New search | Used INCINERATOR

IPPE Inventory Record Detail
Stock Number	214327
PG	INCINERATOR
SG
SSG
Capacity	10
Product Description	1800 degree F, John Zinc Thermal Oxidizer system, skid mounted design. Available with a waste heat boiler (See IPP # 214326). The thermal oxidizer is designed to incinerate various combinations of solvent laden processing fumes. Designed to accept the stream of hot-vent gas containing 14,000 ppmv of VOC entrainment at 810 scfm; cold-vent gas stream of 2,200 scfm containing (tract)100 ppm of VOC. In addition, unit was set up to accept a future waste liquid stream of 1 gpm H2O with 1% phenolic material and ½ gpm organic waste.. System Serial Number 904756. System consists of a 10mm BTU/Hr John Zink burner; 6'6" OD x 21' Long horizontal Thermal Oxidizer/Incinerator; 1100 CFM hot vent fan 7.5HP; 5400 SCFM combustion air fan 40 HP; 3'9" OD x 50" high vent stack; 2' diameter x 8' straight side knockout drum; NEMA 4, Nitrogen Purged Control Panel; Nema 4 Junction boxes; and piperack mounted fuel gas and pilot gas train with the control panel is mounted on the piperack. Controls include a Honeywell Universal Digital controller, type UDC2500, Limit Control Model. Brief description of the process - Natural gas is burned to bring the thermal oxidizer up to 1700 degrees F operating temperature. A retention time of one second is provided in the thermal oxidizer to convert the organic compounds to carbon dioxide, water vapor and sulfur dioxide. The incinerator is 6'6" ID x 21' long, 804 CuFt usable volume, lined with 4" of insulating castable. The burner has a carbon steel, center fired fuel gas gun. The vent stack is lined with 4" of insulating refractory. The system is mounted on skids that make trasportaion and reassembly easier.
Return to Inventory Search Add to Quote View Quote Contents