 |
|
Need Help? or Have something for sale? Use this:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below...
Finally, you may filter the results based on capacity below
| 29 Items Returned | Go To Page: | 1 | 2 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 4091 | MILL | BALL | 6X008 | 6' x 8' jkt Patterson steel ball mill. Mdl DJ. Batch design, high speed crome manganese type. Shell measures 6' dia x 8' long, jkt for heating and cooling. Shell made of chrome manganese steel w/integral lifter "bumps". 12" x 12" port for feed and discharge. Mill shell supported on 2-14" x 12" trunnions with babbitt bearings, and steel legs giving approx 30" clearance from floor. One trunnion has 2" opening for liquid addition. Mill driven by bull gear and pinion w/reducer and 100 HP, 220/440 volt motor, UL label. Mill speed approx 20 rpm. Jkt pressure 15 psi. Total mill volume 1440 gal, working capacity according to product needs. Ball charge not included. |
|
|
| 9938 | MILL | BALL | 4X005 | 4' x 5' Economy CS buhrstone lined ball mill. 10" x 14" port and cover with 1-2" opening. SN 5082. Mill driven by Reliance 5 HP, 3/60/220/440 volts, 1745 rpm motor, SN 21A106A. With Falk shaft mounted drive to 3 7/16" spherical roller bearing. Ratio 23.68:1. Mill speed approx. 74 rpm. Total mill volume, approx 470 gals. |
|
|
| 13586 | MILL | BALL | 3X004 | 32" dia x 42" long CS jkt wet ball mill. Full CS jkt. With 7 1/2 HP, 3/60 motor. Triple chain drive. Has 8" x 42" feed/discharge, 4" access port w/cover on end of shell. Mtd on pillow block bearings. Rotary joint for jkt. No charge. |
|
|
| 30673 | MILL | BALL | 2X002 | 24" dia x 22" str side, CS batch type ball mill. 10" x 9" feed/discharge. W/wet discharge plate and flush valve. CS steam jkt on str side. Mtd on "A" frames. Loaded w/steel shot. Bull gear and pinion. |
|
|
| 30674 | MILL | BALL | 2X003 | 24" dia x 30" str side, CS batch type ball mill. 10" x 11" charge door. CS water/steam jkt. "A" frames. Bull gear w/cover. |
|
|
| 33230 | MILL | BALL | 5X003 | 52" x 36", Patterson CS batch type jkt ball mill. SN 631758. Jkt rated 14 psi, int rated 14 psi. 12" x 12" feed port. Bull gear driven by 15 HP, 3/60/220/440 volt, 1765 rpm w/gear reducer rated 55 rpm output, ratio 11.39:1. Has (30) 5 gal containers of charge. Mtd on A-frames. |
|
|
| 35195 | MILL | BALL | 5X005 | 4'6" dia x 4'6" long, Patterson jkt CS, chrome manganese lined ball mill. SN 65-963. Jkt rated 14 psi, int rated 14 psi. CS jkt. 9 1/2" x 15 1/2" charge port w/cover. Unit is bull gear driven by 20 HP, 3/60/220/440 volt, 1770 rpm motor w/Foote Bros reducer, ratio 11.4:1, 155 rpm output. Mounts in I-beam frame. |
|
|
| 35196 | MILL | BALL | 6X005 | 6' dia x 5' long, Patterson CS ball mill. 12" x 15" charge port w/cover. Batch type. Bull gear driven by 75 HP, 3/60/440 volt drip-proof motor. No stands. |
|
|
| 39537 | MILL | BALL | 9X010 | ****8'6" dia x 9'6" long, alumina lined jkt continuous ball mill. Mfd by Steele and Cowliss Ltd, Mdl 572 cu ft. Trunnion feed and discharge. Bull gear, pinion gear drive. 150 HP, 3/50/415 volt motor. Direct coupled to Radicon gearbox, Size NU14, 4.51 ratio. 18" x 18" door on mill side. Unit mtd on I-beam skid. No charge w/unit. Mill rotation 17 rpm. |
|
|
| 43090 | MILL | BALL | 2X002 | 24" dia x 22" str side CS batch type ball mill. Mfd by Patterson, SN B622. Jkt rated 35 psi. Int rated 25 psi. 10" x 9" feed, discharge, clamp cover, CS steel jkt on str side. Mtd on frame w/5 HP, 3/60/220/440 volt motor, UL label and gear reducer, max output rpm 190. |
|
|
| 70747 | MILL | BALL | 5X006 | 5' dia x 6' long buhrstone lined ball mill. Has 12" x 12" charge port. Unit driven by 15 HP, 3/60/220/440 volt, 1740 rpm drip-proof motor thru Falk Mdl 1524E204A5, 10.23:1 ratio, 170 rpm output. |
|
|
| 79104 | MILL | BALL | 6010 | 6' dia x 10' long CS/Ni-hard lined Blaw Knox batch type jkt ball mill. SN 17050, NB #7377. Int rated 155 psi/vac @ 650 deg F, jkt rated 200 psi @ 650 deg F. 2"-6" CS ball charge. Gear driven by 40 HP, 3/60/220/440 volt, 1760 rpm motor thru Phila gear reducer, ratio 30.6:1. Bull and pinion gear ratio 4.85:1. Trunnion mtd. Unit has Manzel fully centralized lubrication system w/6-station Manzel oil pump. Mtd on stands. W/18" manway. W/control panel and starter box. |
|
|
| 79105 | MILL | BALL | 6010 | 6' dia x 10' long CS/Ni-hard lined Blaw Knox batch type jkt ball mill. SN 17051, NB #7479. Int rated 155 psi/vac @ 650 deg F, jkt rated 200 psi @ 650 deg F. 2"-6" CS ball charge. Gear driven by 40 HP, 3/60/220/440 volt, 1760 rpm motor thru Falk gear reducer, ratio 32.69:1. Bull and pinion gear ratio 4.85:1. Trunnion mtd. Unit has Manzel fully centralized lubrication system w/6-station Manzel oil pump. Mtd on stands. W/18" manway. W/control panel and starter box. |
|
|
| 85265 | MILL | BALL | 3X006 | 3' dia x 6' long, CS ball mill. Mfd by Patterson-Ludlow, SN 1-292. 10" x 16" port w/cover. Missing end assembly. No motor. |
|
|
| 87226 | MILL | BALL | 4X004 | 4'6" dia x 4'6" str side, Patterson 304SS ball mill. SN 672659, NB #1444. Shell rated 70 psi @ 303 deg F, jkt rated 70 psi @ 303 deg F. 15" x 9 1/2" opening. Gear driven by 25 HP, 3/60/480 volt motor thru gear reducer, 9.1:1 ratio, w/8" sprocket. No stand w/unit. |
|
|
| 97152 | MILL | BALL | 07005 | 7ft. dia (~ 2135mm) X 5ft. long (~ 1520mm); CS conical ball mill. Mfd by Hardinge. Belt driven by 150 HP, 3/50/415 volt, 730 rpm motor via bull gear. CS balls. Openings: 16" x 11" (400mm x 279mm), 2-15" (380mm). |
|
|
| 97153 | MILL | BALL | 7X005 | 7ft. dia (~ 2135mm) X 5ft. long (~ 1520mm), CS conical ball mill. Mfd by Hardinge. Belt driven by 150 HP, 3/50/415 volt, 730 rpm motor via bull gear. CS balls. Openings: 16" x 11" (400mm x 279mm), 2-15" (380mm). |
|
|
| 97154 | MILL | BALL | 7X005 | 7ft. dia (~ 2135mm) X 5ft. long (~ 1520mm), CS conical ball mill. Mfd by Hardinge. Belt driven by 150 HP, 3/50/415 volt, 730 rpm motor via bull gear. CS balls. Openings: 16" x 11" (400mm x 279mm), 2-15" (380mm). |
|
|
| 97155 | MILL | BALL | 7X005 | 7ft. dia (~ 2135mm) X 5ft. long (~ 1520mm, CS conical ball mill. Mfd by Hardinge. Belt driven by 150 HP, 3/50/415 volt, 730 rpm motor via bull gear. CS balls. Openings: 16" x 11" (400mm x 279mm), 2-15" (380mm). |
|
|
| 104552 | MILL | BALL | | ****316SS horiz agit ball mill. Mfd by Netzsch, Type LMJ-55, SN 204818. Jkt grinding chamber. Chamber 400mm dia x 1430mm long. V-belt driven by 75 KW, 3/50/500 volt, 990 rpm EX motor. |
| 29 Items Returned | Go To Page: | 1 | 2 |
|
|
|
|
|
|
|
|