment in the system includes 10" dia x 20' high 304SS column; 22" dia x 46" str side, weld dish top & btm tank and 4 gpm x 75' TDH, 1 x 1.5 Goulds SS pump. 1/2 HP, 3/60/220/440 volt mtr. System originally designed for 18-22% weight emulsified polymer feed, 1380 lbs of water evaporation per hour.
Select		31727	EVAPORATOR	WIPED/THIN	50	50 sq ft Blaw Knox 304LSS thin film evaporator system. Roto-Vak Mdl. Mfd by Buflovak, SN 15216. Rated 15 psi and full vac int @ 400 deg F, 165 psi @ 400 deg F jkt. ASME code constructed, NB stamped. Sanitary construction. Rotor underdriven by a 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor speed. Unit has external upper & lower bearings, mech seals on shaft. Unit has 3" feed port and a 10" x 24" discharge into a centrifugal vapor/liquid separator. Separator is 304SS, 40" dia x 68" str side w/welded dished top, 36" deep cone btm. Openings in the separator: top 1-8"; side 1-18" w/cover & sight glass, 10" x 24" tangential; btm 1-3" discharge. W/system is 565 sq ft, 304LSS shell side, CS head, horiz condenser with 3/4" OD x 18 bwg. 304LSS tubes, 143" long. 6 pass tube side. 18" dia 304ELC SS shell 161" overall length. CS channels. Unit designed for 30 psi & full vac @ 400 deg F shell side; 100 psig @ 400 deg F tube side. Openings: shell 1-10", 1-3"; channels 2-4" one head, 2-3/4" other head. Mfd by Patterson Kelly. Also w/unit is an 81 sq ft aftercondenser. Mfd by Graham, 304SS shell side, CS tube side. Unit rated 50 psig/full vac @ 150 deg F shell side, 75 psig @ 150 deg F tube side. ASME code constructed. 8" dia shell, 8' long tubes, 9'11" overall length. The feed pumps are Moyno rotary pumps: (1) Type SSQ, Frame 2L, 3" x 2", driven by 1 1/2 HP Reeves varidrive 3/60/220/440 volt. The other is Mdl 1L3, Type SSQ, driven by 3/4 HP motor 3/60/220/440 volt, 1725 rpm. Addl equipment in the system includes 10" dia x 20' high 304SS column: 22" dia x 46" str side, weld dish top and btm tank and 4 gpm x 75' TDH, 1x1.5 Goulds SS pump, 1/2 HP, 3/60/220/440 volt motor. System originally designed for 18-22% emulsified polymer feed, 1380 lbs of water evaporation per hour.
Select		32809	EVAPORATOR	WIPED/THIN	214	****214 sq ft Hitachi Ltd CS dual wiped film evaporator system. CRN #4972-6, 4972-7. Jkt rated 660 psi @ 572 deg F, int rated 28 psi @ 572 deg F. Unit has (2) separate 107 sq ft evaporators. Shell .984" thick, jkt .630" thick, head 2.047" thick. SN 8032994, 8032995. Each unit has top mtd 100 HP motor and drive. Gearbox mfd by Ichikawa Mach Ind, 17.53 ratio, 1150 rpm input, 65 rpm final rotor speed, belt driven by 100 HP, 3/60/575 volt, 1180 rpm motor. Mech seal on shaft. Each evaporator overall dimensions are 40" OD x 23' str side plus 7' for drive. Evaporator has cone btm w/5 HP rotary valve on discharge. W/each evaporator is shell and tube condenser rated 660 psi @ 572 deg F shell side, 430 psi @ 572 deg F tube side. Mfd by Hitachi, SN 8032997. 26" dia CS shell, 18' overall length. System has evaporation cpacity of approx 11,000 lbs/hr solvent. Designed for continuous operation.
136 Items Returned Go To Page: 1 2 3 4 5 6 7