 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
IPPE Equipment Seach
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 2778 | GLASS LINED PARTS | AGITATOR | 052X03 | 3" dia x 52" long x 28" span, Pfaudler glass lined anchor agit. With 1 1/2" bore, for low duty packing gland. For 2 1/2" SB drive. Fits 150 gal EM Series reactor. |
|
|
| 7510 | GLASS LINED PARTS | AGITATOR | 036X02 | 2" dia x 36" long x 21" span, glass lined anchor agit. With 1 1/8" bore, for low duty packing gland. For PB drive. Fits 50 gal P Series reactor. |
|
|
| 7987 | GLASS LINED PARTS | AGITATOR | 062X03 | 3" dia x 62" over all length x 30" span glass lined agit, 3-blade retreat curve. TW drive end, mechanical seal. For a 200 gal EM series reactor. |
|
|
| 8370 | GLASS LINED PARTS | AGITATOR | 147X3+ | 3 1/2" dia x 147" long Pfaudler glass lined nucerite crylock agit shaft. RW drive end. For 2,000 gal reactor. |
|
|
| 8691 | GLASS LINED PARTS | AGITATOR | 121X3+ | 3 1/2" dia x 121 1/2" over all length x 44" span, Pfaudler nucerite 3-blade retreat curve agit. W/Hastelloy sleeve 4" dia x 7" long, for high duty packing gland. For 5TW drive. Fits 1,000 gal RA Series reactor. |
|
|
| 10098 | GLASS LINED PARTS | AGITATOR | 036X02 | 2" dia x 36" long x 21" span, Pfaudler glass lined anchor agit. With 1 1/8" bore, for low duty packing gland. For PB drive. |
|
|
| 10107 | GLASS LINED PARTS | AGITATOR | 133X4+ | 4 1/2" dia x 133" long x 54" span, Pfaudler glass lined 3-blade retreat curve agit. Bell end. |
|
|
| 10152 | GLASS LINED PARTS | AGITATOR | 050X02 | 2" dia x 50" long x 26" span, Pfaudler glass lined 2-blade str impellor. W/Hastelloy sleeve 1 3/4" dia x 3 1/2" long, with 1 1/8" bore, for low duty packing gland. For PB drive. Fits 100 gal P Series reactor. |
|
|
| 10245 | GLASS LINED PARTS | AGITATOR | 064X3+ | 3 1/2" dia x 64 1/2" long x 38" span, Pfaudler glass lined anchor agit. Hastelloy sleeve. 2 1/4" bore. For 3" dia MB drive. |
|
|
| 11202 | GLASS LINED PARTS | AGITATOR | 044X03 | 3" dia x 44" long x 24" span, Pfaudler glass lined anchor agit. W/Hastelloy sleeve 2 1/2" dia x 6" long, with 1 1/2" bore, for high duty packing gland. For SB drive. Fits 75 gal ES Series reactor. |
|
|
| 11214 | GLASS LINED PARTS | AGITATOR | 062X3+ | 3 1/2" dia x 62" long x 32" span, Pfaudler glass lined anchor agit. W/Hastelloy sleeve 3 1/2" dia x 7" long, with 2 1/4" bore, for high duty packing gland. For MB drive. Fits 200 gal EM Series reactor. |
|
|
| 11215 | GLASS LINED PARTS | AGITATOR | 066X3+ | 3 1/2" dia x 66" long x 40" span, Pfaudler rubber lined anchor agit. With 2 1/2" bore, for low duty packing gland. For MB drive. Fits 300 gal EL Series reactor. |
|
|
| 11216 | GLASS LINED PARTS | AGITATOR | 054X3+ | 3 1/2" dia x 54" long x 32" span, Pfaudler glass lined anchor agit. W/Hastelloy sleeve 3 1/2" dia x 7 1/4" long, with 2 1/4" bore, for high duty packing gland. For MB drive. Fits 150 gal EM Series reactor. |
|
|
| 11217 | GLASS LINED PARTS | AGITATOR | 054X3+ | 3 1/2" dia x 54" long x 32" span, Pfaudler glass lined anchor agit. W/Hastelloy sleeve 3 1/2" dia x 7 1/4" long, with 2 1/4" bore, for high packing gland. For MB drive. Fits 150 gal EM Series reactor. |
|
|
| 11218 | GLASS LINED PARTS | AGITATOR | 066X3+ | 3 1/2" dia x 66" long x 40" span, glass lined anchor agit. Low duty w/Hastelloy sleeve for MB drive, 4" nozzle. For use w/300 gal EL Series reactor. |
|
|
| 11220 | GLASS LINED PARTS | AGITATOR | 066X3+ | 3 3/4" diameter x 40" x 66" long glass lined anchor agitator. High duty with Hastelloy sleeve for MB drive, 4" nozzle. For use with 300 gallon Series EL reactor. |
|
|
| 11326 | GLASS LINED PARTS | AGITATOR | 056X3+ | 3 1/2" dia x 56" long x 33" span, Pfaudler glass lined anchor agit. W/Hastelloy sleeve 3 1/4" dia x 6 1/2" long, with 2 1/4" bore, for high duty packing gland. For MB drive. Fits 150 gal EM Series reactor. |
|
|
| 11378 | GLASS LINED PARTS | AGITATOR | 026X02 | 2" dia x 26 1/2" long x 14" span, Pfaudler glass lined anchor agit. W/Hastelloy sleeve 1 3/4" dia x 3 1/2" long, with 1 1/8" bore, for low duty packing gland. For PB drive. Fits 20 gal P Series reactor. |
|
|
| 11414 | GLASS LINED PARTS | AGITATOR | 036X02 | Reglassed 50 gal 3-blade retreat curve glass lined agitator approximately 36" overall length x 2" dia. with 20" span. For a DTW drive. Reglassed in Romania by UGE. |
|
|
| 11436 | GLASS LINED PARTS | AGITATOR | 026X02 | 2" dia x 26 1/2" long x 15" span, Pfaudler glass lined 2-blade str impellor. With 1 1/8" bore. Hastelloy sleeve 1 3/4" x 3 1/4". SB drive end. Fits 30 gal P Series reactor. |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|