 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
Used Kilns and Used Calciners  Kilns and Calciners are high temperature process furnaces having a cylindrical shell, lined with a refractory brick to prevent overheating of the steel shell.
Kilns and Calciners are typically rated from 700 degrees F to 1400 degrees F – much higher temperature than a dryer. This is typically a continuous process, where the feed enters the kiln at one end and tumbles through as the kiln rotates, and is discharged though a cooling or quenches section. Kilns can be indirect fired, direct fired, electrically heated, gas heated, oil heated - and have a variety of feed and discharge configurations.
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
| 11 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 47096 | KILN/CALCINER | | 24021 | 24" ID x 21' long, Bartlett Snow 304SS indirect fired rotary calciner. Shop number K3729. Has 15'6" heating area and 5'6" cooling section. Gas fired from underneath calciner tube. One section has (3) gas burners w/Pedcock feeders every 6"; 2nd section has (2) gas burners w/Pedcock feeders every 6". (63) total feeders. Burners run parallel to length of calciner. Tube has internal flights. Brick lined external shell. Mtd on (2) tires w/trunnions and driven by Girth gear w/chain to gearhead motor, 2 HP, 3/60/230/460 volt motor, 25 rpm output. Skid mtd design w/feed and discharge hoods. Mtd on skid is Nash L2 vac pump, direct driven by 5 HP, 3/60/220/440 volt motor. |
|
|
| 73480 | KILN/CALCINER | | 1026 | UNUSED 18.4" (460mm) dia x 26'3" (8000mm) long nickel (2.4068) calciner. Mfd by Plant and Equipment Eng (Germany), SN A27146, Type AG22/11/DK94-241, blt 1988. Heating zone 24" (600mm) wide, cooling zone 17'9" (5400mm) long. Tube driven by 1.5 KW, 3/50/380 volt motor. Calciner is electrically heated within a brick housing. Maximal allowable temps are: for the outer walls of the tube heating body 1652 deg F (900 deg C), for the heating chamber 1472 deg F (800 deg C), for the tube 752 deg F to 842 deg F (400 deg C to 450 deg C). Electrical heating capacity 5 KW. Tube speed 1-5 rpm. |
|
|
| 83298 | KILN/CALCINER | | 99086 | 12'3" (3.74 meter) OD, (9'10" (3 meter) inside refractory) x 86' (26.3 meter) long CS direct fired rotary kiln. Rated capacity 3,300 ton/yr. Mfd by Babcock Krauss-Maffei. Temp 1200 deg C - 1300 deg C. Shell thickness 20mm, 114mm thick heat insulation lining and 250mm thick refractory. SS lifters and cast refractory lifters. Dual fuel (natural gas/oil) direct fired burners. Girth gear driven by variable speed drive, 1.48 rpm max. Unit has air driven emergency drive, .145 rpm max. Air supplied by diesel engine driven compressor. Kiln equipped w/on-board control panel used to sequence the actuation of the air injection valves and control the fans. Gas consumption kiln 6.6 cu meters/S, afterburner 3.8 cu meter/S. Steam fed via rotary coupling to manifolds mtd on outside of kiln shell and feed end. Controlled by remote operated valves which supply (7) zones along axis of shell. |
|
|
| 100191 | KILN/CALCINER | | 36034 | 36" x 34', 316SS indirect fired calciner. Mfd by Industrial Furnace/Finch Mfg, Type reverse retort. 4-zone heating. Electrically heated. 3/60/480 volt. Electrical heating input 348 KW, max temp 1000 deg F. Octagonal shell. 3/8" wall thickness. Driven by TB Woods 5 HP DC adjustable speed motor thru gear reducer. Shell speed 0-5 rpm. Tire and trunnion mtd. W/feed and discharge assemblies. |
|
|
| 100192 | KILN/CALCINER | | 36034 | 36" x 34', 316SS indirect fired calciner. Mfd by Industrial Furnace/Finch Mfg, Type reverse retort. 2.6MM BTU/hr input. 1300 deg F max temp. 4-zone heating. Gas fired Eclipse burner. Hexagonal shell. Tire and trunnion mtd. Shell driven by TB Woods 5 HP DC adjustable speed motor thru gear reducer. Screw feed driven by TB Woods 1 HP DC motor thru Dodge reducer w/SCR drive. W/Eclipse 7 1/2 HP blower, 70500 cfh. |
|
|
| 107682 | KILN/CALCINER | | 18016 | 18" diameter x 16'8" long. 316LSS Renneburg Model #P77-106 rotary calciner. Has 6' long heating section and 5'6" long cooling section. Electric heated with tubular heating bars. Tire and trunnion mounted. Chain and sprocket driven by 3 HP, 3/60, 1750 rpm motor thru Cone 30:1 ratio right angle gear reducer. Has (2) 2,000 cfm @ 70 degree F exhaust fans, rated 2028 rpm, 3.57 brake HP. |
|
|
| 107686 | KILN/CALCINER | | 36040 | 36" diameter x 40' long Bartlett Snow rotary calciner. Serial #81100. 316SS contacts. Indirect fired, Has (4) heating zones as follows: 7' long (65 KW), 9' long (25 KW), 6' long (25 KW), and 6' long (12 KW). 8' long cooling zone with external water spray nozzles. 40' is the overall cylinder length. 1st zone is for drying at 150-200 degree C; 9' zone is for heating at 350-360 degree C; the last 2-zones are for calcining at 350-360 degree C. Tire and trunnions mounted. Chain and sprocket driven. |
|
|
| 110548 | KILN/CALCINER | | 14026 | 14" diameter x 26' long indirect fired, electrically heated, high nickel/Inconel 601 tube calciner. Manufactured by CE Raymond, Serial #85051, Type #T50514, built 1986. 1800 degree F max. 12' long 4-zone heating section. Each zone is SCR controlled with 30 KW each with 0.430" dimater incoloy elements, and with original Controls, Controllers, and manuals. Tire and trunnion mounted on (2) 10" diameter x 6" face tires and (2) 10" diameter x 4" face tires. Cylinder chain and sprocket driven by Reeves motodrive, 3 HP, 3/60/230/460 volt, 1800 rpm TEFC motor. Size 243, Z-configuration. Rated 4.85 to 48.5 output rpm. Has 316SS agitated screw feeder 3' long x 20" deep. Agitator and screw driven by 1/2 HP, 3/60/230/460 volt, 1800 rpm TEFC Reeves motordrive. Size 053. 8/4 to 84 rpm output. Has 3' cooling section with schedule 40 galvanized steel manifold and (3) full jet nozzles 3/8 G22. Discharge end of calciner has rotary airlock valve, manufactured by Prater Model #PAV-6-C, chain driven by 1/2 HP, 3/60/230/460 volt, 1800 rpm TEFC motor. 29 rpm output. |
|
|
| 207269 | KILN/CALCINER | | 01006 | 6" ID diameter x 72" long Barlett-Snow Calciner, 1200 degrees F, with HH Alloy Tube, Manufactured by Bartlett-Snow-Pacific, Serial Number K5334. Skid mounted with the following overall dimensions: Length, 123" X width, 48" X height, 64". Heating area is 36" long with 4" insulation pack. Gas manifold contains seven jets, and is fed by a 3/4" inlet line. Heating chamber is exhausted by a 1 hp exhaust fan. Product hoppers and screw feed are 316 SS, inlet hopper is 8.5" X 11". Screw feed is 2" and driven by a 1/2 hp Browning motor. Calciner drive is by Seimens, 1750 rpm, and 2 hp. |
|
|
| 706261 | KILN/CALCINER | | 1026 | 600mm inner diameter x 8.2m long high Nickel/Chrome indirect gas fired Calciner with 2-heating zones, manufactured by Selas, approx production capacity 300 kg/hr, max product temperature 1050-1150 deg C, material of feed & discharge sections Z15.CN.20/10, material of middle section Z12.NC.35/25, heating length 4.1m long, 33-gas burners, drum 630mm O/D, drum chain driven by Leroy Somer geared motor with 5.5 kw, 3/50/220-380 volt, 1435 rpm motor with type CB-E2-SB3, 31.8:1 ratio reduction gearbox, drum speed 1.25-10 rpm, drum with angle adjustment mechanism, drum mounted on 2-sets of 760mm diameter trunnion wheels, thrust bearings on drum tyres, drum with hammers, drum enclosed with steel outer casing insulated with shaped ceramic blocks, feed chute, gas regulation system for temperature control and automatic cut off, unit all mounted on c/steel frame,
Calciner with (1) c/steel inclined discharge water cooled screw conveyor/cooler, 200mm wide x 4m long x 300mm deep, driven by Leroy Somer geared motor with 1.1 kw, 3/50/220-240-380-415 volt, 1420 rpm motor with a type CB-2504-SB3, 364.8:1 ratio gearbox, (1) ABB Solyvent-Ventec fan, type HD-73H-RO-ARGT-4-RT-12, driven by 11 kw, 3/50/380-415 volt, 2930-2945 rpm motor,
|
|
|
| 706262 | KILN/CALCINER | | 1026 | 600mm inner diameter x 8.2m long high Nickel/Chrome indirect gas fired Calciner with 2-heating zones, manufactured by Selas, approx production capacity 300 kg/hr, max product temperature 1050-1150 deg C, material of feed & discharge sections Z15.CN.20/10, material of middle section Z12.NC.35/25, heating length 4.1m long, 33-gas burners, drum 630mm O/D, drum chain driven by Leroy Somer geared motor with 2.2 kw, 3/50/220-380 volt, 1420-1435 rpm motor with type CB-2402-SB3, 31.5:1 ratio reduction gearbox, drum speed 1.25-10 rpm, drum with angle adjustment mechanism, drum mounted on 2-sets of 760mm diameter trunnion wheels, thrust bearings on drum tyres, drum with hammers, drum enclosed with steel outer casing insulated with shaped ceramic blocks, feed chute, gas regulation system for temperature control and automatic cut off, unit all mounted on c/steel frame,
Calciner with (1) c/steel inclined discharge water cooled screw conveyor/cooler, 200mm wide x 4m long x 300mm deep, driven by Leroy Somer geared motor with 1.1 kw, 3/50/220-240-380-415 volt, 1420 rpm motor with a type CB-2504-SB3, 364.8:1 ratio gearbox, (1) ABB Solyvent-Ventec fan, type HD-73H-RO-ARGT-4-RT-12, driven by 11 kw, 3/50/380-415 volt, 2930-2945 rpm motor,
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|