 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 11868 | ELECTRICAL | MOTOR | 6200 | ****6,200 HP C.G.E. induction motor. Model 138604, SN 931741A. 3/60/2300 volt, 1760 rpm. 1355 amps, Type K, frame 7969S. |
|
|
| 16976 | ELECTRICAL | MOTOR | 4000 | 4,000 HP, 1793 rpm Elliott motor. 3/60/12500 volts. Horiz. 155 amps. SN 1S-11284. |
|
|
| 18142 | ELECTRICAL | MOTOR | 10 | 10 HP, 1740 rpm, Allis Chalmers motor. 3/60/220/440 volts. 27.4/13.7 amps, 256U frame. Type G22. Mdl 63, SN 51-480-633-353. Shaft 1 3/4" dia x 5" long w/7" drop. |
|
|
| 18307 | ELECTRICAL | MOTOR | 60 | 60 HP, 1770 rpm Reliance motor. 3/60/230/460 volts. 148/74 amps, 364T frame. Style TE, service factor 1.15. Shaft 2 3/8" dia x 5 5/8" long w/9" drop. Mtd on stand. |
|
|
| 18562 | ELECTRICAL | MOTOR | 30 | 30 HP, 3500 rpm, US Electric motor. 3/60/230/460 volts. 72/36 amps, 284TD frame. Style: TEFC, service factor 1.15. Model #9201140733. Shaft: 1 7/8" dia x 4 1/2" long with 7" drop. Mounting flange has 12" bolt center. |
|
|
| 19531 | ELECTRICAL | MOTOR | 200 | 200 HP, 311 rpm Westinghouse motor. 3/60/4000 volts. 47.5 amps, CS-3A45 frame. Service factor 1.15. SN L-M-15-81P56. Shaft 4 1/2" diameter x 12" long with 23" drop. Shaft has 12" OD flange. Code F. |
|
|
| 20701 | ELECTRICAL | MOTOR | 3280 | 800 HP, Reliance 3/60/2300 volt, 3600 rpm motor, squirrel cage, Frame #68098, Type P. |
|
|
| 21626 | ELECTRICAL | MOTOR | 3 | 3 HP, 1160 rpm, US Electric motor. 3/60/230/460 volt, UL label. 11.2/5.6 amps, 213T frame. Style: TEFC. Shaft 1 1/8" dia x 3 1/8" long w/5 1/4" drop. |
|
|
| 21642 | ELECTRICAL | MOTOR | 10 | 10 HP, 1760 rpm C-flange mount motor. 3/60/220/440 volts, UL label. 256UDZ frame. Service factor 1.0. Shaft 1" dia x 3 1/4" long. |
|
|
| 22036 | ELECTRICAL | MOTOR | 2000 | ****2,000 HP, 1200 rpm General Electric syncronous motor. 3/60/4000 volts. 224 amps, 986Y frame. Service factor 1.0. Mdl 5SR2123A38, SN KA8355239. Vert design. 80 deg C rise, 1550 KVA, 125 volts excitation, 43.3 amps. |
|
|
| 25784 | ELECTRICAL | MOTOR | 50 | 50 HP, 3/60/220/440 volt, 445S Frame, General Electric drip-proof motor. Mdl SKF445KB1. 127/63.5 amps. |
|
|
| 26791 | ELECTRICAL | MOTOR | 25 | 25 HP, 20.93:1 ratio, Foote Bros horiz gearhead motor. 84 rpm output. SN 1W-10383, Mdl 2255C-364. Class 3 gears. 3 7/8" x 8" output w/15 tooth single row roller chain sprocket. 13 1/2" centerline of shaft from base. Base has (4) 1 1/4" bolt holes on approx 20" and 22" centerline. 25 HP Louis Allis 1760 rpm, 220/440 volt, 3/60 motor, SN 2122359, Type OGX, Frame 364. |
|
|
| 29845 | ELECTRICAL | MOTOR | 3 | 3 HP, Eaton variable speed motor. 50/1750 rpm output, 3/60/230/460 volt. Mfd by Eaton-Dynamatic, Mdl AZ-100184, SN 740030-1045. Class B insulation, 1.15 service factor, 1750 rpm input speed, air cooled clutch, draws 10.4/5.2 amps. |
|
|
| 30154 | ELECTRICAL | STARTER AND SWITCH GEAR | | Parajust AC motor speed control for up to 10 HP. Mdl 6101, P/N 281910, SN 8308. Input 3/50-60/460 volt, 16 amps, output 10 HP, 0-460 VAC, 3 phase, 0-60 Hz. 15 amps continuous, 460 volt @ 60 Hz. Special 10PJE. |
|
|
| 30155 | ELECTRICAL | STARTER AND SWITCH GEAR | | Parajust AC motor speed control for up to 10 HP. Mdl 6101, P/N 281910, SN 8308. Input 3/50-60/460 volt, 16 amps, output 10 HP, 0-460 VAC, 3 phase, 0-60 Hz. 15 amps continuous, 460 volt @ 60 Hz. Special 10PJE. |
|
|
| 30362 | ELECTRICAL | MOTOR | 1 | 1 HP @ 1735 rpm, Louis Allis X-proof motor. For Pfaudler 2.5TWV drive, 3/60/230/460 volt, UL label for Class I, Grp D; Class II, Grp E,F,G. Has Reeves varispeed sheave on output shaft. |
|
|
| 34724 | ELECTRICAL | MOTOR | 450 | 450 HP, 600 rpm Westinghouse motor. 3/60/4160 volt. 62 amps, SN 1S-44P268. Open motor. |
|
|
| 42419 | ELECTRICAL | MOTOR | 40 | 40 HP Westinghouse, 1765 rpm TEFC motor. Mdl 1BFC, SN 7208. Frame 324T. 3/60. .98/.49 amps. Service factor 1. |
|
|
| 42426 | ELECTRICAL | STARTER AND SWITCH GEAR | 30 | 30 amps/20 HP, Electronic AC varispeed control. Mfd by Speed Star, Mdl 34X200D, SN 87121711R. 460 volts. Max HP 20, 30 amps. 3 phase. W/digital readout tachometer. |
|
|
| 42719 | ELECTRICAL | MOTOR | 5 | 5 HP, 3/60/230/460 volt, 1740 rpm motor. UL label. For RW drive. |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|