 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
|
| Stock Number | 210004 |
| PG | INCINERATOR |
| SG | |
| SSG | |
| Capacity | 38537 |
| Product Description | 48450 m3/hr (max) CS, Ecopure Regenerative Thermal Oxidizer, type RTOC3-3040, efficient exhaust gas purification system, manufactured by Durr Systems Gmbh, serial # 9377, order # 406-301-5, minimum flow volume 10,450 m3/hr, max pressure drop 6000 pa, combustion chamber temperature (regulator) 820 deg C, burner capacity 2 x 850 kw (max).
Overall system data:
Overall length of system 23344mm x 8284mm wide x 7490mm high, chimney stack height 13025mm, (3) RTO regenerator sectors, volumetric exhaust air flow, minimum 10450 Nm3/hr, average 47750 Nm3/hr, max 48450 Nm3/hr, exhaust air inlet temperature 20 deg C (nominal), Oxygen content in exhaust air 18% (min), exhaust air pressure at inlet to RTO system -5 mbar, quantity of pollutants in exhaust air 71 kg/hr (average), pollutant concentration 1.5 g/Nm3, net calorific value of pollutants approx 11.93 kWh/kg, exhaust preheating by ceramic heat exchanger approx 780 deg C, combustion chamber temperature 820 deg C, cleaned gas outlet temperature approx 68 deg C,
Thermal reactor data:
Reactor column 10120mm x 3620mm, sector 3260mm x 3620mm, column height 2130mm, layer height of ceramic honeycomb blocks 1.8m, sub-construction height 3670mm, distance between sectors 200mm,
Combustion Chamber:
Dimensions 10140mm long x 3480mm wide x 1690mm high, (2) gas burners each 850 kw (nominal) capacity, pre-pressure of natural gas 167 mbar, net calorific value of natural gas 10 kWh/Nm3,
Air system:
Process, purge, fresh, exhaust and crude air temperature approx 20 deg C, cleaned gas approx 68 deg C, cleaned gas fan volumetric flow 54000Nm3/hr nominal, 73780 m3/hr @ 100 deg C, speed 1665 rpm, total pressure difference 7730 pa, motor 200 kw, combustion air fan volumetric flow 3720 m3/hr, total pressure difference 8700 pa, motor 7.5 kw, 2880 rpm, purge air fan volumetric flow 2640 m3/hr, total pressure difference 3500 pa, motor 3.1 kw, 2830 rpm,
Electrical equipment:
Operating voltage 3 x 415 V, 50 Hz, burner, general control and motor valve voltage 240 V, 50 Hz, control I/O level, signal lamp, valve and interlocking voltage 24 V DC, |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|