 |
|
Need Help? or Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Heat Exchangers & Used CondensersUsed Stainless Steel Heat Exchangers
Heat exchangers are unfired heat transfer equipment used in process plants. Heat exchangers are used for the transfer of heat or cold between two fluids for the purpose of heating the process, cooling the process, or condensing vapors during the process. Heat exchangers are measured in Square Feet.
There are several different types of heat exchangers. These include: - Shell and Tube - Also called a condensers and calandrias depending on the service, this type of heat exchanger has external cylinder called a shell with internal tubes that run the length of the shell. There are tube sheets on each end of the tubes sealing the shell around the tubes. There are covers on each end called heads and these can come in several configurations. The shell side has a pressure and temperature rating and the tube side has a pressure and temperature rating. They can be vertical or horizontal. Basic principal of operation is that one fluid flows through the tube and the other fluid flows around the tubes. The fluid inside the tubes can flow in a single pass or multiple passes using baffles in the heads.
- Graphite Exchangers - Graphite block exchangers are typically made from a solid block of graphite with parallel holes drilled at right angles. The blocks can be cylindrical or cube shaped. The blocks are typically stacked with gaskets in-between to product more square foot surface area. The blocks are inserted in carbon steel housing. Graphite shell and tube exchangers have graphite tubes and heads with Carbon Steel shells.
- Plate Heat Exchangers - Plate exchangers consist of a series of alloy plates held together by a frame. The frame can be opened to add or repair the plates. One liquid flows through alternate plates and the other liquid flow the opposite direction through the opposite plates.
- Spiral Heat Exchangers - Spiral exchanger are made from a pair of plates rolled to provide two relatively long rectangular passages for fluid in counter current flow. The spiral design is compact.
- Fin Fan / Air Fin Exchangers - This type of exchanger has radial fins on the outside of the tubes to extend the heat transfer surface area. Tubes are mounted in horizontal banks, and multiple fans blow air across the outside of the tubes for cooling the process fluid inside the tubes.
- Compoblock - This new type of heat exchanger is like a plate exchanger except the plates are welded together instead of gasketed, and the plates are mounted in a cube shaped shell like a graphite block exchanger. This type offers compact design, ability to use high alloys, and closed environment to prevent leaks.
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 3467 | HEAT EXCHANGER | COPPER BRASS | 400 | Approx 400 sq ft tube and shell heat exchanger. 14" dia x 16' long brass tubes. Floating head, CS heads. Shell connections 2-3", 2- 1 1/4", head connections 2-2", 1-1", 1-1 1/2". 8' overall length. |
|
|
| 11514 | HEAT EXCHANGER | SHELL TUBE - STAINLESS | 785 | UNUSED 785 sq ft horiz 304LSS tubeside, CS shell and U-tube heat exchanger. Mfd by General Electric, ASME Code. Rated 150 psi @ 370 deg F shell side, 1450 psi @ 564 deg F tube side. (80) 3/4" x 16 bwg x 25' long 304LSS U-tubes, 304SS tubesheet. CS head. 2 pass design. CS shell 18" dia x 25' long. Outlets: shell 2-8"; head 2-4". |
|
|
| 12445 | HEAT EXCHANGER | GRAPHITE | 1233 | 1,233 sq ft vert graphite tube, CS shell heat exchanger. Mfd by Carborendum, SN 5464, Mdl 101-199. Rated 75 psi both sides. Graphite tube side. CS shell. (199) 1 1/4" OD x 20' long tubes. Outlets: shell 2-3". |
|
|
| 12451 | HEAT EXCHANGER | GRAPHITE | 1933 | ****1,933 sq ft graphite vert tube, CS shell heat exchanger. Mfd by Carborendum, Falls Ind, SN 5514. Rated 50 psi @ 340 deg F tube side, 75 psi shell side @ 340 deg F. (608) 2" OD x 6' long graphite tubes. Heads are teflon coated. NB# shell only MK1-E101. CS shell 5'6" dia x 11'8" long. Openings: 2-10" shell side; 1-24", 1-12" tube side. Single pass. (4) mounting lugs. |
|
|
| 13267 | HEAT EXCHANGER | SHELL TUBE - STAINLESS | 1700 | ****UNUSED 1,700 sq ft vert SS tube, CS shell heat exchanger. Mfd by Foster Wheeler, Unit #X-226, SN: -1,44-2786-15. Rated 50 psi and full vac @ 300 deg F shell side, 725 psi @ 300 deg F tube side. 304SS tubes 6' long, SS tubesheet. (2) CS CS flat heads. CS shell 3'8" dia x 15' long. Outlets: shell 2-2 1/2"; heads 2-2 1/2". |
|
|
| 13270 | HEAT EXCHANGER | SHELL TUBE - STAINLESS | 1043 | UNUSED 1,043 sq ft vert U-tube and shell heat exchanger. Mfd by Atlas, Type BEU. NB #: 3082,3087,3081,3088. SN: 3372, 3737,3731,3837. Rated 1420 psi @ 575 deg F tube side, 150 psi @ 370 deg F shell side. (147) 5/8" x 22' long 304SS weld U-tubes, 304SS tubesheet. Removable tube bundle. CS dish head. 2 pass design. CS shell 23" dia x 18'6" long. Openings: shell 1-9", 1-6", 1-1 1/4"; head 2-4". |
|
|
| 13345 | HEAT EXCHANGER | SHELL TUBE - STAINLESS | 6100 | 6,100 sq ft horiz 304LSS tube, CS shell heat exchanger. Mfd by Wyatt, SN 68-D-9112. Rated 75 psi @ 300 deg F tube side, 475 psi @ 300 deg F shell side. (1,140) 3/4" x 28' long 304LSS rolled tubes, 304LSS tubesheet. (2) CS dish heads. 2 pass design. CS shell 37" dia x 34' long. Openings: shell 2-16"; one head 2-12". W/bellow type expansion joint. |
|
|
| 15202 | HEAT EXCHANGER | GRAPHITE | 57 | 57 sq ft graphite block heat exchanger. Mfd by Kearney, SN 3657-5555. Process side rated 50 psi @ 360 deg F, 57 sq ft with 3/8" tubes; service side rated 75 psi @ 360 deg F, 57 sq ft with 3/8" tubes. Outlets: 2-2", 2-3". |
|
|
| 19500 | HEAT EXCHANGER | PLATE AND FRAME | 2000 | Approx 2,000 sq ft 316SS plate heat exchanger. Mfd by American Heat Reclaiming, SN 10910, NB #8395. Unit has (275) plates, 23" wide x 4'6" long. Designed for 125 psi @ 250 deg F. Unit has 2-8" inlets and 2-8" outlets. |
|
|
| 19551 | HEAT EXCHANGER | SHELL TUBE - STAINLESS | 30 | Approx 30 sq ft all 316SS horiz U-tube and shell heat exchanger. Approx 14' long around bend 316SS U-tubes, 316SS tubesheet. 316SS heads. 316SS shell 4" dia x 93" long. |
|
|
| 20874 | HEAT EXCHANGER | SHELL TUBE - CARBON STEEL | 1552 | 1,552 sq ft horiz CRMO U-tube, CS shell heat exchanger. Mfd by Alco, SN 55888, NB: #7277,7285,7282,7274,7276,7283. Type AEU. Rated 450 psi @ 850 deg F tube side, 535 psi @ 600 deg F shell side. (276) 1" x 117" long CRMO tubes, CS tubesheet. Removable tube bundle. (2) CS heads (1-dished, 1-flat). CS shell 3' dia x 17' long. Openings: shell 2-12"; heads 2-12". 1,552 sq ft horiz CRMO U-tube, CS shell heat exchanger. Mfd by Alco, SN 55888, NB #: 7277, 7285, 7282, 7274, 7276, 7283. Type AEU. Rated 450 psi @ 850 deg F tube side, 535 psi @ 600 deg F shell side. (276) 1" x 117" long CRMO tubes, CS tubesheet. Removable tube bundle. (2) CS heads (1-dished, 1-flat). CS shell 3' dia x 17' long. Openings: shell 2-12"; 1,552 sq ft horiz CRMO U-tube, CS shell heat exchanger. Mfd by Alco, SN 55888, NB: #7277,7285,7282,7274,7276,7283. Type AEU. Rated 450 psi @ 850 deg F tube side, 535 psi @ 600 deg F shell side. (276) 1" x 117" long CRMO tubes, CS tubesheet. Removable tube bundle. (2) CS heads (1-dished, 1-flat). CS shell 3' dia x 17' long. Openings: shell 2-12"; |
|
|
| 21339 | HEAT EXCHANGER | GLASS LINED | 14 | 14 sq ft pyrex tube and shell heat exchanger. Has (7) 3/4" OD x 124" long pyrex tubes. Pyrex shell 3 1/2" dia x 12' long. |
|
|
| 21593 | HEAT EXCHANGER | GLASS LINED | 14 | 13 1/2 sq ft pyrex tube and shell heat exchanger. (7) 3/4" OD x 10'6" long pyrex tubes. Pyrex heads. Pyrex shell 3 1/2" dia x 10'6" long. |
|
|
| 21841 | HEAT EXCHANGER | SHELL TUBE - CARBON STEEL | 1886 | 1,886 sq ft CS tube and shell heat exchanger. Mfd by Pfaudler, NB #35144, SN E374-2388. Tube side rated 100 psi @ 400 deg F, shell side rated 180 psi and full vac @ 400 deg F. 3/4" OD x 12' long CS tubes, CS tubesheet. (2) CS weld-on channel heads w/flat bolt-on covers. CS shell 30" dia x 14' long. Openings: shell 1-8", 1-5" w/sump; heads 1-4", 1-8", 2-2". |
|
|
| 22137 | HEAT EXCHANGER | GRAPHITE | 91 | 91 sq ft cylindrical graphite tube, CS shell heat exchanger. Mfd by Union Carbide, Size 10-108, CPD #6A35973. Shell and tubes rated 75 psi @ 338 deg F. (31) 7/8" ID x 9' long tubes. CS shell 10" dia x 11' overall length. Openings: one head 1-3"; other head 1-6"; shell 2-3". |
|
|
| 22587 | HEAT EXCHANGER | GRAPHITE | 380 | Approx 380 sq ft horiz graphite tube CS shell heat exchanger. Mfd by Active Chem System (Newbury,CT), SN 146. Unit rated 75 psi @ 340 deg F both sides. 1 1/4" OD (7/8" ID) tubes, 14' long. Shell 20" dia x 17' overall length. 2 pass tube side. Openings: tube side 2-6"; shell side 2-3". |
|
|
| 23043 | HEAT EXCHANGER | COPPER BRASS | 157 | 157 sq ft copper tubes, 304SS shell and heads heat exchanger. Mfd by Vendome Copper and Brass, NB #6671976. Tube side rated atmospheric @ 300 deg F, shell side rated 65 psi @ 300 deg F. (100) 3/4" OD x 14 gauge x 8' long copper tubes, 304SS tubesheet. 304SS heads. 304SS shell 14" dia. |
|
|
| 23163 | HEAT EXCHANGER | GRAPHITE | 99 | 99.5 sq ft Union Carbide graphite tube side, CS shell heat exchanger. Unit has (19) 7/8" ID, 1 1/4" OD x 16' long tubes. Shell 8" dia x 220" overall length. |
|
|
| 23179 | HEAT EXCHANGER | SHELL TUBE - STAINLESS | 5000 | 5,000 sq ft 304SS tube, 304SS clad shell heat exchanger. Mfd by MW Kellogg, Type AES. Tube side rated 375 psi @ 325 deg F, shell side rated 450 psi @ 325 deg F. (1,275) 3/4" dia x 19'6" long tubes. CS heads. Shell 44" dia x 24' long. Single pass design. Openings: shell 1-18", 2-6"; heads 1-14", 1-6", 3-2". |
|
|
| 23188 | HEAT EXCHANGER | SHELL TUBE - CARBON STEEL | 2023 | 2,023 sq ft all CS tube and shell heat exchanger. Mfd by Industrial Process, SN 62762, NB #3068, Type BEL. Tube side rated 1200 psi @ 600 deg F, shell side rated 145 psi @ 750 deg F. (966) 1/2" tubes. 2 pass design. Shell 36" x 16' long. |
|
|
|
|
|
IPP Sales Contacts
|
 |
|
Keith West Global Sales KeithW@ippe.com +1 609 838 5931 | Amanda Vagell Global Sales AmandaV@ippe.com +1 609 838 5929 | Patti Buchman Global Sales PattiB@ippe.com +1 609 838 5928 | Ray Wagner Global Sales RayW@ippe.com +1 609 838 6043 | Regina Zarmer Europe Sales & Acquisitions ReginaZ@ippe.com +49-306-594-2445 Office +49-172-313-8439 Mobile +49-30-6594-2448 Fax | Jo Petrie, Sales Engineer UK, Scandinavia, Spain, & So.Africa jop@ippe.com +44 (0)1642 367 910 Office +44 (0)1642 367 913 Direct +44 (0)7770 748884 Mobile +44 (0)1642 367 920 Fax | Bohumil Cuta, E. Europe Sales & Acquisitions BohumilC@ippe.com +42-054-821-6680 Office +42-060-273-7517 Mobile +420-5-481-22240 Fax | Elisa Lucumi Central & So. America Sales ElisaL@ippe.com +1 609 838 5927
|
|
|
|
|
|
|
|