Quote Contents:

Top Equipment Categories

Contact IPP

Call USA:+1 (609) 586-8004
UK: +44-1642-367910

LET US FIND THE RIGHT EQUIPMENT FOR YOU!  Click here to learn more

4000 kw solar caterpillar gas generator
( 4000 kw solar caterpillar gas generator )

IPPE Stock Number: 222506

Equipment Category GENERATOR
Sub Group GAS
Capacity 4000 KW / 4000 KW
Product Description 4000 kW, recuperated gas turbine generation package, manufactured by Solar (Caterpillar), serial # PG99904, Mercury 50 . SO # 2-53731. Single shaft 10 stage Axial compressor. Compression ratio: 9.9:1. Annular type combustion chamber, with eight fuel injectors. Two stage reaction turbine. Heat rate 9350 kJ/We-hr., Exhaust flow, 63700 kg/hr., Exhaust temperature 365 degrees C. Electrical end rated for the following; 460 volts AC, 3 phase, 60 Hz, 90 amps. 120 VDC, 4,160 Volts AC, 3 Phase, 60 Hz, 4,000 Kw. Skid mounted in a weather proof enclosure.


Surplus/Used Power Generators – Electric, Diesel, Gas, Steam

Used power GeneratorsIndustrial power generators turn energy from burning fuels or captured waste heat into electric power. Industrial generators fall into 4 major categories classified by the fuel that drives the generator.

There are Diesel Generators, Electric Generators, Steam Turbine Generators, and Gas Generators.

Generator Sets include the “prime mover” or engine, the generator, reduction gear, and exciter. For many of the generator sets that are powered by an internal combustion engine (gas turbine, diesel, etc), the set usually includes all of the components needed to produce electricity on one skid.

Power plants are complete plants for the production of electricity. Power plants usually contain steam boilers, generator sets, transformers, and auxiliary equipment.

Here are common terms used in describing steam turbine generators:

  • Prime Mover – the engine or turbine that moves the generator
  • Condensing – a steam turbine that exhausts directly into a condenser at below atmospheric pressure
  • Back Pressure – a steam turbine that exhausts into a process steam header at positive pressure – also called non-condensing or counter pressure.
  • Extraction – steam bled off of a steam turbine before the exhaust. This steam is used for process application or for steam cycle efficiency. Can be “controlled” or “uncontrolled”. Also called bleed.
  • Controlled – In extraction, this indicates that the turbine includes valves and regulators to control the pressure of the extraction flow over the rated flow range.
  • Load Gear – this is the reduction gear between the prime mover and generator

GET IN TOUCH

Call us at (609) 586-8004 or CONTACT US