|
|
|
|
|
|
|
Enter a product number or part of its description below...
OR
Now choose a product sub group (if any are present below)
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 1492 | PUMP | RECIPROCATING | 14 | 13.3 gpm (798gph), Manton Gaulin 304SS high pressure triplex pump. 50 HP motor, UL label for hazardous locations. W/gyrol fluid drive and Falk concentric speed reducer driving the pump. Pump rated for 5,000 psi. Type 750HPK112-5RAY, SN 1060-1273. |
|
|
| 2272 | PUMP | VACUUM | 600 | Nash Mdl L6 rotary water seal vac pump. Designed for 600 cfm @ 20" Hg. Take 50 HP motor. Appear to have been rebuilt, w/replacement bodies which do not have test numbers. Bare pump. |
|
|
| 3040 | PUMP | VACUUM | 3000 | H-11 Nash "Hytor" rotary water seal vac pump. Size HST11T. Designed for approx 3,000 cfm @ 20" Hg, 1,800 cfm @ 24" Hg. (Typical test numbers are 62-1029 and AD-5457.) "Bare pump". |
|
|
| 4208 | PUMP | CENTRIFUGAL | 200 | 200 gpm @ 2200' TDH, 3" x 1", 304SS Sundyne Mdl LMV331 vert centrifugal pump. SN 4580, 4581. Pump speed 13,600 rpm. Pumps have integral Sundyne speed increase, rated for 400 HP @ 3500 rpm input speed. No motor. |
|
|
| 4225 | PUMP | CENTRIFUGAL | 500 | 500 gpm @ 100'TDH, 4" x 3", Karbate centrifugal pump. Mfd by Union Carbide, Mdl #3-CA-9.5. Openings: top 1-3"; side 1-4". Driven by Allis Chalmers 30 HP, 360/440 volt, 1750 rpm TEFC motor, Frame #326U. On prefabricated CS base. |
|
|
| 4580 | PUMP | VACUUM | 760 | Nash Mdl H8 rotary water seal vac pump. Test #79U7279. Designed for 760 cfm @ 25" Hg. Takes 60 HP max. Bare pump. |
|
|
| 5419 | PUMP | VACUUM | 760 | Nash Hytor H-8 vacuum pump. Maximum rating 760 cfm @ 25" Hg. Takes 60 HP maximum. One test #5737. |
|
|
| 6722 | PUMP | CENTRIFUGAL | 5 | 5 gpm @ 200' TDH, 1 1/2" x 1 1/2", Sihi SS centrifugal self-priming pump. Mdl AOHA3101, SN BNO21424. No motor, takes 3 HP. |
|
|
| 6997 | PUMP | VACUUM | 400 | 400 cfm @ 15" Hg, Nash, CS vacuum pump, Model K-5. SN #Y-3716. 710 rpm. Takes 20 HP motor. |
|
|
| 8106 | PUMP | CENTRIFUGAL | 25 | UNUSED 2-1/4" x 2-1/4" Viking CS centrifugal pump, Model K-124R. On CS base. With 3/60/230/460 volt, 1160 rpm motor. Steel construction. |
|
|
| 8235 | PUMP | ROTARY | | SS Kinney Heliquid rotary pump. Coupled to Phila gear reducer, Size 6HLI, 72.9 HP rating, 1750 rpm input, ratio 4.13:1, output 424 rpm. Belt driven by approx 50 HP motor, Type A9898. SN 781444. |
|
|
| 8299 | PUMP | ROTARY | 50 | 6" inlet and outlet, SS Kinney Heliquad rotary pump. Type A8893, SN #1598-72 1655-73. With double packing glands. |
|
|
| 9449 | PUMP | CENTRIFUGAL | 13700 | 13,700 gpm, 1186' TDH. 14" x 12" Ingersoll Rand horizontal centrifugal pump. Model 12x19J, 3570 rpm. 19 1/4" impellor diameter. Single stage, double suction. Top suction and discharge. |
|
|
| 9561 | PUMP | ROTARY | 6 | 6 gpm @ 60 deg F., 6" inlet x 4" outlet 316 SS Robbins and Myers Moyno pump. Mdl. 5JK8-SSQ. Has pneumatic control adjustment. Direct varispeed drive 20 HP, 3/60/230/460 volt, 1800 rpm TEFC motor. Ratio 20.4:1, 27.5 minimum rpm, 165 maximum rpm. 12" x 26" x 31" chamber. Mounted on a 26" x 153" CS base. |
|
|
| 9588 | PUMP | CENTRIFUGAL | 20100 | UNUSED 20100 gpm @ 2549'TDH, CS, 20" x 20" steam driven feedwater pump and turbine drive. Manufactured by DeLaval, Centrifugal pump type 1BSX1520, Serial number 705960, rated 20100 GPM, 315 PSIG Suction pressure, 1246 PSIG @ 379 degrees F discharge. Pump is direct coupled w/flexible coupling to a Delaval horizontal, multi-stage, multi-valve, double flow, condensing steam turbines w/lube oil and control systems , including turning gear w/SS internals. Turbine Serial Number is 705958, Type LJDF, rated 26000 HP, 5400 rpm, Max. inlet steam is 90 PSIG @ 498 degrees F, Aux. inlet steam 883/1028 PSIG @ 536/500 degrees F, steam consumption 179800 lbs/hr. Pump and Turbine are mounted on a skid. OA Dimensions are 11' wide x 32' 6" long x 11.16' high. |
|
|
| 9801 | PUMP | ROTARY | 0 | 8" x 8", 316 SS Moyno pump body. No motor drive. |
|
|
| 10054 | PUMP | VACUUM | 675 | 675 cfm @ 25" Hg, CS Nash H-8 water seal vac pump. 576 rpm. Test #584179. Belt driven by 60 HP, General Electric 3/60/220/440 volt, 1770 rpm drip-proof motor, SN RR143028. Skid mtd. |
|
|
| 10401 | PUMP | VACUUM | 500 | 500 cfm @ 19" Hg, CS Nash L6 vac pump only. 680 rpm. Test #: AD3316, AD7217, 577755, AD11007, AD2096, AD6163, AD6162, AD5141, AD7218. |
|
|
| 10863 | PUMP | CENTRIFUGAL | 500 | 500 gpm @ 100' TDH. 4" x 3" Durco 316 SS centrifugal pump. -1: Model HHJ3WR00114, SN 75870; -2: HHJ3WR00130, SN 84924. SS jacket. 11 1/2" diameter open impellor. With mechanical seal. With 30 HP, 3/60/220/440 volt, 1800 rpm motor. |
|
|
| 10872 | PUMP | CENTRIFUGAL | 160 | 160 gpm, 2" x 1 1/2" Durco SS centrifugal pump. Model HHCD2WR0C94 SN 75863. SS jacket. With mechanical seal. Direct coupled to 7.5 HP, 3/60/220/440 volt, 1750 rpm TEFC motor. |
|
|
|
|
|
|
|
|