 |
|
Need Help? or Have something for sale? Use this:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Stock Number | 207372 |
| PG | KILN/CALCINER |
| SG | |
| SSG | |
| Capacity | 0 |
| Product Description | 600mm diameter x 13500mm long (approx.) Inconel 600/stainless steel indirect fired calciner, 250 kg/hr throughput, Manufactured by Riedhammer, Model DRA-8/60-E, serial # 85/4/039, Electrically heated by (4) 75 kw NiCr heating coils which are located underneath and at the side of rotary pipe, Max temperature 1150 deg C. heated pipe length 6.5m, brick lined kiln length 8m, total kiln length 15.5m, (3) regulation groups, connected load 300 kw, approx 175 kw energy consumption, kiln passage time 20-40 minutes, rotary tube in (3) section: 950mm s/steel section + 8300mm Inconel 600 section + 4300mm s/steel section, Inconel section only is heated, rotary tube is chain driven by 1.3 kw, 3/50/220/300/254/440 volt, 3475 rpm vari-speed geared motor, tube speed 0.25 to 3 rpm, kiln has a back-up diesel generator in case of power failure (keeps tube rotating to prevent deformation), complete unit mounted on c/steel frame with (4) legs (2 x legs have height adjustment), kiln is feed by approx 1.2m long x 100mm wide x 85mm deep s/steel vibratory conveyor with hopper, manufactured by JOST, type JD-50, 9.10 KG, 155 volt, 50 Hz, max temp 50 deg C, s/steel square design hopper 300mm wide x 300mm wide x 300mm straight side x 500mm high cone section, kiln discharges into a 500mm wide x 920mm long x 600mm deep s/steel hopper, with internal filter mesh and bottom mounted Spiroflow screw conveyor, conveyor with plastic tube and s/steel screw, 80mm diameter x approx 4m long, driven by an electric motor, conveyor with 100mm discharge, conveyor discharges into a 1 ton s/steel tote bin, 1m x 1m x 740mm deep, mounted on c/steel frame with castors, is also forkliftable, control panel is available. |
|
|
|
|
|
|
|
|