 |
Register Login |
 |
|
 |
- Home
- About Us
- Equipment Search
- Plant Search
- Industrial Real Estate
- Bromborough, England
- Bloomsbury, New Jersey
- Coventry, Rhode Island
- Fitchburg, Massachusetts
- Florence, South Carolina
- Liverpool, England
- Lowell, North Carolina
- Niagra Falls, New York
- Penuelas, Puerto Rico
- University Park, Illinois
- Sell to IPP
- News
- Media
- Contact Us
|
|
 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Feeders Feeders are designed to regulate or make uniform the flow of ingredients into a process from a bin or bulk hopper. Screw feeders such as Acrison, have a hopper that is agitated to prevent clumping, and a screw feeder to provide the uniform feed flow. Belt or apron feeders are conveyor belts that regulate the feed flow. Weigh belt feeds used weigh scales under the belt to regulate the ingredient addition to the process by weight. Pan feeders or vibratory feeders also provide a uniform flow into the process, however in this type of feeder the product is moved along by the vibration of the pan. Rotary feeders or star feeders are actually star valves, or rotary valves. The rpm of rotor inside the valve housing regulates the feed into the process.
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
| 54 Items Returned | Go To Page: | 1 | 2 | 3 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 14769 | FEEDER | PAN | 24 | 24" dia x 24" deep, 304SS Com-bin feeder. Mfd. by Pulva Corp, SN CB1579. Missing drive. |
|
|
| 16831 | FEEDER | SCREW | 2 | 2" dia CS Vibra screw feeder. Mdl 7-24. Variable speed drive 16.6 to 166 rpm. With 1/2 HP, 3/60/460 volt motor. |
|
|
| 19580 | FEEDER | ROTARY | | Rotary feed pump and hopper. Mfd by GUSA, Model SG1/17, SN 36432. Unit has 18" diameter x 17" straight side SS hopper with 12" cone bottom. Hopper feeds into SS rotary pump with 2" inlet and outlet. Pump driven by 2 HP, 3/60/230/460 volt adjustable speed drive. Mounted on stand. |
|
|
| 24161 | FEEDER | VIBRATING | | Syntron vibratory parts feeder. Unit mtd on Syntron vibratory parts feeder base w/Syntron electronic controller and timer. Unit moves parts up a spiral perforated conveyor. 304 SS chamber 24" dia x 30" high. Heating elements mtd on top of conveying chamber for drying. Unit has static eliminator (mfd by Simco) and liquid feed hopper. |
|
|
| 28999 | FEEDER | PAN | 60 | 60" dia x 40" str side, 304SS Com bin feeder. Mdl CB2132. Rotating btm driven by 2 HP, 1750 rpm, 185 A volts, DC. |
|
|
| 35984 | FEEDER | ROTARY | 8 | 8" x 8", 304SS rotary feeder valve. Top has 8" dia flange opening, 8" x 8" square discharge opening. Packing gland on shaft. |
|
|
| 37101 | FEEDER | PAN | 60 | 60" dia x 40" str side, 304SS Com bin feeder. Mdl CB2131. Unit has rotating btm driven by 2 HP, 1750 rpm, 185 A volts DC. |
|
|
| 37102 | FEEDER | PAN | 60 | 60" dia x 40" str side, 304SS Com bin feeder. Mdl CB2132. Rotating btm driven by 2 HP, 1750 rpm, 185 A volts, DC. |
|
|
| 38856 | FEEDER | SCREW | 18 | 18" x 24" x 18" deep 304SS screw feeder. Has delumper bar. Unit is chain and sprocket driven by 1/2 HP, 3/60/230/460 volt, 12 rpm min, 208 rpm max variable speed motor. Has additional product bin 20" x 20" x 18" deep w/capacitance probe. All driven by same drive. |
|
|
| 49631 | FEEDER | ROTARY | 8 | 8" dia x 10" long 304SS rotary airlock valve. Mfd by Mikro-Airlock, SN 73A564. 8" inlet/outlet. |
|
|
| 71103 | FEEDER | ROTARY | 8 | 8" dia 316SS Mikropul rotary feeder valve. SN 62A1001. Has (6) blades w/teflon tips. Belt driven by 1/4 HP, 3/60/230/460 volt, 1750 rpm motor, UL label, thru Winsmith gear reducer, rated 24:1 ratio. Pulley ratio 2:1. |
|
|
| 73800 | FEEDER | SCREW | 10 | 10" dia 304SS screw feeder. 36" x 33" feed hopper. 10" dia x 4' long discharge screw. 8" x 8" discharge. Driven by 3/4 HP, 3/60/208/230 volt, 1725 rpm motor. Mtd on stand. |
|
|
| 76976 | FEEDER | ROTARY | 8 | 8" dia 304SS rotary feed valve. Mfd by Shick. 8-blade feed valve, driven by 1/2 HP, 3/60/230/460 volt, 1160 rpm motor, UL label, thru gear reducer. |
|
|
| 85404 | FEEDER | SCREW | 1 | 1" x 8" long 316SS Gericke feed screw w/hopper. SN 34694. Driven by 0.13 KW varidrive, 3/50/220/380 volt, 2800 rpm. W/8" x 12" 316SS hopper. On unitized base. |
|
|
| 96616 | FEEDER | ROTARY | 12 | UNUSED 12" dia Sprout Waldron CS rotary feeder valve. SN R2-1046. Rated 100 psi @ 350 deg F. 16.17 rpm. 10" inlet, 10" outlet. Chain and sprocket driven. Has packing gland. Has Dazig speed switch. |
|
|
| 96801 | FEEDER | | | UNUSED 52,000 lbs/hr Schenk CS weigh scale belt feeder. SN DM1205. Belt rate 43.86 ft/min. Driven by (2) 1.5 HP motors. Outside dimensions 142" x 72" x 60". |
|
|
| 200799 | FEEDER | ROTARY | 10 | 10" diameter , 316SS, wetted parts,and all Body parts 316 SS. Rotary air Lock assembly, with hinged side access. 10" diameter straight through design. @" deeep recessed vanes (7) total. With mechanical seal on driven shaft end. Opposite end has hinged acess door for easy cleaning and removal of valve. Chain driven by a Magnatek (suitable for inverter use) .16-1 hp, 256-1765 rpm, 213TC frame. Motor drives chain through a Cyclo gear drive. Diameter of valve flange is 16". Flange face to face is 20" |
|
|
| 201312 | FEEDER | SCREW | 3 | 3" diameter 304 stainless steel Vibra screw feeder. Mounted on steel base. Driven by Synerogear motor 3 HP 3/60/230/460V, 1735 RPM motor, deisgn B code K. |
|
|
| 202691 | FEEDER | SCREW | | big bag filling line consisting of a feeder hopper with two internal lump breakers driven each by 3.0 kW /50/380V 1450 RPM motors. with Gericke screw feeder driven by 1.1 kW 3/50/380V variable speed drive unit. digital scale manufactured by Precia type TAS1 21 |
|
|
| 203089 | FEEDER | SCREW | 48 | Unused 304 SS twin screw feed with screw conveyor. Manufactured by Acrison Type BDF 4 1-1/2, Serial number 00276-01. Feed bin is 48" x 48" with twin screws discharging into a 10" diameter X 8' long screw conveyor. Twin screws drive by Leason 3/4HP motors and reducers, conveyor driven by approximately 10 HP motor. Designed for feed rates of 0.58 to 3400 cu.ft./hour.Designed for 48" round inlet hopper(not Included), discharge into 14" round opening. |
| 54 Items Returned | Go To Page: | 1 | 2 | 3 |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|
|
|
Home | About Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | News | Media | Contact Us
|
Copyright 2002-2010 International Process Plants
Terms Of Use
Privacy Statement
 
|
|
 |