 |
|
Need Help? or Have something for sale? Use this:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below...
OR
Now choose a product sub group (if any are present below)
| 76 Items Returned | Go To Page: | 1 | 2 | 3 | 4 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 44362 | PULP/PAPER | | | Mdl E2K Impco-Escher Wyss 316SS deflaker. Mfd by Ingersoll Rand, SN H-073. 100 ton/day @ 130-500 gpm. 5" dia center feed. 5" dia outlet on top of mill housing. Unit has hinged front head w/fixed grinding plate. Vert rotor 15" dia intermeshes w/fixed plate for grinding. Rotor direct driven by Toshiba 200 HP, 3/60/4000 volt, 1770 rpm TEFC motor. W/space heater. Unit rated 7000 lbs/hr. Base mtd. |
|
|
| 44418 | PULP/PAPER | | | Hycor Mdl DS391-1 discostrainer. 39" dia. Single disc unit. 300 gpm. 16 sq ft filter area. 6 sq ft submerged with 1/2 HP. SN H-1803019. |
|
|
| 207201 | PULP/PAPER | | 150 | 150 HP, 30" x 60" long, Cast Iron, Conical Chester paper refiner. Manufactured by Chester Mfg Co (Hamm, CT), type 596. With 4" inlet and 4" outlet. Manuaual Handwheel gap adjustment. Direct coupled to a 150HP, 3/60/440V industion motor, Frame 6344S. |
|
|
| 207202 | PULP/PAPER | | 0 | 150 HP, 30" x 60" long, Cast Iron, Conical Chester paper refiner. Manufactured by Chester Mfg Co (Hamm, CT), type 596. With 4" inlet and 4" outlet. Manuaual Handwheel gap adjustment. Direct coupled to a 150HP, 3/60/440V industion motor, Frame 6344S. |
|
|
| 207203 | PULP/PAPER | | 150 | 150 HP, 30" x 60" long, Cast Iron, Conical Chester paper refiner. Manufactured by Chester Mfg Co (Hamm, CT), type 596. With 4" inlet and 4" outlet. Manuaual Handwheel gap adjustment. Direct coupled to a 150HP, 3/60/440V industion motor, Frame 6344S. |
|
|
| 207204 | PULP/PAPER | | 150 | 150 HP, 30" x 60" long, Cast Iron, Conical Chester paper refiner. Manufactured by Chester Mfg Co (Hamm, CT), type 596. With 4" inlet and 4" outlet. Manuaual Handwheel gap adjustment. Direct coupled to a 150HP, 3/60/440V industion motor, Frame 6344S. |
|
|
| 207205 | PULP/PAPER | | 150 | 150 HP paper refiner, similiar to a Jordan, manual gap adjustment. |
|
|
| 207206 | PULP/PAPER | | | 72" wide SS Dorr Oliver DSM sidehill screen, Serial number 57483-1, with 6" solids outlet, and (2) 10" filtrate outlets. Open front, with (2) back access doors on hinges. |
|
|
| 207208 | PULP/PAPER | | | Black Clawson 70" wide guillotine roll splitter. Model 60 x 70, Serial number 170. Hydraulically operated blade, splits 60" diameter rolls, with hydraulic power pack. |
|
|
| 207209 | PULP/PAPER | | | Beloit Tri-Dyne SS pulper, model 5220, Serial number BC-1325, 12' diameter x 7' deep, pulper blades are underdirven by a 400 HP 3/60/230/460V motor. |
|
|
| 207213 | PULP/PAPER | CONVERTING | 0 | Cameron Winder, 98" wide,with 7.5hp overhead crane for re-moving wound rolls. |
|
|
| 207214 | PULP/PAPER | | | 102" Trim Beloit Fourdrinier Paper machine for lightweight and specialty grade papers. Headbox and Fourdrinier table with 7 vacuum foil boxes. Valmet Rotoformer for secondary layer can be utilized for numerous spectialty grades. Three (3) section straight through presses. Barton and Fales Dryer section containing (38) 36" OD dryer cans. Vertical size press section. Six (6) roll conventional calender stack . Horizontal track reel with primary and secondary arms. Cameron Mdl 458 two drum Slitter rewinder. Machine last reported to run 500 FPM. Includes vacuum pump system, oil and lubrication systems, line shaft drives, instrumentation, valves, piping, spare rolls, and related accessories. |
|
|
| 207342 | PULP/PAPER | | 0 | 124" Trim Fourdrinier Paper Machine. This machine has been Rebuilt in 2001 at a cost for upgrades of $15,000,000.00 USD. The entire wet end is all stainless steel and new in 2001.Basis Weight Range: 28-220 lbs/3000sq. ft. (45-355 GSM) This machine was designed to produce a wide range of paper, board and specialty products. The machine is available with or without the Rotoformer. Complete engineering documentation is available on site. This mill is immediately available and has been closed due to corporate consolidation.
Includes: Stock Preparation - (3) Hydrapulpers, S/S Drum Thickener, BC Hydraflaker, (2) Valmet/Metso Optifiner Mdl RF-1 Refiners , (1) BC Refiner Chemifiner Mdl D-50, Voith Sulzer Multiscreen S/S , GL&V Cleaner Mdl CLP-700-LD; Headbox Manufactured by Mecfab, All Stainless Steel, Hydraulic, Dilution Controlled with 134" Slice opening, (24) Auto-actuators; Forming Section inlcudes - GL&V Cantilever Fourdrinier with 41' Formation Table: (6) Foil forming board; (3) Vacuum foil boxes; (4) Gravity forming boxes' 24" Dia. Dandy roll, (4) Vacuum flat boxes, 139" x 24" Dia. Suction couch roll DF, 150" overall length, Voith wire shake control, Sandy Hill Top Rotoformer 2000, Stainless Steel, located over wet felt presses , Sheets meet at the felt going into the first press; Wet Presses include - (3) individual felted wet presses, 1st Press: 24" Dia. Suction bottom roll with blind drill top roll doctored, 2nd Press: Blind drill bottom roll with a bone hard top roll doctored, 3rd Press: Solid bottom roll with a blind drill top roll doctored (Entire wet end New in 2001.);
Dryer Section includes - (41) ASME Code Dryers for 75 PSI, 3 Sections- 1st (8); 2nd (23); 3rd (10), 134" x 48" Dia dryer cans with rope rings, Anti-Friction Bearings, JHK Systems, Inc. Dryer hood with individual pocket ventalation system (2001); Size Press includes - Inclined unit flooded nip, (1) Steel and (1) Rubber roll, Located between 3rd and 4th dryer sections, Latex /Coatings is applied to the sheet at this size press; Overhead Dryer - Spooner Flotation gas fired dryer built 2001, Located in between 2nd and 3rd Dryer Section; Calender Stacks include a Manchester 6 roll open frame wet calender stack, and a Farell 2-roll 1000 PLI Finishing stack, Swimming bottom roll Rebuilt 2001; Track Reel - Beloit horizontal 6' long track reel. Primary and secondary Arms; Slitter-Rewinder Rebuilt (2001), Beloit Two-drum slitter-rewinder, Shaftless Rewind for 72" 0.D. Rolls. Tidland MSP Modular Automatic Shear Slitting system. Rated for 4000 FPM. Roll Unloading Table. Rebuilt in 2001; Drive & Control Systems (2001) - Complete ABB AC Sectional drive, Circonix Process Management and Control system, Honeywell Proflow controler; Process Equipment: Complete Latex/Coatings processing system including bulk storage tanks; Installed in 2001. |
|
|
| 208818 | PULP/PAPER | | 150 | Krebs Hydra-clone liquid/solids seperator, model PC-1-1181, serial number 81153. Krebs Radial manifold system containing thirty (30) PCI-1181
cyclones with a 304 SS feed chamber. Feed chamber outlet size is 3/8", valves and unions for easy removal of Cyclones. Feed pipe size is 3" dia.
Overflow launder is 20" in diameter with a 6" discharge flange. Conical Underflow launder3/16"ss with a 4" outlet flange.
Support legs are carbon steel.
Cyclones are encased in ss housings. The inlet head is urethane, size.047" The cyclone body is urethane, size 1/8". |
|
|
| 208873 | PULP/PAPER | CONVERTING | | Azco Corporation Unwinder - designed for 10" wide web. |
|
|
| 208874 | PULP/PAPER | CONVERTING | 12 | Martin Automatic model MB-IRS unwinder. Serial number MB 212-5087-1, (2) spindle, from 6" to 12" wide web, with 31" maximum roll diameter, 300 lb, 6" core. Zero speed butt splice. |
|
|
| 208875 | PULP/PAPER | CONVERTING | 10 | Martin Automatic model MB-IRS unwinder. Serial number MB 112-5559-1, (2) spindle, from 6" to 10.5 wide web, with 31" maximum roll diameter, 450 lb, 6" core. Zero speed butt splice. |
|
|
| 208876 | PULP/PAPER | CONVERTING | 10 | Martin Automatic model MB-IRS unwinder. Serial number MB 112-5559-1, (2) spindle, from 6" to 10.5 wide web, with 31" maximum roll diameter, 450 lb, 6" core. Zero speed butt splice. |
|
|
| 208877 | PULP/PAPER | CONVERTING | 10 | Martin Automatic model MB-IRS unwinder. Serial number MB 112-5559-4, (2) spindle, from 6" to 10.5 wide web, with 31" maximum roll diameter, 450 lb, 6" core. Zero speed butt splice. |
|
|
| 208878 | PULP/PAPER | CONVERTING | 12 | Martin Automatic Rewinder with Intermec 3400 digital labler. Serial number RCHW112-5559-5. Up to 12" wide web, (2) spindle. Alan Bradly controls. |
| 76 Items Returned | Go To Page: | 1 | 2 | 3 | 4 |
|
|
|
|
|
|
|
|