RegisterLogin
Need Help? or
Have something for sale? USE THIS FORM:
First Name:  
Last Name:  
Email Address:  
Company Name:  
Telephone:  
Country:  
Question:  
 
     

Chillers Minimize
1 of 10
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
 
  

 

Used Heat Exchangers & Used Condensers

Used Stainless Steel Heat Exchangers

Used Heat Exchangers and Used Condensers Heat exchangers are unfired heat transfer equipment used in process plants. Heat exchangers are used for the transfer of heat or cold between two fluids for the purpose of heating the process, cooling the process, or condensing vapors during the process. Heat exchangers are measured in Square Feet.

There are several different types of heat exchangers. These include:

  • Shell and Tube - Also called a condensers and calandrias depending on the service, this type of heat exchanger has external cylinder called a shell with internal tubes that run the length of the shell. There are tube sheets on each end of the tubes sealing the shell around the tubes. There are covers on each end called heads and these can come in several configurations. The shell side has a pressure and temperature rating and the tube side has a pressure and temperature rating. They can be vertical or horizontal. Basic principal of operation is that one fluid flows through the tube and the other fluid flows around the tubes. The fluid inside the tubes can flow in a single pass or multiple passes using baffles in the heads.
  • Graphite Exchangers - Graphite block exchangers are typically made from a solid block of graphite with parallel holes drilled at right angles. The blocks can be cylindrical or cube shaped. The blocks are typically stacked with gaskets in-between to product more square foot surface area. The blocks are inserted in carbon steel housing. Graphite shell and tube exchangers have graphite tubes and heads with Carbon Steel shells.
  • Plate Heat Exchangers - Plate exchangers consist of a series of alloy plates held together by a frame. The frame can be opened to add or repair the plates. One liquid flows through alternate plates and the other liquid flow the opposite direction through the opposite plates.
  • Spiral Heat Exchangers - Spiral exchanger are made from a pair of plates rolled to provide two relatively long rectangular passages for fluid in counter current flow. The spiral design is compact.
  • Fin Fan / Air Fin Exchangers - This type of exchanger has radial fins on the outside of the tubes to extend the heat transfer surface area. Tubes are mounted in horizontal banks, and multiple fans blow air across the outside of the tubes for cooling the process fluid inside the tubes.
  • Compoblock - This new type of heat exchanger is like a plate exchanger except the plates are welded together instead of gasketed, and the plates are mounted in a cube shaped shell like a graphite block exchanger. This type offers compact design, ability to use high alloys, and closed environment to prevent leaks.

Equipment Search

Enter a product number or part of its description below and click SEARCH
  Search View Quote Contents

Finally, you may filter the results based on capacity below

    Narrow Results by Capacity

Add Checked to Quote
 Add to Quote Before Changing Page

17 Items ReturnedGo To Page: 1
  Stock NumberProductSub GroupCapacityDescription
Details
3467HEAT EXCHANGERCOPPER BRASS 400Approx 400 sq ft tube and shell heat exchanger. 14" dia x 16' long brass tubes. Floating head, CS heads. Shell connections 2-3", 2- 1 1/4", head connections 2-2", 1-1", 1-1 1/2". 8' overall length.
Details
207570HEAT EXCHANGERCOPPER BRASS18501850 SqFt Horizontal Admiraty Brass Tube/ CS Head / CS Shell, horizontal heat exchanger Manufactured by API Ketema, Serial Number U973530C, National Board Number 14134, Rated 150 PSI @350 Degrees F Shell side; 75 PSI @ 300 degrees F tube side. Size 25-C-72. With approx. (750), 3/4" OD x 18 guage x 12'6" long , with CS tubes sheet 1 3/4" thick. CS shell is 30" diameter x 18'8" long OAL, (2) CS dished heads.
Details
207571HEAT EXCHANGERCOPPER BRASS13351335 SqFt, Admiraty Brass Tube/ CS Head / CS Shell, horizontal heat exchanger Manufactured by API Ketema, Serial Number U973530B, National Board Number 14133, Rated 150 PSI @350 Degrees F Shell side; 75 PSI @ 300 degrees F tube side. Size 25-C-72. (486) tubes, 3/4" OD x 18 guage x 14' long , with CS tubes sheet 1 1/2" thick. CS shell is 24" diameter x 14' long, (2) CS heads. Mounted on Saddles.
Details
207572HEAT EXCHANGERCOPPER BRASS18501850 SqFt Horizontal Admiraty Brass Tube/ CS Head / CS Shell, horizontal heat exchanger Manufactured by API Ketema, Serial Number U973530A, National Board Number 14132, Rated 150 PSI @350 Degrees F Shell side; 75 PSI @ 300 degrees F tube side. Size 19-B-156, Type AEW. With approx. (750), 3/4" OD x 18 guage x 12'6" long , 3/4" OD x 18 guage x 12'6" long. With CS tubes sheet 1 3/4" thick. CS shell is 30" diameter x 18'8" long OAL, (2) CS Channel heads. Openings include: Tube Side - (2) 12", (2) 1.5" drains; Shell side - (2) 6", (2) 1.5". Mounted on saddles.
Details
216296HEAT EXCHANGERCOPPER BRASS12481248 Sq.Ft., Admarality Brass tubes, CS heads, CS shell, horizontal heat exchanger (Condenser). Manufactured by Refrigeration Valves and Systems, Serial # 91724. NB # 4189. Shell rated for 300 psi at 200 degrees F., Tubes rated for 150 psi at 200 degrees F. (318) straight tubes, 3/4" od x 18 GA x 20' long. Overall dimensions 21" diameter x 273" overall length. 2 Pass, with saddle mounting. Tube side nozzles are two 8". Shell nozzle size is 4" & 6".
Details
218570HEAT EXCHANGERCOPPER BRASS213213 SqFt, CS Tube/ CS Head / CS Shell, horizontal heat exchanger, Manufactured by Perry, National Board number 6096, Serial Number B-6110, Rated 100 PSI @ -20 to 200 degrees F in the tubes; 100 PSI @ -20 to 200 degrees F in the shell. With (136) 3/4" OD x 14 guage x 8' long 316SS tubes, 4 pass tube side. CS tube sheet. Shell is 14" diameter x 8' straight side, with (2) bolted dished heads. Openings include: Shell - (2) 2"; One head (2) 2". Overall Length is 11'. Mounted on saddles.
Details
218622HEAT EXCHANGERCOPPER BRASS9999 SqFt, Admlty Brass Tubes/ CS heads /CS shell horizontal heat exchanger, Manufactured by Doyle and Roth, Type BEU, Size 12-60, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (108) 3/4" OD x 0.049 thick x 60" long U tubes, Alloy 443SB111, CS tube sheet. Shell is 12" diameter x 86" OAL. Mounted on saddles.
Details
218623HEAT EXCHANGERCOPPER BRASS9999 SqFt, Admlty Brass Tubes/ CS heads /CS shell horizontal heat exchanger, Manufactured by Doyle and Roth, Type BEU, Size 12-60, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (54) U-tubes, 3/4" OD x 0.049 thick x 10' total length around the bend, 60" straight side, Alloy 443SB111, CS tube sheet with (108) holes. Shell is 12" diameter x 86" OAL. Mounted on saddles.
Details
218624HEAT EXCHANGERCOPPER BRASS9999 SqFt, Admlty Brass Tubes/ CS heads /CS shell horizontal heat exchanger, Manufactured by Doyle and Roth, Type BEU, Size 12-60, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (108) 3/4" OD x 0.049 thick x 60" long U tubes, Alloy 443SB111, CS tube sheet. Shell is 12" diameter x 86" OAL. Mounted on saddles.
Details
218625HEAT EXCHANGERCOPPER BRASS9999 SqFt, Admlty Brass Tubes/ CS heads /CS shell horizontal heat exchanger, Manufactured by Doyle and Roth, Type BEU, Size 12-60, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (54) U-tubes, 3/4" OD x 0.049 thick x 10' total length around the bend, 60" straight side, Alloy 443SB111, CS tube sheet with (108) holes. Shell is 12" diameter x 86" OAL. Mounted on saddles.
Details
218626HEAT EXCHANGERCOPPER BRASS6666 SqFt, Admlty Brass Tubes/ CS heads /CS shell horizontal heat exchanger, Manufactured by Doyle and Roth, Type BEU, Size 10-60, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (36) U-tubes, 3/4" OD x 0.049 thick x 10' total length around the bend, 60" straight side, Alloy 443SB111, CS tube sheet with (72) holes. Shell is 10" diameter x 86" OAL. Mounted on saddles.
Details
218627HEAT EXCHANGERCOPPER BRASS6666 SqFt, Admlty Brass Tubes/ CS heads /CS shell horizontal heat exchanger, Manufactured by Doyle and Roth, Type BEU, Size 10-60, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (36) U-tubes, 3/4" OD x 0.049 thick x 10' total length around the bend, 60" straight side, Alloy 443SB111, CS tube sheet with (72) holes. Shell is 10" diameter x 86" OAL. Mounted on saddles.
Details
218628HEAT EXCHANGERCOPPER BRASS229229 SqFt, Admlty Brass Tubes/ 304SS head /CS shell horizontal heat exchanger, Manufactured by Perry, Serial Number B-6531, National Board Number 6523, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (84) U-tubes, 3/4" OD x 18 Guage x 16' total length around the bend, 8' straight side, Alloy 443SB111; 304SS tube sheet with 178 holes. Shell is 16" diameter x 9' OAL. Mounted on saddles.
Details
218629HEAT EXCHANGERCOPPER BRASS6666 SqFt, Admlty Brass Tubes/ CS heads /CS shell horizontal heat exchanger, Manufactured by Doyle and Roth, Type BEU, Size 10-60, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (36) U-tubes, 3/4" OD x 0.049 thick x 10' total length around the bend, 60" straight side, Alloy 443SB111, CS tube sheet with (72) holes. Shell is 10" diameter x 86" OAL. Mounted on saddles.
Details
218630HEAT EXCHANGERCOPPER BRASS9999 SqFt, Admlty Brass Tubes/ CS heads /CS shell horizontal heat exchanger, Manufactured by Doyle and Roth, Type BEU, Size 12-60, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (54) U-tubes, 3/4" OD x 0.049 thick x 10' total length around the bend, 60" straight side, Alloy 443SB111, CS tube sheet with (108) holes. Shell is 12" diameter x 86" OAL. Mounted on saddles.
Details
218635HEAT EXCHANGERCOPPER BRASS9999 SqFt, Admlty Brass Tubes/ CS heads /CS shell horizontal heat exchanger, Manufactured by Doyle and Roth, Type BEU, Size 12-60, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (54) U-tubes, 3/4" OD x 0.049 thick x 10' total length around the bend, 60" straight side, Alloy 443SB111, CS tube sheet with (108) holes. Shell is 12" diameter x 86" OAL. Mounted on saddles.
Details
218636HEAT EXCHANGERCOPPER BRASS9999 SqFt, Admlty Brass Tubes/ CS heads /CS shell horizontal heat exchanger, Manufactured by Doyle and Roth, Type BEU, Size 12-60, rated 100 psi @ -20 to 350 degrees F tube side/ 100 psi @ -20 to 350 degrees F shell side. (54) U-tubes, 3/4" OD x 0.049 thick x 10' total length around the bend, 60" straight side, Alloy 443SB111, CS tube sheet with (108) holes. Shell is 12" diameter x 86" OAL. Mounted on saddles.

Add Checked to Quote
 Add to Quote Before Changing Page
  

IPP Sales Contacts Minimize
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931
Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929
Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928
Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043
Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax
Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax
Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax
Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927

     

Home | About Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | News | Media | Contact Us
  Copyright 2002-2010 International Process Plants   Terms Of Use  Privacy Statement   
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association National Demolition Association Turnaround Management Association Association Memberships
Bookmark and Share

Follow Us On Twitter View Our Channel on YouTube