New search | Used PLASTIC | Used MAJOR ITEM PLASTIC

<= >=

Filter Capacity

36 Items Returned Go To Page: 1 2
		Stock Number	Product	Sub Group	Capacity	Description
Select		6301	PLASTIC	MAJOR ITEM	60	New Britain Model 60-3 horizontal screw type injection molding machine, SN #2610P, 60 ton, 5/2.5 HP motor with brake, 20 HP hydraulic system, separate control panel.
Select		6304	PLASTIC	MAJOR ITEM	15	Stokes Model 800, 15 ton automatic molding press, SN #C13865. 2 HP main motor, down acting.
Select		20037	PLASTIC	MAJOR ITEM		Mokon 12 KW single zone water temp control unit. Mdl HS4A12-11, SN 23687. Uses water in an open system for automatic heating and cooling. Unit rated for up to 250 deg F (121 deg C) w/2 HP pump rated @ 40 gpm @ 60 psi. Electricals: 3 phase, 60 Hz, 460 volt.
Select		20714	PLASTIC	MAJOR ITEM		8" OD x 4' long, CS Homak extractor. SN 01081EZ578R, Mdl HM7R. Electrically heated. Belt driven Dodge reducer, Size BR500A, ratio 25.6:1, max HP 22.3. Screw feed and discharge.
Select		20715	PLASTIC	MAJOR ITEM		8" OD x 4'6" long, CS Homak cooker. SN 0908LC50810, Mdl HR8. Electrically heated, Dodge reducer, 6" feed opening.
Select		22008	PLASTIC	MAJOR ITEM		Brown Mdl BT35 bottle neck trimmer. SN 3798. 3/60/460.
Select		29683	PLASTIC	MAJOR ITEM		4" x 5" Impression Area Vansco hot stamping machine. Max 800 deg F. Mdl MC700, SN 24. Motorized feed and discharge. W/all operator controls.
Select		35243	PLASTIC	MAJOR ITEM		30" John Dusenbery slitter rewinder. Mdl 635TQ, SN 57667. Unit is 30" wide w/(4) Duplex rewinders for 2 1/2" shaft.
Select		37584	PLASTIC	MAJOR ITEM		12" dia Egan SS crammer feeder. Equipped w/4' dia x 4' str side SS hopper and Acrison 3" dia x 12" long screw feeder w/12" x 12" hopper. Crammer driven by 50 HP hydraulic drive.
Select		37644	PLASTIC	MAJOR ITEM		3' wide x 11'6" long Rotex 304SS vibratory cooler (plastic cooler). Mdl 80-C. Unit water cooled thru plate coil. Driven by approx 5 HP motor and Rotex gearbox.
Select		37665	PLASTIC	MAJOR ITEM		Approx 15 HP Cumberland CS rotary cutter. Belt driven by approx 15 HP motor. 12" dia x 21", 6-blade rotor. Open top, cone to 6" btm outlet. Mtd on steel frame.
Select		39094	PLASTIC	MAJOR ITEM		10 HP Simon Barron 316SS spin dryer. SN 74-MQ-1516. 24" dia x 5' high rotor, 375 rpm. Unit belt driven by 10 HP, 3/50/380/420 volt, 1430 rpm motor.
Select		39333	PLASTIC	MAJOR ITEM		5.5 HP Simon Barron 316SS spin dryer. 24" dia x 3' high rotor. Belt driven by 5.5 HP, 3/50/415 volt, 1410 rpm motor. Dryer 425 rpm.
Select		49760	PLASTIC	MAJOR ITEM		48" wide x 144" long, Rotex CS single deck cooler. Mdl 520100, SN 100272. 48 sq ft per deck. 100 psi max water pressure. W/dust cover. 7 1/2 HP, 3/60/230/460 volt TEFC motor.
Select		73521	PLASTIC	MAJOR ITEM		16'6" long water bath. 49" wide x 11" deep w/bath section fabricated of heavy duty aluminum. Bath section moves in and out by air cylinder and rollers. Unit is completely unitized on common structural steel framework and is caster mtd on rubber wheels for mobility. All piping including control valves for water in and out is mtd to unit.
Select		73522	PLASTIC	MAJOR ITEM		14' long water bath. 49" wide x 11" deep w/bath section fabricated of heavy duty aluminum. Bath section moves in and out by air cylinder and rollers. Unit is completely unitized on common structural steel framework and is caster mtd on rubber wheels for mobility. All piping including control valves for water in and out is mtd to unit.
Select		73570	PLASTIC	MAJOR ITEM		Sterlco 36KW single zone oil temp control unit. Mdl 6016CX, SN 43202. Uses heat transfer fluid in closed loop system for automatic heating and cooling. Unit rated for up to 550 deg F (288 deg C) w/2 HP motor pump rated @ 24 gpm @ 50 psi. Complete w/18.1 sq ft heat exchanger. Electricals: 3 phase, 60 Hz, 460 volt, full load 47 amps.
Select		73574	PLASTIC	MAJOR ITEM		3' x 6', 304SS Rotex cooler. SN 27783, Mdl 40C. Rated for 100 psi water pressure, 843 rpm. Driven by approx 2 HP motor. Mtd on CS stand.
Select		73601	PLASTIC	MAJOR ITEM		Sterlco 24 KW per zone dual zone oil temp control unit. Mdl F6026DX, SN 40355. Uses heat transfer fluid in a closed loop system for automatic heating and cooling. Unit rated for up to 550 deg F (288 deg C) w/each zone having 1 HP pump rated @ 18 gpm @ 30 psi and 3.6 sq ft heat exchanger. Electricals: 3 phase, 60 Hz, 480 volt, full load amps 62.
Select		75272	PLASTIC	MAJOR ITEM		Kannegiesen-Martin CS plastic molding press. SN 3957. Electric heating elements. 16" x 20" platen, w/tilt mechanism. 5 HP, 3/60/230/460 volt Vikers hydraulic pump, SN PV85-RSY20-CC11. Mtd on 30" x 18" x 20" oil tank.
36 Items Returned Go To Page: 1 2