Quote Contents:

Top Equipment Categories

Contact IPP

Call USA:+1 (609) 586-8004
UK: +44-1642-367910

LET US FIND THE RIGHT EQUIPMENT FOR YOU!  Click here to learn more

3 kw teledyne gas generator
( 3 kw teledyne gas generator )

IPPE Stock Number: 220623

Equipment Category GENERATOR
Sub Group GAS
Capacity 3 KW / 3 KW
Product Description 3.2 Kw, Ultrapure Oxygen purification system, manufactured by Teledyne. Titan HM generator series. Model # HMO2PC1D2, serial # 0-005, part # M10009-009. Designed to work with Titan HM generator, IPP stock # 220622, the purification system provides for Ultrapure Oxygen 99.999% free of hydrocarbons and other atmospheric contaminates. The unit has the following specifications: Rated gas flow 50 SLM, Rated gas pressure: 70 psi. Power input voltage, 120 VAC, Power max., 4 KVA. 50/60 Hz, single phase. Approximate dimensions are : 37" wide x 43" deep x 68" high, Weight, 185 lbs.


Surplus/Used Power Generators – Electric, Diesel, Gas, Steam

Used power GeneratorsIndustrial power generators turn energy from burning fuels or captured waste heat into electric power. Industrial generators fall into 4 major categories classified by the fuel that drives the generator.

There are Diesel Generators, Electric Generators, Steam Turbine Generators, and Gas Generators.

Generator Sets include the “prime mover” or engine, the generator, reduction gear, and exciter. For many of the generator sets that are powered by an internal combustion engine (gas turbine, diesel, etc), the set usually includes all of the components needed to produce electricity on one skid.

Power plants are complete plants for the production of electricity. Power plants usually contain steam boilers, generator sets, transformers, and auxiliary equipment.

Here are common terms used in describing steam turbine generators:

  • Prime Mover – the engine or turbine that moves the generator
  • Condensing – a steam turbine that exhausts directly into a condenser at below atmospheric pressure
  • Back Pressure – a steam turbine that exhausts into a process steam header at positive pressure – also called non-condensing or counter pressure.
  • Extraction – steam bled off of a steam turbine before the exhaust. This steam is used for process application or for steam cycle efficiency. Can be “controlled” or “uncontrolled”. Also called bleed.
  • Controlled – In extraction, this indicates that the turbine includes valves and regulators to control the pressure of the extraction flow over the rated flow range.
  • Load Gear – this is the reduction gear between the prime mover and generator

GET IN TOUCH

Call us at (609) 586-8004 or CONTACT US