 |
|
Need Help? or Have something for sale? Use this:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below...
Finally, you may filter the results based on capacity below
| 40 Items Returned | Go To Page: | 1 | 2 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 15541 | MIXER | NAUTA | 4 | 3.5 cu ft working cap, JH Day 304SS Nauta mixer. SN 85603. 38" dia. Has 3 HP drive, 82.6 rpm screw, 2.8 rpm arm. Btm discharge w/valve. Mtd on (4) legs. |
|
|
| 74191 | MIXER | NAUTA | 353 | 353 cu ft 304SS Vert-o-mix "Epicyclic" mixer (Nauta type). Mfd by Tower (USA)/Jenkins (UK), Mdl 353HU13. Single screw. Mixing chmaber 12' dia x 17'2" cone. Screw driven by 15 HP, 3/60/220/440 volt motor from the btm. Rotating arm driven by 3 HP, 3/60/220/440 volt motor w/gearbox. Orbiting screw moves around inside of mixer in epicyclic motion while screw is turning. Screw 13" dia w/ball joint on btm that travels up and down as screw moves in epicyclic motion. Conical shell bolted in 3-sections w/flat cover. |
|
|
| 76661 | MIXER | NAUTA | 10 | 10.5 cu ft (78 gal) 304SS Nauta mixer. Mfd by JH Day, Series D, Mdl 105. Int has polished finish. 52" x 61", overall 90" long. Hinged half cover. 10" btm discharge. Driven by 5 HP, 3/60/230/460 volt, 1200 rpm motor. 64 rpm screw speed, 2.2 rpm arm speed. On (4) legs for mezzanine mounting. |
|
|
| 79485 | MIXER | NAUTA | 52 | ****1.5 cu meter working capacity 304SS Nauta mixer. Mfd by Gpofa, blt 1989. Shell 1.85m dia x 3600mm conical section. Driven by 4 KW, 3/50/380 volt motor |
|
|
| 79815 | MIXER | NAUTA | 35 | 35.3 cu ft (1.0 cu meter), 316SS Nauta mixer. Mfd by Ergon, Type HV1000-1, blt 1986. Shell 1560mm dia x 2184mm conical section. Single screw type. Screw 310mm dia and 250mm pitch. 400mm top feed, 250mm center discharge. Driven by 3 KW, 3/50/380 volt XP motor. Arm speed 20 rpm, screw speed 60 rpm. |
|
|
| 87282 | MIXER | NAUTA | 25 | ****Approx 25 cu ft working capacity, 304SS Day Nauta mixer. SN 1716. 66" dia x 80" deep, polished internal. Has flat bolt top. Single screw agit design. Driven by 1.5 HP, 230/460 volt and 5 HP, 190/380 volt drivers. Has 1/2 hinged cover. 8" discharge. Mtd on CS legs. |
|
|
| 92275 | MIXER | NAUTA | 131 | ****131 cubic feet working capacity, 316SS JH Day jacketed Nauta mixer. SN 1745, Type FB131, blt 1988. Int rated atmospheric @ 353 deg F, jkt rated 125 psi @ 353 deg F. 99 1/2" diameter x 137" cone height. Single screw driven by 20 HP, 3/60/575 volt, 1745 rpm motor, output rpm 64. Orbiter arm driven by 3 HP, 3/60/575 volt, 1750 rpm motor. 3-section 304SS dimple jacket. 20 HP lumpbreaker. Mechanical seal with lubrication system. 15" diameter free hanging internal screw. Pneumatic 6" diameter gate discahrge valve. 1/8" bolted cover. W/24" section hinged cover. Openings: top 4-1" flanged, 3-2" flanged; side btm 2-8" outlets. (3) lugs for mount. |
|
|
| 94099 | MIXER | NAUTA | 247 | ****247 cu ft Day 304SS single screw Nauta mixer. SN 82658, Mdl #MBX-2470. Mixing chamber 120" dia x 173" cone. Screw driven by 15 HP, 3/60/220/440 volt, 1750 rpm motor. Rotating arm driven by 2 HP, 3/60/230/460 volt, 1725 rpm motor. Openings: 2-24", 2-8". Screw has btm steady bearing. Shaft speed 59.87 rpm, rotation 1.437 rpm. |
|
|
| 94101 | MIXER | NAUTA | 247 | ****247 cu ft Day 304SS single screw Nauta mixer. SN 83231, Mdl #MBX-2470. Mixing chamber 120" dia x 173" cone. Screw driven by 15 HP, 3/60/220/440 volt, 1750 rpm motor. Rotating arm driven by 2 HP, 3/60/230/460 volt, 1725 rpm motor. Openings: 2-24", 2-8". Screw has btm steady bearing. Shaft speed 59.87 rpm, rotation 1.437 rpm. |
|
|
| 94525 | MIXER | NAUTA | 530 | ****530 cu ft (15000 liter) 304SS Nauta mixer. Mfd by Gericke, SN 150004, Type Vert-o-mix. 3700mm dia x 5620mm long conical section. Overall height at installation 8168mm. Mixing arm driven by 15 KW, 3/50/500 volt, 1440 rpm motor, connected to gear reducer rated 20 PS. Screw driven from btm by 11 KW, 3/50/290/500 volt, 1400 rpm motor, w/SEW Eurodrive gear reducer, Type SF70-LM70, 36 rpm, 38.66:1 ratio. W/pneumatic operated discharge valve. Top has 600mm manway w/cover, 1-150mm light, 1-200mm feed. Lugs for mounting. |
|
|
| 94526 | MIXER | NAUTA | 530 | ****15000 liter 304SS Nauta mixer. Mfd by SN 150004, Type Vert-o-mix. 3700mm dia x 5620mm long conical section. Overall height at installation 8168mm. Mixing arm driven by 15 KW, 3/50/500 volt, 1440 rpm motor, connected to gear reducer rated 20 PS. Screw driven from btm by 11 KW, 3/50/290/500 volt, 1400 rpm motor, w/SEW Eurodrive gear reducer, Type SP70-LM70, 36 rpm, 38.66:1 ratio. W/pneumatic operated discahrge valve. Top has 600mm manway w/cover, 1-150mm light, 1-200mm feed. Lugs for mounting. |
|
|
| 96024 | MIXER | NAUTA | 35 | 1.0 cu meter 304SS Nauta mixer. Mfd by Ergon, Type HV-1000. 1560mm dia x 2184mm conical section. Single screw type. Screw 310mm dia x 250mm pitch. 400mm top feed, 250mm btm discharge. Driven by 4.0 KW, 3/50/380 volt, Type S60/MR2M, 960 rpm motor. |
|
|
| 101055 | MIXER | NAUTA | 35 | ****35 cu ft (1.0 cu meter) working capacity, 304SS Nauta mixer. Mfd by Ergon/Pharming, Type HV1000, No 05. Mixing body 1300mm ID, 1560mm OD, conical section 2184mm. Screw 310mm dia x 1857mm long w/250mm pitch. Shaft 60mm dia. Driven by 3.0 KW, 3/50/380 volt, 970 rpm EX3SD. Planetary arm rotation 2 rpm, screw rotation 60 rpm. W/manual discharge valve. Lugs for mounting. |
|
|
| 101056 | MIXER | NAUTA | 35 | ****35 cu ft (1.0 cu meter) working capacity, 304SS Nauta mixer. Mfd by Ergon/Pharming, Type HV1000, No 07. Mixing body 1300mm ID, 1560mm OD, conical section 2184mm. Screw 310mm dia x 1857mm long w/250mm pitch. Shaft 60mm dia. Driven by 3.0 KW, 3/50/380 volt, 970 rpm EX3SD. Planetary arm rotation 2 rpm, screw rotation 60 rpm. W/manual discharge valve. Lugs for mounting. |
|
|
| 105852 | MIXER | NAUTA | 123 | 123.6 cu ft working capacity, CS Nauta mixer. Mdl #MB1225. Single screw w/steady bearing. 96" dia x 10' cone. Single motor drive system, w/belt drive, 15 HP, 3/60/220/440 volt, 1175 rpm motor thru Day gear reducer. Screw ratio 3:1, orbit ratio 88.93:1. 6" side btm outlet. |
|
|
| 105875 | MIXER | NAUTA | 12 | 12 cubic feet working capacity (18 cubic feet total) 304SS Day Nauta mixer. SN 88812. 44" dia x 63" cone. 4" btm outlet. Single screw. Bridge mtd gearbox. No motor or covers. Mtd on (4) legs. |
|
|
| 106017 | MIXER | NAUTA | 35 | 2800 liter 1.4301 (304SS) Nauta mixer. Manufactured by Gericke, Type Vert-o-mix. 2200mm diameter x 2879mm conical section. Single screw 300mm diameter x 250mm pitch. Orbiting arm driven by 0.33 PS SEW Type RF93 gear drive, output speed 5.5 rpm. Screw under driven by 7.5 PS SEW Type RF83, 3/50/380 volt motor, output speed 64 rpm. Side bottom discharge with valve, driven by 0.55 KW, 3/50/380 volt motor. Bottom bearings on shaft. Openings: top 600mm x 600mm, 1-300mm, 1-250mm. Mounting ring. |
|
|
| 106041 | MIXER | NAUTA | 99 | 2800 liter 1.4301 (304SS) Nauta mixer. Manufactured by Gericke, Type Vert-o-mix. 2200mm diameter x 2879mm conical section. Single screw 300mm diameter x 250mm pitch. Orbiting arm driven by 0.33 PS, 3/50/380 volt SEW Eurodrive Type RF82A. Screw underdriven by 5.5 KW, 3/50/380 volt motor. Screw speed 64 rpm. Orbital arm speed 5.5 rpm. With side bottom discharge valve driven by 0.5 KW motor. Openings: top 1-250mm diameter , 1-300mm, 600mm x 600mm. Overall mixer height 4843mm. Mounting ring. Bottom bearing on shaft. |
|
|
| 106047 | MIXER | NAUTA | 99 | 2800 liter 1.4301 (304SS) Nauta mixer. Mfd by Gericke, Type Vert-o-mix. 2200mm diameter x 2879mm conical section. Single screw 300mm diameter x 250mm pitch. Orbiting arm driven by 0.33 PS SEW Type RF93 gear drive, output speed 5.5 rpm. Screw underdriven by 7.5 PS SEW Type RF83, 3/50/380 volt motor, output speed 64 rpm. Side bottom discharge with valve driven by 0.55 KW, 3/50/380 volt motor. Bottom bearings on shaft. Openings: top 600mm x 600mm, 1-300mm, 1-250mm. Mounting ring. |
|
|
| 106048 | MIXER | NAUTA | 99 | 2800 liter 1.4301 (304SS) Nauta mixer. Manufactured by Gericke, Type Vert-o-mix. 2200mm diameter x 2879mm conical section. Single screw 300mm diameter x 250mm pitch. Orbiting arm driven by 0.33 PS SEW Type RF93 gear drive, output speed 5.5 rpm. Screw underdriven by 7.5 PS SEW Type RF83, 3/50/380 volt motor, output speed 64 rpm. Side bottom discharge with valve driven by 0.55 KW, 3/50/380 volt motor. Bottom bearings on shaft. Openings: top 600mm x 600mm, 1-300mm, 1-250mm. Mounting ring. |
| 40 Items Returned | Go To Page: | 1 | 2 |
|
|
|
|
|
|
|
|