 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Feeders Feeders are designed to regulate or make uniform the flow of ingredients into a process from a bin or bulk hopper. Screw feeders such as Acrison, have a hopper that is agitated to prevent clumping, and a screw feeder to provide the uniform feed flow. Belt or apron feeders are conveyor belts that regulate the feed flow. Weigh belt feeds used weigh scales under the belt to regulate the ingredient addition to the process by weight. Pan feeders or vibratory feeders also provide a uniform flow into the process, however in this type of feeder the product is moved along by the vibration of the pan. Rotary feeders or star feeders are actually star valves, or rotary valves. The rpm of rotor inside the valve housing regulates the feed into the process.
|
|
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 17 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 16831 | FEEDER | SCREW | 2 | 2" dia CS Vibra screw feeder. Mdl 7-24. Variable speed drive 16.6 to 166 rpm. With 1/2 HP, 3/60/460 volt motor. |
|
|
| 38856 | FEEDER | SCREW | 18 | 18" x 24" x 18" deep 304SS screw feeder. Has delumper bar. Unit is chain and sprocket driven by 1/2 HP, 3/60/230/460 volt, 12 rpm min, 208 rpm max variable speed motor. Has additional product bin 20" x 20" x 18" deep w/capacitance probe. All driven by same drive. |
|
|
| 73800 | FEEDER | SCREW | 10 | 10" dia 304SS screw feeder. 36" x 33" feed hopper. 10" dia x 4' long discharge screw. 8" x 8" discharge. Driven by 3/4 HP, 3/60/208/230 volt, 1725 rpm motor. Mtd on stand. |
|
|
| 85404 | FEEDER | SCREW | 1 | 1" x 8" long 316SS Gericke feed screw w/hopper. SN 34694. Driven by 0.13 KW varidrive, 3/50/220/380 volt, 2800 rpm. W/8" x 12" 316SS hopper. On unitized base. |
|
|
| 201312 | FEEDER | SCREW | 3 | 3" diameter 304 stainless steel Vibra screw feeder. Mounted on steel base. Driven by Synerogear motor 3 HP 3/60/230/460V, 1735 RPM motor, deisgn B code K. |
|
|
| 202691 | FEEDER | SCREW | | big bag filling line consisting of a feeder hopper with two internal lump breakers driven each by 3.0 kW /50/380V 1450 RPM motors. with Gericke screw feeder driven by 1.1 kW 3/50/380V variable speed drive unit. digital scale manufactured by Precia type TAS1 21 |
|
|
| 203089 | FEEDER | SCREW | 48 | Unused 304 SS twin screw feed with screw conveyor. Manufactured by Acrison Type BDF 4 1-1/2, Serial number 00276-01. Feed bin is 48" x 48" with twin screws discharging into a 10" diameter X 8' long screw conveyor. Twin screws drive by Leason 3/4HP motors and reducers, conveyor driven by approximately 10 HP motor. Designed for feed rates of 0.58 to 3400 cu.ft./hour.Designed for 48" round inlet hopper(not Included), discharge into 14" round opening. |
|
|
| 207936 | FEEDER | SCREW | 0 | 304SS, Acrison volumetric feeder, with SS hopper and 2.5 " diameter screw discharge. Belt driven. |
|
|
| 207941 | FEEDER | SCREW | | 304SS, Acrison volumetric feeder, with SS hopper and 2.5 " diameter screw discharge. Belt drive |
|
|
| 210320 | FEEDER | SCREW | 2 | Perfill volumetric feeder Model PF-MRI, Serial Number 10033, 1 phase, 120 Volt 10 amp. With SS hopper. Mounted on a stand with wheels. Controls for Stop & Start filling cycle, fill quanity with precision counter that controls the amount of product dispensed and the batch size.The speed of the auger is regulated by a seperate control. |
|
|
| 210363 | FEEDER | SCREW | 2 | Per-fill volumetric feeder Model PF-MR 1, Serial Number 10033, 1 phase, 120 Volt 10 amp. With SS hopper. Mounted on a stand with wheels. Controls for Stop & Start filling cycle, fill quanity with precision counter that controls the amount of product dispensed and the batch size.The speed of the auger is regulated by a seperate control. |
|
|
| 211804 | FEEDER | SCREW | 0 | 316 s/steel double dosing screw, type K2-MV-T-35-H, mfd by K-Tron Soder AG, switzerland with Loher E-Motor and frequency inverter. |
|
|
| 705922 | FEEDER | SCREW | 1 | 304 s/steel Rospen type BW-L-ON-7754 loss-in-weight feeder, with hopper, serial # 2646, manufactured by Rospen Industries Ltd, 304 s/steel (highly polished) main chamber with: 50mm diameter outlet, (1) 25mm diameter x 520mm long 304 s/steel (highly polished) screw, driven by 2-speed motor, 0.37 kw, 3/50/400 volt, 2730 rpm or 0.39 kw, 3/60/460 volt, 3330 rpm, packed gland, (1) 304 s/steel (highly polished) product conditioner/mixer, driven by 2-speed motor, 0.37 kw, 3/50/400 volt, 2730 rpm or 0.39 kw, 3/60/460 volt, 3330 rpm, packed gland,
unit mounted on weigh cell,
0.276m3 hopper capacity (approx 90-100 kg) 304 s/steel feed hopper bolted on top of main chamber,
the loss-in-weigh-feeder is designed to weigh and control the output of variable products continuously to weight accuracies of +/- 0.25% to +/- 1%. |
|
|
| 705923 | FEEDER | SCREW | 1 | 304 s/steel Rospen type BW-L-ON-7754 loss-in-weight feeder, with hopper, serial # 2648, manufactured by Rospen Industries Ltd, 304 s/steel (highly polished) main chamber with: 50mm diameter outlet, (1) 35mm diameter x 520mm long 304 s/steel (highly polished) screw, driven by 2-speed motor, 0.37 kw, 3/50/400 volt, 2730 rpm or 0.39 kw, 3/60/460 volt, 3330 rpm, packed gland, (1) 304 s/steel (highly polished) product conditioner/mixer, driven by 2-speed motor, 0.37 kw, 3/50/400 volt, 2730 rpm or 0.39 kw, 3/60/460 volt, 3330 rpm, packed gland,
unit mounted on weigh cell,
m3 hopper capacity (approx 90-100 kg) 304 s/steel feed hopper bolted on top of main chamber,
the loss-in-weigh-feeder is designed to weigh and control the output of variable products continuously to weight accuracies of +/- 0.25% to +/- 1%. |
|
|
| 705924 | FEEDER | SCREW | 1 | 304 s/steel Rospen type BW-L-ON-7754 loss-in-weight feeder, with hopper, serial # 2645, manufactured by Rospen Industries Ltd, 304 s/steel (highly polished) main chamber with: 50mm diameter outlet, (1) 25mm diameter x 600mm long 304 s/steel (highly polished) screw, driven by 2-speed motor, 0.37 kw, 3/50/400 volt, 2730 rpm or 0.39 kw, 3/60/460 volt, 3330 rpm, packed gland, (1) 304 s/steel (highly polished) product conditioner/mixer, driven by 2-speed motor, 0.37 kw, 3/50/400 volt, 2730 rpm or 0.39 kw, 3/60/460 volt, 3330 rpm, packed gland,
unit mounted on weigh cell,
approx 90-100 kg capacity 304 s/steel feed hopper bolted on top of main chamber,
the loss-in-weigh-feeder is designed to weigh and control the output of variable products continuously to weight accuracies of +/- 0.25% to +/- 1%.
|
|
|
| 705925 | FEEDER | SCREW | 1 | 304 s/steel Rospen type BW-L-ON-7754 loss-in-weight feeder, with hopper, serial # 2647, manufactured by Rospen Industries Ltd, 304 s/steel (highly polished) main chamber with: 50mm diameter outlet, (1) 25mm diameter x 600mm long 304 s/steel (highly polished) screw, driven by 2-speed motor, 0.37 kw, 3/50/400 volt, 2730 rpm or 0.39 kw, 3/60/460 volt, 3330 rpm, packed gland, (1) 304 s/steel (highly polished) product conditioner/mixer, driven by 2-speed motor, 0.37 kw, 3/50/400 volt, 2730 rpm or 0.39 kw, 3/60/460 volt, 3330 rpm, packed gland,
unit mounted on weigh cell,
approx 90-100 kg capacity 304 s/steel feed hopper bolted on top of main chamber,
the loss-in-weigh-feeder is designed to weigh and control the output of variable products continuously to weight accuracies of +/- 0.25% to +/- 1%.
|
|
|
| 706281 | FEEDER | SCREW | 4 | 112mm diameter 304 s/steel screw feeder with hopper, 112mm diameter x 1900mm long screw, driven by 2-speed motor, 0.75 kw, 3/50/380-420/220-240 volt, 1400 rpm or 0.90 kw, 3/60/440-480/250-280 volt, 1690 rpm, hopper 750mm x 750mm x 725mm deep, chamber also has lump breaker, shaft driven by same motor as the screw,
openings top 1-300 mm (feed), 1-200mm (with bursting disc), discharge 1-125mm. |
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|