|
|
|
|
|
|
|
Enter a product number or part of its description below...
OR
Now choose a product sub group (if any are present below)
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 1657 | COMPRESSOR | ROTARY | 200 | Mdl 1253 Nash rotary compressor. Designed for 200 cfm @ 75 psig. 3 x 3. Compressor alone. |
|
|
| 1796 | COMPRESSOR | CENTRIFUGAL | 2300 | 2,300 cfm @ 130 psig, Worthington 3-stage centrifugal air compressor. Mdl CAP-21. Package unit design, w/intercoolers, oil cooler and lube oil system mtd on (1) base. Takes 500 HP, 3600 rpm motor. SN T87680. |
|
|
| 5378 | COMPRESSOR | ROTARY | 800 | 800 cfm @ 100 psig discharge, Ingersoll-Rand Pac-Air 200 rotary screw type air compressor. Packaged style, w/aftercooler and approx 300 gal receiver rated 150 psi @ 650 deg F. Mdl TBDT, SN 7401, NB #627728. 200 HP, 1775 rpm drip-proof motor. |
|
|
| 8716 | COMPRESSOR | RECIPROCATING | 716 | 716 cfm @ 60 psi, Gardner Denver horiz reciprocating single staged, water cooled, oil free compressor. Mdl RL-14-CH, Size 14 x 9, SN 480957. Max pressure 60 psi @ 450 rpm. Comes w/following: General Electric 100 HP, 3/60/440 volt, 1750 rpm, Frame 444U, drip-proof motor; Dollinger dry type air filter silencer DS-900B-6; 36" x 8' ASME NB #7118 vert receiver P/N 68F39 w/125 psi working pressure @ 625 deg F; clean air after-cooler P/N D1-332 by Bell and Gossett, NB #481170, SN 155035, rated 125 psi @ 375 deg F for both shell and tubes, and moisture separator. Also w/starter panel and breaker. |
|
|
| 12322 | COMPRESSOR | ROTARY | 210 | Approx 210 cfm @ 70 psi, Nash 316SS "Hytor" single stage, positive displacement compressor. Mdl 1253-S. Driven by 100 HP, Allis Chalmers 3/60/220/440 volt, 1775 rpm TEFC motor, UL label. Coupled to Falk enclosed gear drive, input 1750 rpm, output 1986 rpm, ratio 1.135. Compressor rated for 2000 rpm. Mtd on CS stand. |
|
|
| 14794 | COMPRESSOR | ROTARY | 500 | 500 cfm @ 30 psi, Nash H-6 compressor. CS construction. Compressor only. Test #81808. |
|
|
| 16812 | COMPRESSOR | ROTARY | 1500 | ****1,500 scfm @ 100 psi discharge, Sullair screw type air compressor. Mdl 32-350-4, SN 003-44785. Unit included air cooled oil cooler augmented w/water cooling and coelessing filter. W/350 HP, 3/60/480 volt drip-proof motor. Skid mtd. |
|
|
| 16824 | COMPRESSOR | ROTARY | 2000 | ****2,000 scfm @ 115 psi, Sullair screw type air compressor. Mdl 32-450-H, SN 003-54550. W/air cooled aftercooler, water cooled oil system, coelessing filter, electronic low voltage starter. W/500 HP, 3/60/480 volt drip-proof motor. Skid mtd. |
|
|
| 16972 | COMPRESSOR | CENTRIFUGAL | 32721 | 32,721 acfm Clark centrifugal air compressor. 0 psig to 35 psig discharge. Mdl 4M3, Size 4, SN 4-3-465, contract #20203. 1st critical speed 7380, max continuous speed 5752, casing design pressure 150 psi at 475 deg F. 3 impellor. Compressor only. Speed increaser and motor sold separately. Motor is 4000 HP (stk #16976); (1) speed increaser (stk #18154). |
|
|
| 16973 | COMPRESSOR | CENTRIFUGAL | 27500 | 27,500 acfm Clark centrifugal air compressor. P1 = 14.4 psia, PD 49.7 psia @ 425 F. Mdl 4M4, Size 4M, SN 4-4-831. Capacity at inlet 27500 cfm, 1st critical speed 6750, max continuous speed 5850, casing design pressure is 65 psig @ 425 deg F. 4 impellor. Compressor only. Speed increaser and motor sold separately. Motor avail (stk #16976), 4000 HP. (1) speed increaser avail (stk #18154). |
|
|
| 17133 | COMPRESSOR | CENTRIFUGAL | 945 | 945 acfm, Sunstrand centrifugal gas compressor. Mdl LMC-313, SN 75115920. Ratio 2.47, PD 36.5 psia.Titanium construction. 1433 scfm, 1 stage. Max working pressure 1440 lbs @ 80 deg F. 6"x4" 600# flanges. W/200 HP Sundyne gearbox, 3550 rpm input, 28427 rpm output. No motor w/unit. Radial split case. |
|
|
| 17134 | COMPRESSOR | CENTRIFUGAL | 730 | ****UNUSED 730 acfm Sunstrand titanium centrifugal oxidizer recycle compressor. Mdl LMC-333, SN 78229326. Ratio 1.17, PD 476 psia, MW 41, 14330 scfm; 1 stage; max WP 1440 lbs @ 80 deg F. 6"x4" 600# flanges. W/400 HP Sundyne gearbox, 3550 rpm input, 14738 rpm output. No motor w/unit. |
|
|
| 17224 | COMPRESSOR | CENTRIFUGAL | 945 | ****945 acfm Sundstrand titanium centrifugal gas (MW43.9) compressor. 1 stage. Mdl LMC-313. Inlet P 14.8 psia @ 113 F, PD 36.5 @ 305 F, 28427 rpm. Max WP 1440 lbs. Vert flange mount, side suction and discharge. 6"x4". Radial splitcase, 8.25" radial open impellor. Driven by 150 HP TEFC Allis Chalmers motor, 3/60/460 volt, 3570 rpm thru Sundyne 200 HP gearbox. |
|
|
| 17266 | COMPRESSOR | CENTRIFUGAL | 730 | ****730 cfm, Sundstrand titanium oxidizer recycle centrifugal compressor. Mdl BMC-333, SN 75115917. Ratio 1.17, PD 476 psia, MW 41. Driven by Sundyne gearbox rated 3511/14738 rpm, requires 400 HP driver. CCW rotation. 14,330 scfm. Single stage. MWP 1440 psi @ 80 deg F. Flange mtd tilted sideways on horiz stand. 7.44" impellor. 6" x 4" 600# flanges. |
|
|
| 18043 | COMPRESSOR | RECIPROCATING | 300 | 300 cfm @ 100 psi reciprocating compressor. Mfd in France by Crepelle, Mdl 2549, SN 11613, Type 2HX2RT. Belt driven by 60 HP, 3/60/460 volt motor. Complete w/intercooler, automatic lubrication. Skid mtd. |
|
|
| 18044 | COMPRESSOR | RECIPROCATING | 300 | 300 cfm @ 100 psi reciprocating compressor. Mfd in France by Crepelle, Mdl 2274, SN 11327, Type 2HX2RT. Belt driven by 60 HP, 3/60/460 volt motor. Complete w/intercooler, automatic lubrication. Skid mtd. |
|
|
| 18045 | COMPRESSOR | RECIPROCATING | 300 | 300 cfm @ 100 psi reciprocating compressor. Mfd in France by Crepelle, Mdl 2274, SN 11328, Type 2HX2RT. Belt driven by 60 HP, 3/60/460 volt motor. Complete w/intercooler, automatic lubrication. Skid mtd. |
|
|
| 18177 | COMPRESSOR | RECIPROCATING | 600 | Nominal 600 cfm @ 100 psi, Worthington reciprocating compressor. Size 14-1/2x9-1/4x7, SN GE23215/GE23216, Type YB2-NL1. Unit requires 125 HP, 1780 rpm motor. |
|
|
| 18178 | COMPRESSOR | RECIPROCATING | 600 | Nominal 600 cfm @ 100 psi, Worthington reciprocating compressor. Size 14-1/2x9-1/4x7, SN GE23215/GE23216, Type YB2-NL1. Unit requires 125 HP, 1780 rpm motor. |
|
|
| 20702 | COMPRESSOR | RECIPROCATING | 185 | 185 cfm Chicago Pneumatic reciprocating compressor. Mdl 9T, SN 84007. W/40 HP, 460 volt TEFC motor. Inlet pressure 14 psi, outlet 175 psi. Skid mtd, includes receiver, cooler and lube system. |
|
|
|
|
|
|
|
|