 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
| 46 Items Returned | Go To Page: | 1 | 2 | 3 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 2472 | GEAR REDUCER | | 10 | 10 HP @ 1530 rpm input, 18.1:1 ratio, 84 1/2" rpm output, Westinghouse speed reducer. Horiz/parallel shafts, 1 1/4" dia x 3" input, 2 1/2" dia x 4" output. Shafts on 15" centerline. Base to centerline of shafts 7". Mdl 81171. Herringbone gears, single right hand input. Single left hand output. |
|
|
| 4491 | GEAR REDUCER | | 150 | Approx 150 HP @ est 1200 rpm input, Philadelphia speed reducer. 159:1 ratio, 7.5 rpm output. Horiz right angle shafts, 2 1/2" dia x 4 1/4" input, 6 1/2" dia x 9" output. Base to centerline of shafts 21". Mdl 3618BLT. Serial #57183. Single input, single right hand output. |
|
|
| 14700 | GEAR REDUCER | | 5 | Western gear reducer. Model D54. 36:1 ratio. 1 1/2" diameter x 1 3/4" long input shaft, 10 1/2" from center to ground and 3" diameter x 5 1/4" long, 10 1/2" to ground output shaft. |
|
|
| 15885 | GEAR REDUCER | | 2 | 2 HP, Reliance horiz gear reducer. Concentric shaft design. Gear ratio 129.7:1 w/output of 13.5 rpm. Direct coupled to 2 HP, Reliance 3/60/230/460 volt, 1730 rpm TEFC motor. |
|
|
| 17135 | GEAR REDUCER | | 400 | 400 HP, Sunstrand gear increaser. Model LMC333, SN 75115916A. Input rpm 3550, output rpm 14,738. |
|
|
| 17168 | GEAR REDUCER | | 4 | 4 HP dual shaft gear reducer. Mfd by Winsmith, Model 5CB, SN 852-229H, 1978. Dual output shafts, right angle to side. Input 1800 rpm, output 200 rpm. 9:1 ratio. |
|
|
| 18154 | GEAR REDUCER | | 5175 | General Electric speed increaser. Type S237AR, SN 138446. Rated 5175 HP, 1780 rpm input, 5472 rpm output. 3.07:1 ratio. |
|
|
| 18580 | GEAR REDUCER | | 500 | 500 HP high duty gear reducer. Mfd by Lufkin, Mdl N1402C, SN 477, blt 1981. Input rpm 4500, ratio 6.906:1, service factor 2.19. Catalogue rating 1095 HP, service rating 500 HP. Distance from center of gear to the ground 21". |
|
|
| 21062 | GEAR REDUCER | | 10 | 10 HP Falk gear reducer. Mdl 102-7EZX315A4, blt 1955. Unit rated 30 rpm, 59.07:1 ratio. Shovel mount for motor. Unit direct coupled to 10 HP, 3/60/220/440 volt, 1735 rpm TEFC motor. 4 7/8" dia output shaft. |
|
|
| 22792 | GEAR REDUCER | | 150 | 150 HP, Elliott Mdl B1-2 reducer. 4.02 ratio, 4800 rpm input, 1200 rpm output. SN H2311; SF 1.1. Unit mounted on base. |
|
|
| 22897 | GEAR REDUCER | | 5 | Link Belt P.I.V. variable speed drive. Mfd by FMC, Mdl 0410-043L, SN LAO-177118A1. Maximum rpm input 875. Unit rated 5 HP delivered @ 1237 rpm output, 3.5 HP delivered @ 619 rpm output. 2:1 ratio. Chain size 3-26. Offset parallel shaft design. No motor. |
|
|
| 32439 | GEAR REDUCER | | | Renold Limited worm gear reducer. Size 12. Ratio 210:1. Right angle down design. 5" dia x 6" long output shaft. |
|
|
| 37998 | GEAR REDUCER | | 110 | 110 HP, Elloit gear reducer. SN Y-2207-2G, Size C1. Service Factor 1.3. Input rpm 4375, output rpm 1750. |
|
|
| 38001 | GEAR REDUCER | | 4460 | 4,460 HP Philadelphia model 224HSS gear reducer. SN 112116. Service Factor 2.0, ratio 6.648, input rpm 8000, output rpm 1203. |
|
|
| 41409 | GEAR REDUCER | | 4155 | 4,155 HP Phila Mdl 14HS horiz increaser. SN 120890. Ratio 5.19, max allowable torque 14711 lb/ft, 1.55 SF, 97.8% eff. Output rpm 9259, input rpm 1785. Fabricated steel w/oil pump. |
|
|
| 41410 | GEAR REDUCER | | 7000 | ****7,000 HP Phila Mdl 16HS horiz increaser. SN 123104. Ratio 6.5, max torque 20763 lb/ft, 97.7% eff. Output rpm 11505, input rpm 1777. |
|
|
| 46891 | GEAR REDUCER | | 8 | 7 1/2 HP str thru Falk gear reducer. SN 2-15-B8, Type 7.52-4EZ. Input rpm 1750, output rpm 84. Ratio 20.85:1. 1 1/4" dia x 2 3/4" long input shaft, 2 1/2" dia x 4" long output shaft. No motor. |
|
|
| 46893 | GEAR REDUCER | | 10 | Approx 10 HP str thru flanged gear reducer. 1 1/2" dia x 4" long input shaft. 3" dia x 4" long output shaft. Flange 28" dia w/4-holes. No motor. |
|
|
| 46894 | GEAR REDUCER | | 5 | 5 HP str thru Falk gear reducer. Mdl 4C1-02-A6, blt 1972. Input rpm 1750, output rpm 420. 4.211:1 ratio. 1 5/8" dia x 3 1/2" long input and output shafts. No motor. |
|
|
| 46895 | GEAR REDUCER | | 15 | 15 HP Falk CS gear reducer. Mdl 5C202A4, blt 1976. Unit rated 9.24:1 ratio. 1170 rpm input, 1170 rpm output. Has 3" dia x 5 1/4" output shaft and 1 3/4" dia x 3 3/4" long input shaft. |
| 46 Items Returned | Go To Page: | 1 | 2 | 3 |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|