RegisterLogin

Sell Your Equipment

Have surplus or idled equipment assets? Turn them into cash you can use to help your business by selling to IPP.

Learn About IPP's Purchase Capabilities

See Specific Plants & Equipment We are Looking to Buy

Need Help? or
Have something for sale? USE THIS FORM:
  

Featured Equipment
Equipment Rotator image
Equipment Rotator image 1 of 10 Equipment Rotator imageEquipment Rotator imageEquipment Rotator image
211011
Model D36, 316SS Podbielniak centrifuge, Manufactured by APV, Model D36, Serial number P53C01406, Job # 106-101. Bowl is 38" OD x 39" Long. Hinged 304SS cover, CS coated bottom housing. Unit has a 2"
Read More...
 
  

 

Used Filters

Used Filters - Processing Plant Equipment Filtration is the separation of a fluid-solids solution involving the passing of this mixture through a porous barrier which retains most of the solid particulates contained in the mixture. The various terms used in filtration processes include: Media – the filtration cloth or barrier to collect the solids, Liquor – the solution containing the liquid and solids, Filtrate – the liquid that has been filtered clear, Cake – the solids filtered out of the liquid, Polishing – the removal of the last bit of solids for a finished liquid product, Washing – pumping water or a wash liquid over the cake, Pre-coat – coating the filter cloth with a material like diatomaceous earth to aid in the filtering.

The liquor is either pushed through the filter under pressure or pulled through the filter under vacuum. The types and configurations of filters vary widely; each has its own method of filtering, its own method of discharging the filtrate and discharging the cake. Depending on the product, sometimes the filtrate is the desired product and other time the cake is the desired product.

Filters are measured by the square foot surface area available for filtering, and the cubic foot cake capacity.

Type of Filters:

  • Plate and Frame Filter Press – this is an assembly of plates covered with a filter cloth and frames designed to collect the cake, held together in a press with that has a head plate and tail plate – the press is closed by a hydraulic pump, or manually in small presses. The plates and frame can be made of many types of materials, polypropylene is popular. Many times the press has “recessed plates” where two plates form a cavity for collecting cake eliminating the frame. Filter presses must be opened and the plates separated to remove the cake.
  • Pressure Filters – These are batch filters that push the liquor through the filter under pressure. Once the cake capacity is reached the cake must be removed before you continue the process. All pressure filters consist of a vessel with internal filter plates or cloths.
    • Basket, Candle, & Cartridge filters - This type of filter has a tank with an internal basket with a cloth bag, or filter cartridges, mounted inside the tank.
    • Vertical Tank with Horizontal plate filters - Once the plates are full of cake the cake must be removed. In smaller filters like a Sparkler filter, the plate bundle is remove manually, in larger filters like a Shenk or Funda filter the plate bundle is rotated at a high rpm to use centrifugal force to throw the cake off the plates and remove cake from the bottom of the tank.
    • Horizontal Tank Vertical plate filters – the cake can be removed by shaking the plates, spraying the plates with high pressure water, or scraping the cake off as the plate bundle rotates.
  • Vacuum filters – These include rotary drum filters and horizontal belt filters. Both are continuous operations.
    • Rotary Drum filters – these are horizontal drums with perforated exteriors covered with a filter cloth and internal vacuum pipes that are designed to be partially submerged in a trough of liquor. The internal vacuum pipes create suction on the outside of the drum. As the drum rotates the liquor is pulled through the filtrate cloth and the cake is form on the outside of the drum. Before the cake dips back into the trough it is removed from the drum by a scraper or belt discharge.
    • Horizontal Belt filters – The liquor is spread onto one end of a horizontal perforated belt covered with a filter cloth. A vacuum is pulled under the belt creating suction on top. As the product is conveyed along the moving belt the filtrate is pulled through the belt perforations, leaving the cake on top. When the cake reached the end of the belt it basically drop off or is scrapped off the filter cloth.
    • Pan filters – Like a belt filter with a moving filter cloth and suction underneath, this filter replaces the belt with a series of vacuum pans that extract the filtrate while the cake is conveyed along the filter cloth.
  • Rosenmund Type – The major manufacturers of this type of filter are Cogiem and Rosenmund. Also known as Filter/Dryers and Nutche filters. This type of filter is typically pressure and vacuum rated internally, heated with a jacket, and has an agitation system that double as a cake discharge screw, and for added drying, the shaft of the agitator can be cored for heating and cooling. Depending on the process this type of filter can take the place of a reactor, a filter, and a dryer, all in one machine. The basic design is a large diameter tank, with a screen in the bottom head, top mounted agitator drive that can raise and lower the internal blades during different cycles. When the process is finished the agitator is lowered to scrape along the filter screen, a cake discharge valve is opened, the agitator scrapes the cake out of the filter/dryer. The newer machines have a removable bottom head so the filter screens can be removed and the bottom head cleaned without any type of tank entry. Filter/dryers are measured by the Square Meter of filter screen area.
  • Tower Filters – Similar to a filter press in filtration techniques. The tower press has horizontal plates with a continuous cloth woven in and out of the plates. During filtration the plate stack is closed and during discharge the plate stack is opened and the cake is conveyed out of the pres by the filter cloth. Eliminates the manual labor use to clean filter presses.

IPP carries an extensive inventory of used, unused and reconditioned filters in stock including filters manufactured by: 3-L, 3V COGEIM, Acme, ACME INDUSTRIAL, Alar, Alar Auto, Alar Engineering, Allegheny Bradford, Alsop, AMERICAN FILTER, AMETEK, AMF, Amicon, Andritz, Apache, APV, Ashbrook, Aurora, AURORA FILTERS, Avery, BAEUERLE & MORRIS, BAEUERLE & MORRIS INC, Baeurle & Morris, BALSTON FILTER, BIRD, BIRD YOUNG, Cambridge, CARLSON, Carter Day, Chemap AG Funda, Chemap Ltd, CHICAGO BOILER, Chicago Boiler Co., Choquenet, Clow, Cogeim, COGEIM SPA, Comber, COMER, Commercial, Commercial Filter Corporation, COMMERCIAL FILTERS, COMMERCIAL FILTERS CORPORATION, CP 1200 F, CULTER, CUNO, CUNO/MARTIN PETERSON, CUTLER METAL PRODUCT, DELAVAL, Dorr Oliver, Durco, DURCO ENZINGER, Durco/Enzinger, Durion, Duriron, Edward & Jones, Eimco, ENVIRONMENTAL TECH, Enviroquip, Ertel, ERTEL/ALSOP, EUROFILTEC, Extract Technology, Filler Specialties, Filter Specialists, Filterdyne, Filterite, FILTRATEC, Filtration & Separat, Filtration & Separation, Filtration Eng., Filtration Engineers, Filtration Systems, Filtroba AG, Filtrox-Werk, Flexline, Flow Trend, FRANTZ FERRO, FSI, Fulflo, GAF, GELMAN SCIENCES, GENERAL FILTRATION, Guedu, Harmsco, Haward, Hercules, HERCULES FILTER, Hoechst, HOESCHT, Hovex-Holland, Ideal Welders Ltd, Idrex, IMECA, Industrial, Industrial Filter, International, Jaygo, JWI, Ketema, KETEMA NIAGARA, KLAMPRESS 8/90, Klein, Komline Sanderson, Lanco, Larox, Larox-Pannevis, Lee Ind, LEE INDUSTRIES, LS10-BO-6, MECHANICAL FILTRATION, MEMTEC, Met-Chem, Millipore, Netzsch, Niagara, NIAGRA, Nivoba, Northland, NORTHLAND STAINLESS, NUTSCHE, Oberlin, OPF 4, OPF-12, OPF-4, Padovan, Padovan Taylo, Pall Corp, PALL TRINITY, Pannevis, Parker, PARKER HANNIFIN, PARKER/FULFLO FILTER, Parkson, Passavant, Perrin, Powder Systems, POWDER SYSTEMS LTD, Pressofiltro, Quantum Technologies, Romicon, Ronningen, RONNINGEN PETTER, RONNINGEN-PETTER, RONNING-PETTER, Rosedale, ROSEDALE PRODUCTS, ROSENMUND, RP Products, RT 0575, RUSSELL FINES, Russell Finex, Saltec, Sartorius, SARTORIUS STEDIM, Schenk, Seitz, SEITZ ENZINGER, Seitz Orion, Seitz Wega, Sernagiotto, Shriver, Sietz, Sietz Enzinger Noll, SLF Inc, SPARKLER, Sparkler Filter, SPARKLER FILTERS, Sperry, Standard, Star, Star Systems, Steri Technologies, Stossier, STRAINRITE, Strainrite Inc, STRAINRITE INC., Strassburger, Sweco, T. SHRIVER & CO. INC, Technical Fabricator, Thompson, Trent, TRI-CLOVER, Triton, US Filter, USF Filtration, Valex, Velo, Vernay, Vevey, Von, Von Roll, Waterlink Lanco, Westech, WESTECH ENGINEERING, William Sprinkman, WWE, Yabuta, Zurn, ZURN INDUSTRIES, Zwag .

Equipment Search

IPPE Used Process Equipment Search


Enter a product number or part of its description below and click SEARCH
  Search View Quote Contents


Finally, you may filter the results based on capacity below

    Narrow Results by Capacity

Add Checked to Quote
 Add to Quote Before Changing Page

32 Items ReturnedGo To Page: 12
  Stock NumberProductSub GroupCapacityDescription
Details
IPP Equipment Search Image 15330FILTERNUTSCHE3636" diameter x 10" straight side, 304 SS Nutsche type vacuum filter. Hemi-bolted top, hemi-bottom. Mfd by B-H Hubbert & Son, SN 26189. 304 SS jacket, jacket pressure 15 psi. Has removable SS perforated plate 10" deep in filter. Openings: top 2-3" sight glass, 1-3" center; bottom 1-2" center outlet. (4) legs.
Details
IPP Equipment Search Image 29004FILTERNUTSCHE3030" dia x 10" str side, 304SS vert Nutsche filter. Bolt dish btm, dish hinged cover w/counterweight. Cover has swing bolt closure. Openings: top 2-3/4", 2-3" sight glasses; 1-1" center btm outlet. Mtd on (3) legs.
Details
IPP Equipment Search Image 36659FILTERNUTSCHE3030" dia x 8" str side 304ELC SS Nustche filter. Openings: top 2-1"; btm 1-2".
Details
IPP Equipment Search Image 72805FILTERNUTSCHE605' dia x 12" str side, 304SS Nutsche filter. Has dish btm, open top. SS perforated filter plate. 2" center btm outlet. Mtd on (4) legs.
Details
IPP Equipment Search Image 89418FILTERNUTSCHE595.5 sq meter glass lined jacketed pressure filter. Shell manufactured by BHS, SN 329063. Glass lining by Pfaudler, SN 90739. Glass #8000. W/single filter plate. Filter Type TDF-10/10. Internal rated 6 bar and full vac; jacket rated 6 bar. 1200mm dia x 550mm str side 500mm conical section. Feed has 2-50mm w/(2) vibratory feeders. Top has additional 4-100mm nozzles. Btm discharge is 500mm. Filter top is clamped. Mtd on steel frame 3000mm long x 1500mm wide x 1500mm high.
Details
IPP Equipment Search Image 89955FILTERNUTSCHE66 sq meter 316SS agitated Nutsche filter. Mfd by Von Roll (Switzerland), SN 1246. 2800mm dia x 500mm deep. Side discharge 500mm dia. Raker driven by 6 PS, 3/50/500 volt, 1480 rpm motor, output speed 21.5/8.06 rpm. W/Von Roll Type PLR65 gear reducer. Hydraulic lift driven by 0.3 KW, 3/50/500 volt motor. W/(2) polypropylene hinged covers. (2) 100mm dia fluid nozzles, 1-100mm center btm outlet.
Details
IPP Equipment Search Image 91342FILTERNUTSCHE2222" dia x 16", SS vac Nutsche filter. Mtd on (4) legs.
Details
IPP Equipment Search Image 91359FILTERNUTSCHE1212" dia x 16", SS vac Nutsche filter. Mfd by Siterville, NB #3102.
Details
IPP Equipment Search Image 91366FILTERNUTSCHE2020" dia x 16", 316SS vac Nutsche filter. U-stamp. Int rated 60 psi @ 200 deg F, jkt rated 80 psi @ 350 deg F. 304SS jkt. Mtd on (4) legs.
Details
IPP Equipment Search Image 100624FILTERNUTSCHE3535" (900mm) dia x 20" (500mm) deep, 316SS jkt Nutsche filter. Top head movable w/davit. Top load/unload design. Openings: jkt 3-1 1/4" (31mm). Mtd on (4) lugs.
Details
IPP Equipment Search Image 107498FILTERNUTSCHE24600mm diameter all 1.4571 jacketed pressure Nutsche filter. Manufactured by Seitz (Germany), Type 60/1, Serial #3003. Internal rated 3 bar, pipe coil jacket rated 6 bar. Openings: top 2-12mm, 1-10mm; jacket 2-25mm; bottom plate head 1-25mm. Filter tank 600mm diameter x 450mm deep. Filter mounted on steel base with casters.
Details
IPP Equipment Search Image 108672FILTERNUTSCHE24600mm dia. glass lined jacketed pressure nutsch filter. 0.25 square meter filter area. Manufactured by: Lampart (Hungary), Type SB-M, built 1996. Rated 3 bar internal, 6 bar on jacket @ 0 - 200C. Top openings: 1 - 100mm, 1 - 25mm. Side opening: 2 - 25mm. Bottom opening: 1 - 100mm center bottom outlet, 1 - 25mm. Overall filter height 820mm. Mounted on stand 1100mmw x 1300mml x 2000mm high. Total filter volume 150 liter.
Details
IPP Equipment Search Image 203436FILTERNUTSCHE4210 square foot 304SS Duiron pressure nutche filter, 48" diameter X 18" on the straight side. Manufactured by Duriron Enzinger, National Board number 1648S, SO# E 12898, rated 75 psi @ 300 degrees F internal; 20 psi @ 300 degrees F in the CS jacket. Unit has a clamp dished top, welded dished bottom. Filter plate in bottom head. Top head is mounted on a davit with a manual hand crank for lifting and moving top head for cake removal.
Details
IPP Equipment Search Image 204026FILTERNUTSCHE36Model 36 SPEC, 316SS Sparkler jacketed, single plate pressure filter/nutsch filter. Serial number 21249, Rated 60 PSI @ 350 degrees F internal, 14.5 PSI @ 350 degrees F in the jacket. 36" diameter tank, Bolted dished top, 0.187" thick side walls, 0.187" thick CS jacket. Opeingns include: Top - (2) 8" SG, (2) 2", (1) 1/2"; Bottom (1) 1.5". Mounted on 4 legs.
Details
IPP Equipment Search Image 208322FILTERNUTSCHE390,85 m² 316Ti s/steel (1.4572) jacketed Seitz pressure filter, type EF-100.300-CW, serial #12177, 1 m diameter,clamped flat bottom, internal pressure 6 bar @ 165°C, 330 ltr volume, c/steel jacket 6 bar @ 165°C, 35 ltr volume, raise/lower mechanism, max lifting 200 mm, mounted on a steel frame
Details
IPP Equipment Search Image 209886FILTERNUTSCHE1149'6" inside length x 4'6" inside width x 2'6" deep c/steel/resin lined vacuumn nutsche filter, internal design pressure 0.8 kg/cm2 + full vac @ -10/+70 deg C, operating pressure 0.136/0.5 kg/cm2 @ 0-20 deg C, 304 s/steel internal filter mesh, GRP hood with pneumatic ram assisted open/close mechanism, openings: hood 1,12", 2-2", 1 end with 1-3", 1-2", 1 end with 2-2", mounted on (6) c/steel legs, filter with (1) s/steel centrifugal pump, (1) s/steel 2-stage vacuumn pump, driven by 11kw, 3/50/415 volt, 1450 rpm motor, (1) s/steel vacuumn pot.
Details
IPP Equipment Search Image 209887FILTERNUTSCHE1149'6" inside length x 4'6" inside width x 2'6" deep c/steel/resin lined vacuumn nutsche filter, internal design pressure 0.8 kg/cm2 + full vac @ -10/+70 deg C, operating pressure 0.136/0.5 kg/cm2 @ 0-20 deg C, 304 s/steel internal filter mesh, GRP hood with pneumatic ram assisted open/close mechanism, openings: hood 1,12", 2-2", 1 end with 1-3", 1-2", 1 end with 2-2", mounted on (6) c/steel legs, filter with (1) s/steel centrifugal pump, (1) s/steel 2-stage vacuumn pump, driven by 11kw, 3/50/415 volt, 1450 rpm motor, (1) s/steel vacuumn pot.
Details
IPP Equipment Search Image 209888FILTERNUTSCHE1149'6" inside length x 4'6" inside width x 2'6" deep c/steel/resin lined vacuumn nutsche filter, internal design pressure 0.8 kg/cm2 + full vac @ -10/+70 deg C, operating pressure 0.136/0.5 kg/cm2 @ 0-20 deg C, 304 s/steel internal filter mesh, GRP hood with pneumatic ram assisted open/close mechanism, openings: hood 1,12", 2-2", 1 end with 1-3", 1-2", 1 end with 2-2", mounted on (6) c/steel legs, filter with (1) s/steel centrifugal pump, (1) s/steel 2-stage vacuumn pump, driven by 11kw, 3/50/415 volt, 1450 rpm motor, (1) s/steel vacuumn pot.
Details
IPP Equipment Search Image 209889FILTERNUTSCHE1149'6" inside length x 4'6" inside width x 2'6" deep c/steel/resin lined vacuumn nutsche filter, internal design pressure 0.8 kg/cm2 + full vac @ -10/+70 deg C, operating pressure 0.136/0.5 kg/cm2 @ 0-20 deg C, 304 s/steel internal filter mesh, GRP hood with pneumatic ram assisted open/close mechanism, openings: hood 1,12", 2-2", 1 end with 1-3", 1-2", 1 end with 2-2", mounted on (6) c/steel legs, filter with (1) s/steel centrifugal pump, (1) s/steel 2-stage vacuumn pump, driven by 11kw, 3/50/415 volt, 1450 rpm motor, (1) s/steel vacuumn pot.
Details
IPP Equipment Search Image 209890FILTERNUTSCHE1149'6" inside length x 4'6" inside width x 2'6" deep c/steel/resin lined vacuumn nutsche filter, internal design pressure 0.8 kg/cm2 + full vac @ -10/+70 deg C, operating pressure 0.136/0.5 kg/cm2 @ 0-20 deg C, 304 s/steel internal filter mesh, GRP hood with pneumatic ram assisted open/close mechanism, openings: hood 1,12", 2-2", 1 end with 1-3", 1-2", 1 end with 2-2", mounted on (6) c/steel legs, filter with (1) s/steel centrifugal pump, (1) s/steel 2-stage vacuumn pump, driven by 11kw, 3/50/415 volt, 1450 rpm motor, (1) s/steel vacuumn pot.
32 Items ReturnedGo To Page: 12

Add Checked to Quote
 Add to Quote Before Changing Page

  

IPP Sales Contacts Minimize

Keith West
Global Sales
Email Keith
Direct: 1-609-838-5931
Office: 1-609-586-8004

Amanda Vagell
Global Sales, Israel
Email Amanda
Direct: 1-609-838-5929
Office: 1-609-586-8004

Patti Buchman
Global Sales
Email Patti
Direct: 1-609-838-5928
Office: 1-609-586-8004

Brian Brink
Global Sales
Email Brian
Direct: 1-609-838-6041
Office: 1-609-586-8004

Western Europe
Sales & Acquisitions
France, Belgium, Germany, Luxembourg, Netherlands, Denmark, Switzerland, Liechtenstein

Regina Zarmer
Click to email Regina
Office: 49-306-594-2445
Mobile: 49-172-313-8439

UK, Scandinavia, Africa, Southern Europe, Mid East (except Israel)
Sales & Acquisitions

Greenland, Monaco, San Marino, Italy, Malta, Andorra, Gibraltar, Greece, Finland, Norway, Sweden, Iceland, Faroe Islands, Turkey, Cyprus

Office: 44 (0)1642-367-910
Fax:    44 (0)1642-367-920

Jo Petrie
Click to email Jo
Direct: 44 (0)1642-367-913 Mobile: 44 (0)7770-748-884

Nicola Douglas
Click to email Nicola
Mobile: 44 7940 981 681

Eastern Europe, Western Asia Sales & Acquisitions
Czech Rep, Slovakia, Slovenia, Poland, Romania, Hungary, Ukraine, Lithuania, Bulgaria, Bosnia, Albania, Croatia, Serbia, Belarus, Estonia, Latvia, Macedonia, Moldova, Russia, Georgia, Bashkortostan, Kazakhstan, Kirghizia, Krygyzstan, Tajikistan, Turkmenistan, Uzbekistan, Armenia, Azerbaijan 

Bohumil Cuta
Click to email Bohumil
Office: 42-054-821-6680
Mobile: 42-060-273-7517

Central & South America, Caribbean Sales

Office: 1-609-586-8004
Elisa Lucumi
Click to email Elisa
Direct: 1-609-838-5927

Edis Castillo
Click to email Edis

 

     

Home | About Us | News | Contact Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | Mailing List | IPP's eBay Store | PDF Downloads | Events
  Copyright 2002-2014 International Process Plants   Terms Of Use  Privacy Statement   
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association National Demolition Association Turnaround Management Association Association Memberships