Quote Contents:

Top Equipment Categories

Contact IPP

Call USA:+1 (609) 586-8004
UK: +44-1642-367910

LET US FIND THE RIGHT EQUIPMENT FOR YOU!  Click here to learn more

200 kw kirsch gmbh diesel generator
( 266 hp kirsch gmbh diesel generator )

IPPE Stock Number: 225410

Equipment Category GENERATOR
Sub Group DIESEL
Capacity 200 KW / 266 HP
Product Description 200kw (250 kVA) diesel engine driven generator set, manufactured by Kirsch Gmbh, type D250-41WE, serial #4032, 0.8 rated power factor, 50 Hz, 400 volt, alternator manufactured by Leroy Somer, type LSA-46L9S, serial #47593/02, 200kw (250 kVA) continuous duty, 50Hz, 400 volt, 3 phase, 1500 rpm, insulation class H, 27 volt excitation continuous duty, IP 23, regulator RS129, diesel engine manufactured by Iveco Aifo, 221kw, type 8210SR125, serial #238916, 1500 rpm, Holset type 4LGK turbo, water cooled, all mounted on a carbon steel skid, set with (1) Martin Adam air filter which attached to the cooling radiator, type C1, auftrags #14960.1-21507, Komm #89/6090, (1) 1000 liter horizontal diesel fuel tank which is mounted inside a bunded tank, 960mm diameter x 1.5m straight side, level glass on one end, (1) control panel, (1) start up battery bank with 4-type 6V-OGlibloc.130 batteries, 6 volt, 152/130 Ah (5h),


Surplus/Used Power Generators – Electric, Diesel, Gas, Steam

Used power GeneratorsIndustrial power generators turn energy from burning fuels or captured waste heat into electric power. Industrial generators fall into 4 major categories classified by the fuel that drives the generator.

There are Diesel Generators, Electric Generators, Steam Turbine Generators, and Gas Generators.

Generator Sets include the “prime mover” or engine, the generator, reduction gear, and exciter. For many of the generator sets that are powered by an internal combustion engine (gas turbine, diesel, etc), the set usually includes all of the components needed to produce electricity on one skid.

Power plants are complete plants for the production of electricity. Power plants usually contain steam boilers, generator sets, transformers, and auxiliary equipment.

Here are common terms used in describing steam turbine generators:

  • Prime Mover – the engine or turbine that moves the generator
  • Condensing – a steam turbine that exhausts directly into a condenser at below atmospheric pressure
  • Back Pressure – a steam turbine that exhausts into a process steam header at positive pressure – also called non-condensing or counter pressure.
  • Extraction – steam bled off of a steam turbine before the exhaust. This steam is used for process application or for steam cycle efficiency. Can be “controlled” or “uncontrolled”. Also called bleed.
  • Controlled – In extraction, this indicates that the turbine includes valves and regulators to control the pressure of the extraction flow over the rated flow range.
  • Load Gear – this is the reduction gear between the prime mover and generator

GET IN TOUCH

Call us at (609) 586-8004 or CONTACT US