 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Feeders Feeders are designed to regulate or make uniform the flow of ingredients into a process from a bin or bulk hopper. Screw feeders such as Acrison, have a hopper that is agitated to prevent clumping, and a screw feeder to provide the uniform feed flow. Belt or apron feeders are conveyor belts that regulate the feed flow. Weigh belt feeds used weigh scales under the belt to regulate the ingredient addition to the process by weight. Pan feeders or vibratory feeders also provide a uniform flow into the process, however in this type of feeder the product is moved along by the vibration of the pan. Rotary feeders or star feeders are actually star valves, or rotary valves. The rpm of rotor inside the valve housing regulates the feed into the process.
|
|
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 14 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 19580 | FEEDER | ROTARY | | Rotary feed pump and hopper. Mfd by GUSA, Model SG1/17, SN 36432. Unit has 18" diameter x 17" straight side SS hopper with 12" cone bottom. Hopper feeds into SS rotary pump with 2" inlet and outlet. Pump driven by 2 HP, 3/60/230/460 volt adjustable speed drive. Mounted on stand. |
|
|
| 35984 | FEEDER | ROTARY | 8 | 8" x 8", 304SS rotary feeder valve. Top has 8" dia flange opening, 8" x 8" square discharge opening. Packing gland on shaft. |
|
|
| 49631 | FEEDER | ROTARY | 8 | 8" dia x 10" long 304SS rotary airlock valve. Mfd by Mikro-Airlock, SN 73A564. 8" inlet/outlet. |
|
|
| 71103 | FEEDER | ROTARY | 8 | 8" dia 316SS Mikropul rotary feeder valve. SN 62A1001. Has (6) blades w/teflon tips. Belt driven by 1/4 HP, 3/60/230/460 volt, 1750 rpm motor, UL label, thru Winsmith gear reducer, rated 24:1 ratio. Pulley ratio 2:1. |
|
|
| 76976 | FEEDER | ROTARY | 8 | 8" dia 304SS rotary feed valve. Mfd by Shick. 8-blade feed valve, driven by 1/2 HP, 3/60/230/460 volt, 1160 rpm motor, UL label, thru gear reducer. |
|
|
| 96616 | FEEDER | ROTARY | 12 | UNUSED 12" dia Sprout Waldron CS rotary feeder valve. SN R2-1046. Rated 100 psi @ 350 deg F. 16.17 rpm. 10" inlet, 10" outlet. Chain and sprocket driven. Has packing gland. Has Dazig speed switch. |
|
|
| 200799 | FEEDER | ROTARY | 10 | 10" diameter , 316SS, wetted parts,and all Body parts 316 SS. Rotary air Lock assembly, with hinged side access. 10" diameter straight through design. @" deeep recessed vanes (7) total. With mechanical seal on driven shaft end. Opposite end has hinged acess door for easy cleaning and removal of valve. Chain driven by a Magnatek (suitable for inverter use) .16-1 hp, 256-1765 rpm, 213TC frame. Motor drives chain through a Cyclo gear drive. Diameter of valve flange is 16". Flange face to face is 20" |
|
|
| 207055 | FEEDER | ROTARY | 0 | 9" 316SS Rotary Valve with drive motor and gearbox. Manufactured by Premier Pnuematics. |
|
|
| 207056 | FEEDER | ROTARY | 2 | 2" 316 SS Rotary Valve, Manufactured by The Young Industries.Serial # CA-8001, Model # CA HC SA, Driven by a US motor 1/2 HP, 1770 RPM motor rated for Hazardous locations. Unit mounted on a stainless steel base with ss drive guard, and side opening.G7 |
|
|
| 212038 | FEEDER | ROTARY | 8 | 8" diameter, c/steel portable rotary screw feeder, 45" long c/steel screw, driven by 3kw, 3/50/230-400 volt, 6.4 rpm geared motor, 224.43:1 ratio, top inlet w/feed shute, mounted on c/steel framework with (4) castor (wheels) |
|
|
| 212039 | FEEDER | ROTARY | 8 | 8" diameter, c/steel portable rotary screw feeder, 45" long c/steel screw, driven by 3kw, 3/50/230-400 volt, 6.4 rpm geared motor, 224.43:1 ratio, top inlet w/feed shute, mounted on c/steel framework with (4) castor (wheels) |
|
|
| 212040 | FEEDER | ROTARY | 8 | 8" diameter, c/steel portable rotary screw feeder, 45" long c/steel screw, driven by 3kw, 3/50/230-400 volt, 6.4 rpm geared motor, 224.43:1 ratio, top inlet w/feed shute, mounted on c/steel framework with (4) castor (wheels) |
|
|
| 212041 | FEEDER | ROTARY | 8 | 8" diameter, c/steel portable rotary screw feeder, 45" long c/steel screw, driven by 3kw, 3/50/230-400 volt, 6.4 rpm geared motor, 224.43:1 ratio, top inlet w/feed shute, mounted on c/steel framework with (4) castor (wheels) |
|
|
| 705921 | FEEDER | ROTARY | 86 | Eirich type UE 62 c/steel rotary disc feed table, serial # 15796, rotating table 2200mm diameter, scraper type agitator driven by 1.5 kw, 3/50/380 volt geared motor, scrapper speed approx 5.2 rpm, (2) discharge gates, mounted on c/steel frame |
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|