 |
|
Need Help? or Have something for sale? Use this:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below...
OR
Now choose a product sub group (if any are present below)
| 9 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 73623 | BRIQUETTER/CHILSONATOR | | | ****PARTS ONLY 20" dia Komarek-Greaves CS briquetter. Mdl 20.5-9.2. Has vert screw feed driven by 7.5 HP, 3/60/220/440 volt Reeves varidrive, 350 to 38 rpm. Requires 75 HP motor and reducer for final output of 17 rpm. Rolls have holes 1 1/4" long x 3/4" wide for compressing into oval shaped briquettes. Hydraulic roll tension (missing on piston). |
|
|
| 85407 | BRIQUETTER/CHILSONATOR | | | 8" (200mm) dia x 52" (1300mm) long, horiz 316SS Gericke vac compactor. Type GVD-200, SN 20013, blt 1987. Screw dia 6" (150mm) w/4" (100mm) pitch. 6" ID x 50" long screen, 10" x 24" (260mm x 600mm) inlet, 1-8" (200mm) air operated end valve. Driven by gear motor 4.8 HP (3.7 KW), 3/50/380 volt, 1420 rpm reduced 3.5:1 ratio, 458 rpm 0utput. W/Rietschel oil seal vac pump, Type DCLF100-V-04, 60 cfm (100 cu meter/hr) of air @ 15" Hg (370mm abs). W/6.5 HP, (5 KW), 3/50/380 volt, 1440 rpm motor. |
|
|
| 85408 | BRIQUETTER/CHILSONATOR | | | 8" (200mm) dia x 52" (1300mm) long, horiz 316SS Gericke vac compactor. Type GVD-200, blt 1987. Screw dia 6" (150mm) w/4" (100mm) pitch. 6" ID x 50" long screen. 10" x 24" (260mm x 600mm) inlet, 1-8" air operated end valve. Driven by gear motor 10 HP (7.5 KW), 3/50/380 volt, 1440 rpm @ 28.7:1 ratio, 51 rpm output. W/Rietschel oil seal vac pump, Type DLC-100V, 60 cfm (100 cu meter/hr) @ 15" Hg (370mm abs), driven by 5 HP (3.7 KW), 3/50/380 volt, 1440 rpm motor. |
|
|
| 200145 | BRIQUETTER/CHILSONATOR | | | 28" (700 mm) diameter x 27" (675mm) face, twin roll briquetting press system. Manufactured by Komarek Greaves, model 28-27KG.Serial # 4345. Driven by Toshiba 150 HP type TIKK 3/60/460V ,1775 RPm motor. with Falk gear reducer model 445A3-AD, 1750 RPM input speed, 42.6 RPM output speed. Gear ratio 41.07:1.With Eaton Dynamic 6000 series frequency drive model 6200. With Honeywell model 153018-26-47-C-000-024-168 speed recorder range 0-24 scale 0-25. Rolls made of air hardened tool steel. Rolls have 14 pockets across face, 46 pockets on the circumference. Pockets are pillow design, 2" x 2" x 1" deep. Rolls separating pressure 300 tons. Equipped with hydraulic system including resistance blocks, hydraulic pump. . Forced oil piping and lubrication system. Briquetter rated 35 TPH . |
|
|
| 200146 | BRIQUETTER/CHILSONATOR | | | 28" (700 mm) diameter x 27" (675mm) face, twin roll briquetting press system. Manufactured by Komarek Greaves, model 28-27KG.Serial # 4345. Driven by Louis Allis 150 HP type TJXC 3/60/460V ,1800 RPM TEFC motor. with Falk gear reducer model 445A3-AD, 1750 RPM input speed, 42.6 RPM output speed. Gear ratio 41.07:1. Rolls made of air hardened tool steel. Rolls have 14 pockets across face, 46 pockets on the circumference. Pockets are Improved Pillow design, 2" x 2" x 1" deep. Rolls separating pressure 300 tons. Briquetter rated 35 TPH . |
|
|
| 202692 | BRIQUETTER/CHILSONATOR | | | Alexanderwerk 150 mm dia x100 mm face briquetter system. |
|
|
| 203737 | BRIQUETTER/CHILSONATOR | | | Stainless steel Bepex Compactor K300/200 Nr. 8921 with agitated feed hopper. Main drive 22KW Motor IP55.
|
|
|
| 207998 | BRIQUETTER/CHILSONATOR | | | Sanitary, Hosokawa Bepex 316LSS, type Pharmapaktor briquetter, Model L200/50 P, SN 10668, with Bepex screen mill Model FC 200, used only 100 hours. Complete in operating condition with original documents. Unit has volumetric horizontal feed screws that feed the vertical pre-denisfier screw, controlling the flow into the compacting rolls. Unit has (2) 200 MM diameter x 50 MM wide compacting rolls, with 20 kN/cm force. With automatic roll gap adjustment, automatic press force control, cooling system, dust tight and gas tight housing. All 400V/ 50 CYC/ 32A /3,75 kW Electric power.Srew drive 0,75 kW, roll drive 3,0 kW |
|
|
| 705723 | BRIQUETTER/CHILSONATOR | | | Koppern hydraulic double Roll briquetting press, type 30/10-IA 130 DG IS. diameter of press rings 1000mm, working width of press rings 130mm, max 70 kN/cm specific pressing force per working width, Operational speed of rolls 108-4.6 rpm (controlled), presetting of roller gap 2.0 mm, briquette volume 175.0 cm3, approx 5.0 tonnes/hr throughput, pressing force between rolls and 910 kN, drive motor 37kW, 380V/50Hz. 1500rpm. Approx dimensions 4100mm x 3980mm x 3100mm high, hydraulic system pressure 260-320 bar, screw feeder driven by 15kW/1500 rpm motor with frequency control |
|
|
|
|
|
|
|