|
|
|
|
|
|
|
Enter a product number or part of its description below...
OR
Now choose a product sub group (if any are present below)
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 3491 | MILL | PEBBLE | 4X005 | 4' dia x 5' str side, Patterson pebble mill, jkt. (2) doors approx 12" x 12". Rated 25 psi int, 35 psi jkt. Porcelain lined shell. Split bearings, babbitted. W/bull gear for pinion drive. |
|
|
| 4091 | MILL | BALL | 6X008 | 6' x 8' jkt Patterson steel ball mill. Mdl DJ. Batch design, high speed crome manganese type. Shell measures 6' dia x 8' long, jkt for heating and cooling. Shell made of chrome manganese steel w/integral lifter "bumps". 12" x 12" port for feed and discharge. Mill shell supported on 2-14" x 12" trunnions with babbitt bearings, and steel legs giving approx 30" clearance from floor. One trunnion has 2" opening for liquid addition. Mill driven by bull gear and pinion w/reducer and 100 HP, 220/440 volt motor, UL label. Mill speed approx 20 rpm. Jkt pressure 15 psi. Total mill volume 1440 gal, working capacity according to product needs. Ball charge not included. |
|
|
| 6293 | MILL | ROLL | 6X012 | 6" x 12", two roll mill with cored rolls. Driven through Cleveland reducer by 7 1/2 HP, 3/60/220/440 gear motor, UL label, 5.06:1 ratio. |
|
|
| 6387 | MILL | ROLL | 24X060 | ****24" x 60" Adamson roll mill with cored rolls with rotary joints. Manual tension adjustment, pinion and gear drive. 15.99 rpm front roll, 23.826 rear roll. SN D-943-2. |
|
|
| 6388 | MILL | ROLL | 24X060 | ****24" x 60" Adamson roll mill with dual drives. Cored rolls with rotary joints. Manual tension adjustment, front roll driven through Falk #9GDB right angle reducer, ratio 8:1, by 100 HP 3/60/440 V, 720 rpm UL label motor. Rear roll driven through Falk #11GDB right angle reducer, ratio 8:1, by 150 HP D.C. motor 850 to 1200 rpm, 230 V, 15.99 rpm front roll, 16.89 to 23.826 rpm rear roll. With hinged guides. Mfd. 1954, SN D-943-1. |
|
|
| 9938 | MILL | BALL | 4X005 | 4' x 5' Economy CS buhrstone lined ball mill. 10" x 14" port and cover with 1-2" opening. SN 5082. Mill driven by Reliance 5 HP, 3/60/220/440 volts, 1745 rpm motor, SN 21A106A. With Falk shaft mounted drive to 3 7/16" spherical roller bearing. Ratio 23.68:1. Mill speed approx. 74 rpm. Total mill volume, approx 470 gals. |
|
|
| 9966 | MILL | PEBBLE | 4X005 | Paul O. Abbe 304 SS pebble mill, ceramic tiled lined. 48" diameter x 60" straight side. SN 67110. Batch design, fitted with dust housing. Mounted on steel frame for 3'6" ground clearance. Driven by 10 HP, 3/60/220/440 volt, 1760 rpm motor, UL label, coupled to 10 HP Falk reducer, 11.72:1 ratio. Final mill speed 150 rpm. |
|
|
| 11562 | MILL | PEBBLE | 6X009 | 6' x 9' Patterson jkt pebble mill. NB #873. Jkt rated 15 psi. Fully jkt including both ends. Dished ends. Lined with Belgium block lining. Driven by bull gear on one end of mill. 18" charge port, 3" discharge. No motor. |
|
|
| 13172 | MILL | PEBBLE | 3X004 | 3' dia x 4' long Patterson CS pebble mill. SN 61153. Int rated 14 psi. Has bull gear pinion gear drive. Powered by 7 1/2 HP, 3/60/230/460 volt motor w/brake flange mtd to Westinghouse gear reducer, 190 rpm output. No lining in mill, (3) int baffles, no charge included. 15 1/2" x 9 1/2" charge port (no door). Mtd on "A" frame supports. |
|
|
| 13586 | MILL | BALL | 3X004 | 32" dia x 42" long CS jkt wet ball mill. Full CS jkt. With 7 1/2 HP, 3/60 motor. Triple chain drive. Has 8" x 42" feed/discharge, 4" access port w/cover on end of shell. Mtd on pillow block bearings. Rotary joint for jkt. No charge. |
|
|
| 19681 | MILL | COLLOID | 3 | 3 HP, all 304 SS Premier colloid mill. Type 3-UB7, SN 355-B. 304 SS mill housing. 12" diameter x 16" deep 304 SS feed hopper. 304 SS discharge chute. Unit is driven by 3 HP, 3/60/230/460 volt, 3500 rpm motor, UL label. Mounted on 20" high stand. |
|
|
| 22656 | MILL | COLLOID | | Gifford Wood (Greerco) 316SS colloid mill. SN QV-6-3-6904. Driven by approx 1 HP motor w/General Electric volt-pak speed adjuster rated 1/60/240 volt. Unit has 12" dia x 9" str side 316SS jkt feed hopper w/polished finish. Mtd on stand w/wheels. |
|
|
| 23987 | MILL | PEBBLE | 2X002 | 24" dia x 30" long, Paul O Abbe CS jkt pebble mill. Unit has 9 1/2" x 8" opening w/cover for feed and discharge. Driven by 10 HP, 3/60/230/460 volt, 1750 rpm motor, UL label. Mounted on A-frame stands. Mill housing is covered in sheet metal housing. |
|
|
| 23989 | MILL | PEBBLE | 2X002 | 24" dia x 30" long, Paul O Abbe CS jkt pebble mill. Unit has 9 1/2" x 8" opening w/cover for feed and discharge. Driven by 10 HP, 3/60/230/460 volt, 1750 rpm motor, UL label. Mounted on A-frame stands. Mill housing is covered in sheet metal housing. |
|
|
| 23990 | MILL | PEBBLE | 2X002 | 24" dia x 30" long, Paul O Abbe CS jkt pebble mill. Unit has 9 1/2" x 8" opening w/cover for feed and discharge. Driven by 10 HP, 3/60/230/460 volt, 1750 rpm motor, UL label. Mounted on A-frame stands. Mill housing is covered in sheet metal housing. |
|
|
| 24044 | MILL | ROLL | 6X012 | 6" x 12", Vaughn combination 2-roll lab mill and 3-roll calendar. W/accessories and drive. Solid frame, no caps. Both units driven by same drive. 8" x 14" vert 3-roll calendar. |
|
|
| 24971 | MILL | SHOT AND SAND | 1 | 304SS Szegvari attritor sand mill. Mfd by Union Process Co, Type B, Size 1, SN 1285. Direct driven by 1/2 HP, 3/60/220/440 volt, US varidrive motor, min 38 rpm, max 380 rpm. Missing coupling. |
|
|
| 25538 | MILL | COLLOID | 10 | Eppenbach Mdl VT, SS water cooled colloid mill. SN 9-5602. Unit has 10 HP, 3/60/220/440 volt motor. |
|
|
| 25716 | MILL | SHOT AND SAND | | Lab size, 304SS Redhead sand mill. Mfd by Chicago Boiler, SN 651125-5, Mdl L-3-J Standard. Jkt chamber. 3" dia x 8" deep. Btm discharge. Hydraulic motor drive (no powerpak). Mtd on stand. |
|
|
| 28507 | MILL | PEBBLE | 5X006 | 4'6" dia x 5'6" long, Patterson porcelain lined pebble mill. 9" x 16" charge port. Bull gear driven by 15 HP, 3/60/220/440 volt, 1800 rpm gearhead motor. Mtd on A-frame stands. W/porcelain ball charge. |
|
|
|
|
|
|
|
|