 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Blowers  Blowers are designed to move air, gases, or dry power products. Blowers are similar to compressors but instead of compressing the air or gas, blowers typically operate at less than 20 PSI, or 1 bar.
Main Types of Blowers The main types of blower include; centrifugal, exhaust fans, and rotary blowers. Blowers are often rated according to the flow - Cubic Feet per Minute (CFM). - Centrifugal blowers are best for high volume and high pressure applications. Centrifugal blowers operate at speeds of 3,500 RPM or higher.
- Exhaust fans are blowers designed to move air. The fan blades can be straight, forward-curved or backward curved depending on the type of application.
- Rotary blowers are positive displacement type blowers. Many times pneumatic conveying systems that move dry powders are powered by rotary blowers.
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
| 136 Items Returned | Go To Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 1821 | BLOWER | CENTRIFUGAL | 6000 | Mdl D12LR, Allis Chalmers single stage centrifugal blower/compressor. Designed for 6000 cfm at 6 psig max discharge pressure, 16" suction opening, 12" discharge. 3600 rpm operating speed. Driven by 200 HP, 460 volt, 3500 rpm motor. |
|
|
| 12229 | BLOWER | ROTARY | 0 | CS rotary lobe blower. Mfd by Schwitzer, Size 4.5x6, SN J-24-73-04NP. With 4 1/2" outlet and 6" inlet. No drive. |
|
|
| 13962 | BLOWER | ROTARY | 1370 | Approx 1,370 cfm @ 2 psi rotary blower. Mfd by Fuller/Sutorbilt. Range of blower is max 1,370 cfm @ 2 psi w/20 HP to 1,170 cfm @ 12 psi w/100 HP. Blower rated 1,450 rpm. |
|
|
| 13963 | BLOWER | ROTARY | 1370 | UNUSED 1,370 cfm @ 2 psi rotary blower. Mfd by Fuller/Sutorbilt, Mdl 812V-3000, SN 145829. Blower range is from 2 psi to 12 psi. Max capacity 1,370 cfm @ 2 psi w/20 HP, min capacity 1,170 cfm @ 12 psi w/100 HP. Blower rated 1,450 rpm. |
|
|
| 18319 | BLOWER | EXHAUST FAN | 325 | Approx 325 cfm CS Buffalo volume fan. Size 32, Shop #63P6944. Driven by 1 HP, 3/60/220/440 volt, 3600 rpm motor, UL label. |
|
|
| 20824 | BLOWER | ROTARY | 2160 | 2,160 cfm @ 5.8 psig, Roots CS horiz positive displacement blower. Mdl 12x18 RCDH, SN 19342. W/approx 75 HP, 1750 rpm motor. 12" inlet x 12" outlet. 3.546 cu ft per revolution. Max ratings: 6 psi, 1000 rpm, 3110 cfm, 101.2 BHP. 74 HP, 734 rpm gearbox. Includes gearbox and baseplate only. Base mtd. |
|
|
| 21189 | BLOWER | ROTARY | | Fuller rotary blower w/silencer. Size GM-B, SN A-145896. Mfd by Sutorbilt Comp. Design for use in pneumatic conveying. 6" inlet, 4" outlet. Belt driven by 20 HP, 3/60/230/460 volt, 1755 rpm Reliance motor. Mtd on stand. |
|
|
| 23922 | BLOWER | ROTARY | 700 | 700 cfm @ 6 psi, Roots CS rotary lobe blower. Designation 710RAI. Mfd by Roots-Dresser, SN 14987, ID #823-366-120. Belt driven by 25 HP, 3/60/220/440 volt, 1750 rpm Reliance UL tested motor. Blower outlet connected to Burgess Manning snubber. |
|
|
| 25047 | BLOWER | ROTARY | | Roots rotary lobe blower. Mfd by Dresser Ind, Mdl 74RA1, SN 825-054-20, Type R6S. Unit belt driven by 25 HP, 3/60/230/460 volt, 1740 rpm motor. |
|
|
| 26730 | BLOWER | EXHAUST FAN | 30000 | Approx 30000 cfm, 100 HP, CS blower. Mfd by ILG Industries Inc, Size LP2037, SN D605194. Max rpm 890. 5' dia impellor, 36" inlet, 24" x 24" outlet. Requires 100 HP, 1750 rpm motor. |
|
|
| 32110 | BLOWER | EXHAUST FAN | 3000 | Approx 3,000 cfm @ 3" SP, 304SS Garden City exhaust fan. Size 8, Type RF, SN 80051. 6" dia inlet, 3 3/4" x 7" outlet. Approx 12" dia impellor. Direct driven by 7.5 HP, 3/60/460 volt, 3520 rpm motor. |
|
|
| 33302 | BLOWER | EXHAUST FAN | 3000 | 3,000 cfm @ 58" SP, 30" dia Buffalo FRP exhaust fan. Size 7E, SN 75T-539. FRP housing w/30" dia 316SS fan wheel. 10" air inlet, 6" vent down outlet. Requires 50 HP motor. |
|
|
| 34614 | BLOWER | ROTARY | 1000 | 1,000 cfm @ 8.3 psi max, 500 cfm @ 8.8 psi min, Hoffman CS rotary blower. Mdl 4208A, SN 1071109. 6" inlet and outlet. Unit driven 50 HP, 3/60/230/460 volt, 3545 rpm motor. |
|
|
| 36766 | BLOWER | ROTARY | 1060 | 1,060 cfm @ 6 psi, Roots CS rotary blower. Mdl 69JVRAS, SN 7524604. Blower only, no motor. Openings: 6" x 8". |
|
|
| 37532 | BLOWER | CENTRIFUGAL | 11423 | 11,423 acfm @ 23.67 psi, Roots CS centrifugal blower. SN HM603. Type MVI-64. Inlet pressure 14.2 psi, inlet temp 100 deg F. 3560 rpm. Driven by 600 HP, 3/60/2300 volt, 3574 rpm drip-proof motor. |
|
|
| 37533 | BLOWER | ROTARY | 11423 | 11,423 acfm Roots CS rotary blower. SN HM604. Type MV1-64. Inlet pressure 14.2 psi, inlet temp 100 deg F; discharge pressure 23.67 psi, 3560 rpm. Driven by 600 HP, 3/60/2300 volt, 3574 rpm drip-proof motor. |
|
|
| 37534 | BLOWER | ROTARY | 11423 | 11,423 acfm Roots CS rotary blower. SN HM706. Type MV1-64. Inlet pressure 14.2 psi, inlet temp 100 deg F; discharge pressure 23.67 psi, 3560 rpm. Driven by 600 HP, 3/60/2300 volt, 3574 rpm drip-proof motor. |
|
|
| 39012 | BLOWER | EXHAUST FAN | | 90 HP, SS exhaust fan. Approx 36" wheel. 20" suction and discharge. Belt driven by 90 HP, 3/50/415 volt, 2950 rpm flameproof motor. |
|
|
| 39013 | BLOWER | EXHAUST FAN | 300 | Approx 300 cfm, 75 HP, 316SS exhaust fan. Mfd by Keith Blackmon, SN D09327/02. Approx 36" dia wheel. 20" suction and discharge. Belt driven by 75 HP, 3/60/415 volt, 2950 rpm flameproof motor. |
|
|
| 39278 | BLOWER | ROTARY | | 75 KW (100 HP) Holms CS rotary blower. Mdl RBST4, SN 371843. Belt driven by 75KW, 3/50/415 volt, 1700 rpm TEFC motor. Skid mtd w/muffler and filters. Rotor size 8" x 13". 1850 cfm, 10 psi. |
| 136 Items Returned | Go To Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|