Quote Contents:

Top Equipment Categories

Contact IPP

Call USA:+1 (609) 586-8004
UK: +44-1642-367910
DEU: +49-30-65-942445

LET US FIND THE RIGHT FIT FOR YOU!

  • Do you know that each of our sales staff has an average of over 25 years of process / chemical plant equipment experience? 

  • We have a significant amount of inventory online—in fact we have over 15,000 pieces online. Due to the nature of our daily business of buying and selling, not all of our equipment is listed on our site.

  • If you would prefer, let us spend our time searching for the equipment that is suitable for your needs and we will send you a quote.

  • Fill out our form with specifications and as much information regarding the project, process or piece that you are interested in. We will assign your request to a salesperson right away and have them follow-up with you directly. 

Click here to open and fill out a request or continue below to search our inventory.

  #1 Select equipment group.

  #2 Filter your results: 


Execute Search

  Standard:  
  Capacity from: to:    Filter Results
  For Capacity use numbers only. The unit of measure will be derived from the item data.
  Results Sort:

  #3 Results of search:

 

IPPE Inventory Photo

hp gundlach roll mill
(  gundlach roll mill )

Stock Number: 221186    Capacity: hp /
Description: 150 HP, Single Stage 2 roll crusher, manufactured by Gundlach. Model 4080S. Serial # 4080S-2123. Roll size 24" diameter x 8' long face length. Typical reduction ratio is 4:1. Shaft is fabricated from Forged 4140 steel. Rated...

 

IPPE Inventory Photo

15 horsepower williams colloid mill
( 11 liters williams colloid mill )

Stock Number: 220809    Capacity: 15 horsepower / 11 liters
Description: 15 HP, CS, hammer mill, manufactured by Williams. Type GP mill, Serial # 16469. 16" x 24" chamber. Belt driven by a 15 Hp ac motor at 1780 rpm.

 

IPPE Inventory Photo

7 horsepower williams colloid mill
( 5 liters williams colloid mill )

Stock Number: 220802    Capacity: 7 horsepower / 5 liters
Description: 7.5 HP, 304 SS contact Parts, Hammer mill manufactured by Williams. Serial # 16468. Type GP-1512. 14" chamber. Hammers belt driven by a Siemens 7.5 HP ac motor at 1740 rpm. Inlet dimensions with O.R.C. Cover 12" x 10.75"....

 

IPPE Inventory Photo

50 horsepower reitz bepex corp. colloid mill
( 37 liters reitz bepex corp. colloid mill )

Stock Number: 220804    Capacity: 50 horsepower / 37 liters
Description: 50 HP, CS, Hammermill manufactured by Reitz. Disintegrator, model RD-18-H32. Serial # RD86003579. 18" diameter rotor with 32 hammers. Belt driven by a Siemens 30 Hp AC motor at 1775 rpm.

 

IPPE Inventory Photo

3 horsepower colloid mill
( 2 liters colloid mill )

Stock Number: 220748    Capacity: 3 horsepower / 2 liters
Description: 3 HP, 304 SS, Reitz "Disinigretor", hammer mill. Manufactured by Bepex. Model # RP-6K115, serial # RP-90003989. Blades are 12" long with a 2.5" deep product chamber. Overall dimensions are 46" x 28" x 44" high. Driven by...

 

IPPE Inventory Photo

4 horsepower kadymill mill
( 3 liters kadymill mill )

Stock Number: 220286    Capacity: 4 horsepower / 3 liters
Description: RTS 350 x 300 304 s/steel Powtec sieving mill, 350 kg/hr, serial #1537/04, rotor 350mm diameter x 300mm long, 8-blades on the rotor, driven by 3kw motor, flush volume 400-800 ltr/hr, 1649 cm2 sieve, (2) spare screens

 

IPPE Inventory Photo

hp ball mill
(  ball mill )

Stock Number: 218254    Capacity: hp /
Description: 3 HP, 304 SS, with CS heat box, Cylindrical Rod Mill, with LP gas fired heating system. 56 cu. ft. of milling volume. 1" diameter rods. Feed line input(liquid) 1.5" diameter pipe. Discharge port is 8" round with a 8.8" x...

 

IPPE Inventory Photo

hp pellet mill
(  pellet mill )

Stock Number: 218099    Capacity: hp /
Description: California type pellet mill, CS construction, designed to be belt driven. 16 sheeve belt drive. Pellet size 3/8". Pellet die approx. 18" diameter. Inlet and outlet chutes are 8" diameter (Round) Overall dimensions: 81" long...

 

IPPE Inventory Photo

0 gallons netzsch shot and sand mill ; parts only
( 0 liters netzsch shot and sand mill ; parts only)

Stock Number: 216253    Capacity: 0 gallons / 0 liters
Description: Rebuilt 70MM mechanical seal manufactured by Merkel. Part #630597U, Serial #3953, Ref. assembly #638208, Ref. dwg. # C-2121191X. Rebuilt by Netzsch May 2007.

 

IPPE Inventory Photo

0 gallons netzsch shot and sand mill ; parts only
( 0 liters netzsch shot and sand mill ; parts only)

Stock Number: 216258    Capacity: 0 gallons / 0 liters
Description: UNUSED, 20 Liter , SS, lower vari drive assembly Manufactured by Netzsch. Fits 100 system only.

 

IPPE Inventory Photo

70 gallons netzsch shot and sand mill ; parts only
( 265 liters netzsch shot and sand mill ; parts only)

Stock Number: 216259    Capacity: 70 gallons / 265 liters
Description: Rebuilt 70MM mechanical seal manufactured by Merkel. Part #630597U, Serial #N1150, Ref. assembly #638208, Ref. dwg #C-2121191X. Rebuilt by Netzsch May 2008.

 

IPPE Inventory Photo

0 gallons netzsch shot and sand mill ; parts only
( 0 liters netzsch shot and sand mill ; parts only)

Stock Number: 216254    Capacity: 0 gallons / 0 liters
Description: Rebuilt 80MM mechanical seal manufactured by Merkel. Part #630598U, Serial #N5036, Ref. assembly #630971, Ref. dwg. #C-2115381X. Rebuilt by Netzsch July 2008.

 

IPPE Inventory Photo

0 gallons netzsch shot and sand mill ; parts only
( 0 liters netzsch shot and sand mill ; parts only)

Stock Number: 216255    Capacity: 0 gallons / 0 liters
Description: Rebuilt 80MM mechanical seal manufactured by NFT. Part #630598U, Serial #5006, Ref. assembly #639183, Ref. dwg. # C-2115381X. Rebuilt by Netzsch June 2008.

 

IPPE Inventory Photo

0 gallons netzsch shot and sand mill ; parts only
( 0 liters netzsch shot and sand mill ; parts only)

Stock Number: 216252    Capacity: 0 gallons / 0 liters
Description: Rebuilt 70MM mechanical seal manufactured by Merkel. Part #630597U, Serial #N1150, Ref. assembly #638208, Ref. dwg #C-2121191X. Rebuilt by Netzsch May 2008.

 

IPPE Inventory Photo

dia(in)xlength(in) reliable roll mill
(  reliable roll mill )

Stock Number: 212899    Capacity: dia(in)xlength(in) /
Description: 3" diameter x 8" long, Chrome plated, two roll mill sized for laboratory applications. Manufactured by Reliable. Serial # 4021. With cored rolls for either heating or cooling. Low pressure steam used for roll heating (15...

 

IPPE Inventory Photo

7 horsepower hosokowa alpine colloid mill
( 5 liters hosokowa alpine colloid mill )

Stock Number: 212900    Capacity: 7 horsepower / 5 liters
Description: 7.5 Hp, 304 SS, Mikro Pulverizer hammer mill. Manufactured by Hosokowa Alpine. Serial # 953043J1. Model # 1 SH Rated for 9600 rpm Maximum. Reliance duty master AC motor rated for 3520 rpm, drives the mill with 6 sets of...

 

IPPE Inventory Photo

1 horsepower hosokowa alpine colloid mill
( 1 liters hosokowa alpine colloid mill )

Stock Number: 212898    Capacity: 1 horsepower / 1 liters
Description: 1/3 Hp, 304 SS, Mikro Bantam hammer and screen mill. Manufactured by Hosokowa Alpine. Serial # 957071J1. Model # W. Rated for 14,000 rpm Maximum. Six forged stirrup style hammers. Lab size with a Reliance AC motor rated...

 

IPPE Inventory Photo

300 horsepower peters & smith colloid mill
( 224 liters peters & smith colloid mill )

Stock Number: 212896    Capacity: 300 horsepower / 224 liters
Description: 300 Gallon, 304 SS, attritor, with jacket, manufactured by Peters & Smith. 42" diameter x 48" straight side, Open top with welded cone bottom. Media volume is 110 gallons, Charge is 5/16" chrome plated steel (52100...

 

IPPE Inventory Photo

300 horsepower peters & smith colloid mill
( 224 liters peters & smith colloid mill )

Stock Number: 212897    Capacity: 300 horsepower / 224 liters
Description: 300 Gallon, 304 SS, attritor, with jacket, manufactured by Peters & Smith. 42" diameter x 48" straight side, Open top with welded cone bottom. Media volume is 110 gallons, Charge is 5/16" chrome plated steel (52100...

 

IPPE Inventory Photo

73 gallons frymakoruma shot and sand mill
( 276 liters frymakoruma shot and sand mill )

Stock Number: 214763    Capacity: 73 gallons / 276 liters
Description: 73 hp, 304SS contact, FrymaKoruma coBall mill, Model MS50. Serial # M17914. This production size stirrer-bead mill is designed for the finest grinding of suspensions and high viscous products down to Nano- Range. This...
  Back First | 1  2  3  4  5  6  7  | Last Next

Used Mills

Used Mills Most types of product production lines will have some type of mill or pulverizer for size reduction to make the desired particle size for dry products, wet products, or disperse solids in a slurry. The size reduction occurs either by impact, attrition, or crushing. The capacity of the pulverizer or mill depends on the type of material, and the fineness desired. Pulverizers and mills range in design features for efficient size reduction for a range of products in the chemical, mineral, pharmaceutical and food industries.

The different classifications of Mills are:

  • Ball Mills & Pebble Mills – Basically a horizontal tube with balls or stone grinding media, that grinds the material as the tube rotates. Can be batch or continuous, wet or dry grinding.
  • Colloid mills – these grind solids in slurry.
  • Kady Mills – special type of high energy dispersion mill used to grind particles in slurry.
  • Shot, Sand, and Media Mills – typically used in the dye and pigment industries, these incorporate a cylindrical chamber that is filled with small diameter shot or sand and agitated, as the product flows through the agitated chamber. The media grinds the product as it passes through.
  • Roll Mills – Can be 2, 3, 4, or 5 rolls, used to disperse pigments in ink and paint by crushing the product between the rolls.
  • Raymond Roller mills – Uses a pan and rotating rollers to crush and grind dry products in the pan. Seen in mostly mineral and coal production plants.

GET IN TOUCH

Call us at +1 609 586 8004 or CONTACT US