 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Featured Equipment
|
 |
|
|
|
46768
Model 1P3018JCC porcupine processor. 316 & 304SS. Manufactured by Bethlehem Corp. Serial Number 35-1112-2, National Board number 484, Rated 4 psi @ 750 degrees F in the shell, 85 psi @ 750 degrees F in the CS Jacket; 150 psi @ 750 degrees in the shaft. Cylindrical trough is 30" diameter and 18' long. Continuous design. Agitator material of construction is 316L SS and trough is 304SS. Heating medium is hot oil. Mounted on a 1 degree pitch. 348 Sq Ft total heat transfer area. Unit has Torrington Bearings, Packing glands on shaft, designed for a chain and sprocket drive, No motor or gear reducer with unit. Originally used to dry Polyester chips,at 6000 lb/hr 47 lb/cu foot chip capacity.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
IPPE Used Process Equipment Search
Enter a product number or part of its description below and click SEARCH
Now choose a product sub group (if any are present below)
| 32 Items Returned | Go To Page: | 1 | 2 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 71999 | EXTRUDER | | 4 | 3.94" (100mm) Baker Perkins PC100 poly-con continuous reactor twin screw extruder. Machine #56706, Order #WO4279, Contract #M90774. Barrel 9:1 L/D ratio w/3" dia discharge. Feed to poly-con is by 3/4" NPT inlet. Internals 304SS, rated 125 psi @ 600 deg F. Unit has 4" dia opening vent vac port presently capped. Horsburgh and Scott helical reducer, Size 80-S, ratio 4.33:1, HP rating 122, service factor 1.5. Unit driven by WER 100 HP DC motor, 1750 rpm, Type TR, 500 volt armature, 300 volt field less tachometer and DC-SCR drive controller. Electricals: 460 volt, 3 phase, 60 Hz. |
|
|
| 75783 | EXTRUDER | | 8 | 8', 24:1 CS Extruder barrel. *" ID x 15' long, with 23" OD x 5.25" thick flanges on both ends. (12) bolt holes on flanged ends, 18.75" bolt centers. |
|
|
| 78337 | EXTRUDER | | 1 | 1.5"-21:1L/D Sterling extruder. SN 15407. Having 3-zone electrically heated water cooled non-vented Xaloy 306 lined barrel. Barrel water cooling system utilizes cast aluminum heaters in a closed loop system including reservoir, pump and heat exchanger. Extruder barrel has (3) int pressure readout devices installed and discharge end terminates w/split clamp assembly. Extruder feed section is jkt w/round on center feed opening and has int flow surfaces nickel plated. Extruder driven by 15 HP DC motor connected to reducer via belts and pulleys for an approx max screw speed of 100 rpm. Extruder presently caster mtd for mobility at a56" centerline height. Temp control panel is free standing and has Eurotherm EM-1 control system for (3) barrel, (1) gate and (3) accessory zones. Extruder supplied w/total of (2) Duranickel fabricated screws. Electricals: 3/60/230 volt. |
|
|
| 78947 | EXTRUDER | | 1 | 1 1/2" diameter Baker Perkins 316SS twin screw extruder. SN 63214/1. 19" long screw. Top feed 1 1/2", side feed 1". Extruder housing electrically heated. Reeves drive, Size 442, Ident #30311717-XD, Assembly 105, gear ratio 9.3:1, output speed 230 rpm max, 57.5 rpm min. Belt driven by 15 HP, 3/60/230/460 volt, 1765 rpm motor, UL label. Mounted on CS base 68" long x 46" wide x 36" high. |
|
|
| 79865 | EXTRUDER | | 8 | 8" dia x 24'9" long CS screw for extruder. 8" pitch. Shaft 8" dia x 14" long with 1 1/2" wide x 10" long keyway. |
|
|
| 82274 | EXTRUDER | | 12 | 12" Bonnet SS #12 duplex vac plodder/extruder. Each equipped w/(2) 25 HP variable speed drives. Presently extrude (2) ropes at a time. Complete soap bar extruding, cutting and pressing line. Consisting of Bonnet SS #12 duplex 12" vac plodders. Each equipped w/(2) 25 HP variable speed drives. Presently extrude (2) ropes at a time. Mazzoni air operated continuous soap bar cutters. Jones Mdl "F" soap presses w/infeed conveyors and Twin Line discharge conveyors. |
|
|
| 83293 | EXTRUDER | | 1 | 1 1/2" Baker Perkins 316SS twin screw extruder. SN 63214/2. 19" long screw. Top feed 1 1/2", side feed 1". Extruder housing electrically heated. Reeves drive, Size 442, Ident #30311717-XD, Assembly 105, gear ratio 9.3:1, output speed 230 rpm max, 57.5 rpm min. Belt driven by 15 HP, 3/60/230/460 volt, 1765 rpm motor, UL label. Mtd on CS base 68" long x 46" wide x 36" high. |
|
|
| 85782 | EXTRUDER | | 1 3/4 | 1.75" x 36" steam heated extruder. Mfd by Welex, SN 0753, Mdl 17518:1-COX. 1 1/2" inlet, water cooled, 2-zone steam heated. Drive 20 HP, DC volt, 500 volt arm. 300 volt field motor, max 1750 rpm thru Lufkin gear reducer, 9.91:1 ratio, 175 rpm output speed. Power 3/60/460 volt. Mtd in frame 5' wide x 6' high x 3' deep. |
|
|
| 97106 | EXTRUDER | | | Desma shoe press consisting of an extruder Mdl ELA43-418. W/electrically heated non-cooled 3-zone barrel. Extruder powered by 7 1/2 KW, AC motor, 230/380 volt, 1140 rpm. Press is 2-station rotary type #701/2/252, w/control panel. |
|
|
| 100412 | EXTRUDER | | | Extruder die head. (90) 6mm dia holes. Mfd by Automatik Grossostheim, SN 906/C-17711. Jkt rated 143 psi @ 660 deg F (10 bar @ 350 deg C); int rated 300 psi @ 660 deg F (21 bar @ 350 deg C). Requires 4.2 gal (16 liters) Dowtherm. Unit w/pneumatic valve. |
|
|
| 100413 | EXTRUDER | | | Extruder die head. (90) 6mm dia holes. Mfd by Automatik Grossostheim, SN 905/C-17711. Jkt rated 143 psi @ 660 deg F (10 bar @ 350 deg C); int rated 300 psi @ 660 deg F (21 bar @ 350 deg C). Requires 4.2 gal (16 liters) Dowtherm. Unit w/pneumatic valve. |
|
|
| 100414 | EXTRUDER | | | Extruder die head. (90) 6mm dia holes. Mfd by Automatik Grossostheim, SN 903/C-17711. Jkt rated 143 psi @ 660 deg F (10 bar @ 350 deg C); int rated 300 psi @ 660 deg F (21 bar @ 350 deg C). Requires 4.2 gal (16 liters) Dowtherm. Unit w/pneumatic valve. |
|
|
| 100415 | EXTRUDER | | | Extruder die head. (90) 6mm dia holes. Mfd by Automatik Grossostheim, SN 904/C-17711. Jkt rated 143 psi @ 660 deg F (10 bar @ 350 deg C); int rated 300 psi @ 660 deg F (21 bar @ 350 deg C). Requires 4.2 gal (16 liters) Dowtherm. Unit w/pneumatic valve. |
|
|
| 104127 | EXTRUDER | | | UNUSED Betol extrusion/film line. Consisting of (1) Betol Mdl 4024 extruder. 40mm dia screw, L/D ratio 24:1. (6) independent heating zones, (4) 12 KW for barrel, (2) 1.5 KW for die. Driven by 11.25 KW DC motor, 1500 rpm, thru gearbox, output rpm 5-100, w/screw speed indicator and ammeter. Electrical supply 3 phase, 50 cycle, 380/440 volt. Screw and barrel made of high grade corrosion resistant steel alloy. (1) Betol Mdl 0250 film tower. Production capacity max 450mm lay flat. Electrical supply 3 phase, 50 cycle, 380 volt, 2.3 KW. (2) Nip rolls: (1) chrome plated and (1) rubber. Nip rolls driven by .75 KW DC motor, 180 volt arm, 200 volt field, 1500 rpm, w/geabox, output 0-50 rpm. Coiler Reel - core is 76mm inside dia cardboard core, reel size from core to max of 480mm dia. Coiler Reel driven by .37 KW DC motor, 180 volt arm, 200 volt field, 1500 rpm. Air supply 4.2 - 5.6 Kg/sq cm. |
|
|
| 108145 | EXTRUDER | | | Velati all 304SS meat mixer/grinder. Designed with pre-mix hopper (36" x 80" x 20") containing (2) mixing paddle shafts, each individually driven by electric motor drives. Grinder driven by approx 125 HP electric motor (40 HP suitable for standard meat grinding). |
|
|
| 201972 | EXTRUDER | | 3 | Instamelt rotary extrusion system. Approx. 8" diameter x 16" long melt chamber, electrically heated. With 12" long x 2" wide feed chute, 1.5" diameter jacketed outlet. Rotor is driven by a 150 HP 500 Volt DC motor through a Falk gear reducer. Skid mounted with an electrically heated gear pump for pumping hot melt, driven by a 30HP 500 volt, DC motor through a Falk gear reducer 9.187:1 ratio. System includes a GraviMerrick belt feeder. |
|
|
| 201973 | EXTRUDER | | 3 | 3.5" diameter NRM Corp. Pacemaker 70 extruder. L/D 28:1. Ratio- 3.91:1. Serial number 15875, Driven by 200 HP Reliance 500V air cooled, DC motor, through a double reduction gear box, Order 103850. Electircally heated chamber, non-vented type, with external cooling fans. With a Young Size 1, jacketed ribbon feeder, 12" wide x 18" long trough, with single ribbon, 2" discharge, and an air acutuated heated hot melt valve. |
|
|
| 210304 | EXTRUDER | | 2 | 58 MM, Werner Pfliederer ZSK58 F96, twin screw extruder. Electric heated barrel with water cooled jacket, 84” long (Consisting of 9 blocks each 9.45"), 2.2” diameter discharge. Rated for 96 Kpm torque per shaft or 960Nm, Outer screw diameter is 57.8 mm. Flight depth is 10,3mm. Maximum torque on nscrew shafts is 1920Nm. L/D ratio is 36.9:1.
With a WP gear reducer, 1750 rpm input ot 513 rpm output. Driven by a 150 HP 500 volt DC motor 1750 prm. Unit is base mounted. With control panel and cooling water circulating skid. |
|
|
| 210323 | EXTRUDER | | 3 | 83 MM, Werner Pfliederer ZSK83 twin screw extruder. Electric heated barrel with water cooled jacket, 66” long, 3” diameter discharge. with a WP gear reducer, 1750 rpm input ot 513 rpm output. Driven by a 150 HP 500 volt DC motor 1750 prm. Unit is base mounted. With control panel and cooling water circulating skid. |
|
|
| 212989 | EXTRUDER | | 10 | 250 mm Werner Pfleiderer twin scew extruder, Model ZSK-250, Reference number 614248, Type BD108/205-R70; 5,345/8,00 ratio. Manufactured by Werner & Pfleiderer (Coperian), with a Renke-Tack Gearbox, GE Main Drive Motor, GE Gearbox Auxillary Drive, Extruder Exhaust Vent Fan, and SWZ 1900 screen changer. Component details; 1185 Speed Input; 221/148 speed output; 1.5 service factor; Right Barrel ID 9.886 at 6inches from feed end; Left Barrel ID 9.886 inches at 6 inches from feed end. Main Drive motor is a General Electric 5000 HP motor, 1185 RPM, 626 AMP, 4160 Volts, 3 phase, 60 Hertz, 0.86 power factor, Frame 8613S. Control Panel with unit. |
| 32 Items Returned | Go To Page: | 1 | 2 |
|
|
|
|
|
IPP Sales Contacts
|
|
|
|
Keith West
Global Sales
Email Keith
Direct: 1-609-838-5931
Office: 1-609-586-8004 |
Amanda Vagell
Global Sales
Email Amanda
Direct: 1-609-838-5929
Office: 1-609-586-8004 |
Patti Buchman
Global Sales
Email Patti
Direct: 1-609-838-5928
Office: 1-609-586-8004 |
Ray Wagner
Global Sales
Email Ray
Direct: 1-609-838-6043
Office: 1-609-586-8004 |
|
Central Europe
Sales & Acquisitions
Regina Zarmer
Email Regina
Office: 49-306-594-2445
Mobile: 49-172-313-8439
Fax: 49-30-6594-2448 |
UK, Scandinavia, Spain & South Africa Sales & Acquisitions
Office: 44 (0)1642-367-910
Fax: 44 (0)1642-367-920
Jo Petrie
Email Jo
Direct: 44 (0)1642-367-913 Mobile: 44 (0)7770-748-884
Nicola Douglas
Email Nicola
Mobile: 44 7940 981 681 |
Eastern Europe
Sales & Acquisitions
Bohumil Cuta
Email Bohumil
Office: 42-054-821-6680
Mobile: 42-060-273-7517
Fax: 42-054-812-2240 |
Central & South America Sales
Elisa Lucumi
Email Elisa
Direct: 1-609-838-5927
Office: 1-609-586-8004
|
|
|
|
|
|
|
|