Quote Contents:

Top Equipment Categories

Contact IPP

Call USA:+1 (609) 586-8004
UK: +44-1642-367910

LET US FIND THE RIGHT EQUIPMENT FOR YOU!  Click here to learn more

47 diameter inch skb briquetter chilsonator
( 1200 diameter mm skb briquetter chilsonator )

IPPE Stock Number: 706483

Equipment Category BRIQUETTER CHILSONATOR
Capacity 47 DIAMETER INCH / 1200 DIAMETER MM
Product Description RECONDITIONED, Approximately 25 - 30 tonnes of material per hour (dependant on density) cast steel Briquetter, Manufactured by SKB (Shuctermann & Kremer-Baum Germany), very similar in design to Sahut Conreur and Komerak Greaves, Roller size: 1.2m diameter, 925 Ovoid type briquettes per revolution, briquette size approximately 45mm diameter x 35-40mm thick, Twin hydraulic rams, 80 tonnes a piece (2500 psi), each side gives a separating force of 320 tonnes. 75 hp English electric main drive motor, with a fluid coupling to a two speed W.G.W inline gearbox. Two speed 8.5 or 11 Rpm (at the rolls) Machine has undergone a full refurbishment and is in full working order: As part of the refurbishment the following was done: Gearbox rebuilt and gears refaced where necessary Reconditioned fluid coupling Reconditioned main drive motor and feeder unit motor New Gearbox oil circulation pump Fresh oil in gearbox and transfer box All new hydraulic lines and couplings All four rams are refurbished New safety valves and couplings fitted to the hydraulic power pack Main Bearings disassembled, checked and re-greased (all OK), new lube points/grease nipples installed Main roll surfaces polished and checked Feeder unit was stripped and checked, feed control gates greased. Reconditioned feeder unit motor Fully blasted undercoated and painted Custom made stand as shown Also a custom made out feed hopper to attach to the stand and machine.


Used Briquetters and Used Chilsonators

Used Briquetters and Used ChilsonatorsBriquetters and Chilsonators are roll presses that compact raw material. The material is compacted as it is carried into the gap between two rolls which are rotating at equal speeds. The size and shape of the agglomerates are determined by the geometry of the roll surfaces.

Pockets or indentations in the roll surfaces form briquettes the shape of squares, eggs, pillows, teardrops, or similar forms, weighing from a few grams up to 2 kg or more in weight.

Smooth or corrugated rolls produce a solid sheet which can be granulated into the desired particle size on conventional grinding equipment.

Briquetters and Chilsonators can produce large quantities of material at low cost, but the product is less uniform than that from molding or tableting presses. To get the proper quantity of material into each of the rapidly rotating pockets in the rolls, various types of feeders are used.

GET IN TOUCH

Call us at (609) 586-8004 or CONTACT US