New Search | Used KILN AND CALCINER

13 Items Returned Go To Page: 1
		Stock Number	Product	Sub Group	Capacity	Description
Details Add to Quote		73480	KILN AND CALCINER		1026	UNUSED 18.4" (460mm) dia x 26'3" (8000mm) long nickel (2.4068) calciner. Mfd by Plant and Equipment Eng (Germany), SN A27146, Type AG22/11/DK94-241, blt 1988. Heating zone 24" (600mm) wide, cooling zone 17'9" (5400mm) long. Tube driven by 1.5 KW, 3/50/380 volt motor. Calciner is electrically heated within a brick housing. Maximal allowable temps are: for the outer walls of the tube heating body 1652 deg F (900 deg C), for the heating chamber 1472 deg F (800 deg C), for the tube 752 deg F to 842 deg F (400 deg C to 450 deg C). Electrical heating capacity 5 KW. Tube speed 1-5 rpm.
Details Add to Quote		83298	KILN AND CALCINER		99086	12'3" (3.74 meter) OD, (9'10" (3 meter) inside refractory) x 86' (26.3 meter) long CS direct fired rotary kiln. Rated capacity 3,300 ton/yr. Mfd by Babcock Krauss-Maffei. Temp 1200 deg C - 1300 deg C. Shell thickness 20mm, 114mm thick heat insulation lining and 250mm thick refractory. SS lifters and cast refractory lifters. Dual fuel (natural gas/oil) direct fired burners. Girth gear driven by variable speed drive, 9-59 kw, 3/50/310 volt, 50-3260 rpm motor, 1.48 rpm max. Unit has air driven emergency drive, .145 rpm max. Kiln equipped w/on-board control panel used to sequence the actuation of the air injection valves and control the fans. Gas consumption kiln 6.6 cu meters/S, afterburner 3.8 cu meter/S. Steam fed via rotary coupling to manifolds mtd on outside of kiln shell and feed end. Controlled by remote operated valves which supply (7) zones along axis of shell.
Details Add to Quote		86379	KILN AND CALCINER		2X19	2' dia x 19'6" long, Inconel 600 indirect rotary calciner. Mfd by Bethlehem Foundry and Machine, SN M162, Type indirect fired. Would take (28) burners - indirect fired. Unit good up to 2000 deg f. 17' long heating section. Mtd on trunnions, no drive, setup for chain drive. 11" feed opening and knocker on discharge end. No controls. Mtd on skid.
Details Add to Quote		107682	KILN AND CALCINER		18016	18" diameter x 16'8" long. 316LSS Renneburg Model #P77-106 rotary calciner. Has 6' long heating section and 5'6" long cooling section. Electric heated with tubular heating bars. Tire and trunnion mounted. Chain and sprocket driven by 3 HP, 3/60, 1750 rpm motor thru Cone 30:1 ratio right angle gear reducer. Has (2) 2,000 cfm @ 70 degree F exhaust fans, rated 2028 rpm, 3.57 brake HP.
Details Add to Quote		107686	KILN AND CALCINER		36040	36" diameter x 40' long Bartlett Snow rotary calciner. Serial Number 81109. 304SS contacts. Indirect fired, Has (4) heating zones as follows: 7' long (65 KW), 9' long (25 KW), 6' long (25 KW), and 6' long (12 KW). 8' long cooling zone with external water spray nozzles. 40' is the overall cylinder length. 1st zone is for drying at 150-200 degree C; 9' zone is for heating at 350-360 degree C; the last 2-zones are for calcining at 350-360 degree C. Tire and trunnions mounted. Chain and sprocket driven, designed for 2 to 10 RPM rotating speed.
Details Add to Quote		207269	KILN AND CALCINER		01006	6" ID diameter x 72" long Barlett-Snow Calciner, 1200 degrees F, with HH Alloy Tube, Manufactured by Bartlett-Snow-Pacific, Serial Number K5334. Skid mounted with the following overall dimensions: Length, 123" X width, 48" X height, 64". Heating area is 36" long with 4" insulation pack. Gas manifold contains seven jets, and is fed by a 3/4" inlet line. Heating chamber is exhausted by a 1 hp exhaust fan. Product hoppers and screw feed are 316 SS, inlet hopper is 8.5" X 11". Screw feed is 2" and driven by a 1/2 hp Browning motor. Calciner drive is by Seimens, 1750 rpm, and 2 hp.
Details Add to Quote		216265	KILN AND CALCINER		10 X 210	10' (125") X 210', CS, ROTARY KILN manufactured by Fuller (Boliden/Allis) Refractory Lined, Dual Fuel (Natural Gas/#2 Oil) Burner, 3/8" Slope per Foot, CW Rotation from Discharge End, 125 hp, 1,200 rpm, 1.5 rpm Kiln Speed, 30 mmbtu/hour Capacity, Right Angle 40 hp Diesel Emergency Drive, Coen BMS & Combustion Air Fan, Induced Draft, 15:1 Natural Gas Max Turn Down, 8: 1 #2 Oil Max Turn Down, 8 Tons/Hr Production Capacity, 80 psig, 100 SCFM Atomizing Air Flow, Down Hill from Thrust, Ircon Modline Plus Infrared Thermometer, Flat Blade Spinner, Enelco SC-11-11-3X9X24, Environmental Elements Corp Electrostatic Precipitator (ESP) with Single Chamber, Electric Rapping System, Inlet/Outlet Nozzles, Hopper Conveyor, Dust Valve, High Dust Level Alarm, 11 Gas Passages on 11" Centers, 3 Mechanical and 3 Electrical Fields, Rigitrode Discharge Electrode, Modulok Collecting Surfaces, Digicon Optipulse Microprocessor, Automatic Power Controllers, Top-Mounted Electronic Impulse Rappers; Falk 2150Y3-A Gear Reducer (s/n 9526487) 66.57:1 Ratio, New York Blower (NYB) 334 LS Series 20 Fan, 2001, 30 hp, 6,000 CFM, 27.3 BHP, Webbco Flex Steel Kiln Seals, Product Side Dust Collection with (6) Flex Kleen Dust Collectors, (100) 100" Nomex Bags/ea., (4) Flex Kleen Dust Collectors, (100) 100.5" Poly Bags/ea., (1) Flex Kleen Dust Collector, (16) 88" Poly Bags/ea., Assorted Screw Feed Conveyors, (2) Auto-Weigh #310-36" Feeder Scales, Flex Kleen Cooler Collectors, Flex Kleen Dust Reclaim, Flex Kleen Cooler Cyclone, Allis Chalmers Trunnions, Scott Turbine Mixing Tank, Documentation & Prints (#4)
Details Add to Quote		216266	KILN AND CALCINER		7 X 125	7' (84") X 125' , CS, ROTARY KILN manufactured by Vulcan. Refractory Lined, Hauck Dual Fuel (Natural Gas/#2 Oil) Single Burner, 3/8" Slope per Foot, CW Rotation from Discharge End, 75 hp, 1 rpm Kiln Speed, Gas Emergency Engine.
Details Add to Quote		216267	KILN AND CALCINER		10 X 165	10' (125") X 165' ROTARY KILN manufactured by F.L.Smidth . Refractory Lined, Dual Fuel (Natural Gas/#2 Oil) Burner, 3/8" Slope per Foot, CW Rotation from Discharge End, (4) 48" x 28" Trunnions, 24-3/4" x 151" Dia. Tires, 1 rpm Kiln Speed, Diesel Emergency Engine (#2)
Details Add to Quote		216268	KILN AND CALCINER		28 X 44	28' Diameter x 44' overall height, 2000 degree, CSE Hankin Multi Hearth Furnace. Manufactured by Hankin Environmental systems Inc.. With (8) Process Combustion Corp Dual Fuel (Natural Gas/#2 Oil) Burners, with nine hearth sections including (8) heating sections capable of obtaining 2000 degrees F. Designed to dry Kaolin at 4-8 tons per Hour. Each section hearth section has 4 rabble arms with with 10" teeth. Refractory lined and insulated. (see refractory key plan for details). Each hearth also has a 24" x 24" work door for internal access. 33" center shaft is driven by a Winsmith planetary speed reducer #61 H, 70.5:1 gear ratio, driven by a 25 hp variable speed frequency drive. Center shaft speed 1-3 rpm. Center shaft cooling fan is a Robinson Industrial size 29 5/8, CCW Type MHTF (SN # 3744-N) with a 20 HP TEFC AC Induction motor. Emergency cooling fan is the same size, and driven by a Continental WI TMD27, 27 hp Diesel Emergency Engine, Air for Comustion burners is supplied by (2) 75 hp Robinson RB1216 Fans, 40 x 5-15/16 Size, S/N 4991-N (#3) Unit is elevated 8' from grade. From the bottom of the unit to the top of section 9 is 40'. Assorted Screw Conveyors for product feed, and bucket elevator for discharge to silo.
Details Add to Quote		216412	KILN AND CALCINER		31	800 mm diameter Elino rotary drum furnace, 1000 degrees C, rated 500 - 750 kg/hr of copper oxide feedstock, drum speed approximately 1 to 6 rpm, variable by frequency converter. Mounted on a 3 degree slope. Furnace dimensions: 800 mm diameter x 11,500 mm heated drum length. With an indirect electric heating by wire-coil heating elements mounted on horizontal refractory supporting tubes installed on the sidewalls beside the drum. (8) Heating zones, with a total of 340 Kw. Fully automatic temperature control, by thermocouples and temperature controllers in (8) control zones in On-Off control configuration. Heating space temperature 1000 degree C; Feedstock input temperature approx. 20 degrees C, product discharge temperature 80 degrees C. Utility inputs: Nitrogen -approx. 50 NCu. M./ Hr @ 50 Mbar constant pressure; Compressed Air - Approx. 4 NCu. M./Hr @ 7 bar pressure permanently available; Process Exhaust gas - depending on the process. Electric power supply voltage 400 Volt, 3 phase, 50 Hz; control voltage 230V AC, 50 Hz.
Details Add to Quote		706261	KILN AND CALCINER		1026	600mm inner diameter x 8.2m long high Nickel/Chrome indirect gas fired Calciner with 2-heating zones, manufactured by Selas, approx production capacity 300 kg/hr, max product temperature 1050-1150 deg C, material of feed & discharge sections Z15.CN.20/10, material of middle section Z12.NC.35/25, heating length 4.1m long, 33-gas burners, drum 630mm O/D, drum chain driven by Leroy Somer geared motor with 5.5 kw, 3/50/220-380 volt, 1435 rpm motor with type CB-E2-SB3, 31.8:1 ratio reduction gearbox, drum speed 1.25-10 rpm, drum with angle adjustment mechanism, drum mounted on 2-sets of 760mm diameter trunnion wheels, thrust bearings on drum tyres, drum with hammers, drum enclosed with steel outer casing insulated with shaped ceramic blocks, feed chute, gas regulation system for temperature control and automatic cut off, unit all mounted on c/steel frame, Calciner with (1) c/steel inclined discharge water cooled screw conveyor/cooler, 200mm wide x 4m long x 300mm deep, driven by Leroy Somer geared motor with 1.1 kw, 3/50/220-240-380-415 volt, 1420 rpm motor with a type CB-2504-SB3, 364.8:1 ratio gearbox, (1) ABB Solyvent-Ventec fan, type HD-73H-RO-ARGT-4-RT-12, driven by 11 kw, 3/50/380-415 volt, 2930-2945 rpm motor,
Details Add to Quote		706262	KILN AND CALCINER		1026	600mm inner diameter x 8.2m long high Nickel/Chrome indirect gas fired Calciner with 2-heating zones, manufactured by Selas, approx production capacity 300 kg/hr, max product temperature 1050-1150 deg C, material of feed & discharge sections Z15.CN.20/10, material of middle section Z12.NC.35/25, heating length 4.1m long, 33-gas burners, drum 630mm O/D, drum chain driven by Leroy Somer geared motor with 2.2 kw, 3/50/220-380 volt, 1420-1435 rpm motor with type CB-2402-SB3, 31.5:1 ratio reduction gearbox, drum speed 1.25-10 rpm, drum with angle adjustment mechanism, drum mounted on 2-sets of 760mm diameter trunnion wheels, thrust bearings on drum tyres, drum with hammers, drum enclosed with steel outer casing insulated with shaped ceramic blocks, feed chute, gas regulation system for temperature control and automatic cut off, unit all mounted on c/steel frame, Calciner with (1) c/steel inclined discharge water cooled screw conveyor/cooler, 200mm wide x 4m long x 300mm deep, driven by Leroy Somer geared motor with 1.1 kw, 3/50/220-240-380-415 volt, 1420 rpm motor with a type CB-2504-SB3, 364.8:1 ratio gearbox, (1) ABB Solyvent-Ventec fan, type HD-73H-RO-ARGT-4-RT-12, driven by 11 kw, 3/50/380-415 volt, 2930-2945 rpm motor,