 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
203635
300 ton chiller designed to cool 40% Ethylene Glycol from 32 degrees F to 14 degrees F. Low temperature chiller skid manufactured by Frick (York International.) Frick # 292388. Designed to use R-22. This a complete skid mounted chiller including condenser, evaporate, and two (2) Frick RWBII-100E rotary screw compressors, designed for 350 psig high side, 300 psig low side, and each rated 298 BHP. Compressor A is a Model TDSH193S1746C, Ref. NH3/R22, Rated for max. speed of 4500 rpm. Max. Design pressure 362 psi. Compressor B is RWB II 100/100, serial # 30580MEMPTHAR2, ref. R22, Maximum speed is 3600 rpm. Max design pressure is 300 psi. Drivers are Reliance XE Premium Efficiency, 350 HP, 3570 rpm. ID # 1MAE73017. Rated for 3 ph, 60 Hz, 460 volts. Frame type 449TS. Comp. "A" 37490 Hours, Comp. "B" has 38193 hours. Evaporator is by Frick, NB # 109666, shell rated for 300 psi at 200 degrees F, Tubes not code. Built in 1993., Condenser is manufactured by Refrigeration Valves and systems, NB # 5428, Shell rated for 150 psi at 200 degrees F, tubes rated for 150 psi at 200 degrees F, Serial # 92945, Built 1993. Twin oil coolers are Frick NB # 109367, shell rated for 300 psi at 200 degrees F, tubes rated for 300 psi at 200 degrees F. Built in 1993. Complete skid mounted system with all piping and accessories. Controls are electronic, RWB II Plus, one for each compressor. Mounted in a stainless steel enclosure. Spare compressors are available.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
IPPE Equipment Seach
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 30 Items Returned | Go To Page: | 1 | 2 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 23268 | PACKAGING | FILLERS | | Votator filler base. Mdl P12L, SN 23268. Designed for plastic explosives. Base only. |
|
|
| 31159 | PACKAGING | FILLERS | | 304SS auger filler. Mfd by Precision Automation Co Inc. (6) pistons, 1 5/8" dia cups, 16" wide belt x 80" long. Hopper feed driven by 1/2 HP, 1750 rpm. Control system includes temp controllers. Unit mtd on (4) CS legs. |
|
|
| 31160 | PACKAGING | FILLERS | | 304SS auger filler. Mfd by Precision Automation Co Inc. (4) pistons, 2 1/2" dia cups. Hopper feed 15" wide belt x 80" long. Driven by 1/2 HP, 1750 rpm. Control system includes temp controllers. Unit mtd on (4) CS legs. |
|
|
| 31390 | PACKAGING | FILLERS | | Cozzoli F510 single piston filler. SN 55101169. |
|
|
| 31403 | PACKAGING | FILLERS | | Perry LF-6, SS piston filler. SN 1512. Fully automatic positive displacement inline filler capable of up to (120) containers per minute. Filling range: 1cc - 60cc. Container size range: .625" to 2.5" (15-65mm) dia x .625" to 3.0" (15-75mm) high. Unit is currently setup w/60cc pumps. Has guide rails and air stops designed for use over existing conveyor system. All SS contact parts. Electricals: 3/60/230/460 volts. |
|
|
| 88104 | PACKAGING | FILLERS | | SS can filling machine. |
|
|
| 94366 | PACKAGING | FILLERS | | Perry Mdl E-S-UA combination unscrambler, Mdl "E" accofil automatic powder filler, Mdl "PS" stopping unit and discharge accumulator. Up to 150 fills/min for single dose; up to 75 fills/min for double dose; up to 50 fills/min for triple dose. 50 mg to 1 1/2 gms w/single dose; 1 1/2 gms to 36 gms w/double dose; 36 gms to 4 1/12 gms w/triple dose. Dia 1/2" to 2 1/8"; height 1" to 4 1/2". 11mm, 13mm, 20mm or 30mm siliconed stoppers (w/interchangeable sterilizing assemblies). 1 1/2 HP variable speed drive, 3/60/230/460 volt. Also w/system is (1) used SS bottle conveyor 4' long x 3 1/4" wide, delrin plastic belt and 110 volt variable speed drive by Reliance; (1) used SS 90 deg bottle conveyor approx 5' long with 3 1/4" wide delrin plastic belt and 110 volt variable speed drive by Reliance; (1) used West capper, Mdl PW500F, Mach #798, 1/60/110 volt; (1) SS tray loader. |
|
|
| 97208 | PACKAGING | FILLERS | | Liquid filling station. 3-pc automatic roller conveyor 4' x 20' long. W/Toledo digital scale, Mdl #KC581018, SN 604252962F. W/controls for scale and conveyor. |
|
|
| 111078 | PACKAGING | FILLERS | | Packaging Systems International Model A valve packer with screw control for packing bags. With scale control by Flexweight Corp. type DWM-IV/NWF, Serial # F29556. Nm 10000, Class III/IIII. Bagging capacity: 5 bags per min. Scale: Weigh Tronics W1125, Serial # 027412, 200 lbs in 0.02 increments, 2" dust pick up, with 2' wide x 5'3" long roller conveyor, non powered, Inlet hopper is 15" x 12" with a 6 " downpipe at approx. 45 degree angle. Feed auger is belt driven by a Reuland AC motor rated for 3 hp at 1800 rpm, 3 ph, 60 Hz, 220/460 volts/ 8.8/4.4 amps. TEFC enclosure, Frame size 215. |
|
|
| 203560 | PACKAGING | FILLERS | | Bulk powder filling station and coveyor line for filling bulk boxes and drums.Manufactured by Packaging Systems International, Inc. Designed for Boxes: 1,100 lbs net, 1,270 lbs gross, Size 38" x 46" x 36" high, witha 40" x 48" x 5" high pallet; Drum size is 220 lbs net, 240 lbs gross, size 22" diameter x 38" high. System includes powder fill station, roller conveyor, Pallet handling station, and controls. All 3/60/460 volt electricals, 304SS product contact surfaces. Batch production rates 12,000 lbs, with a full capacity of 24,000 lbs. |
|
|
| 205074 | PACKAGING | FILLERS | 1 | 500 Gram coffee filling line Manufactured by HESSER - ROBERT BOSCH, Serial Number NR14600, with vacuum system; Tray packer Manufactured by - Kiener Skinetta, Serial Number TR 15Z 91; |
|
|
| 205075 | PACKAGING | FILLERS | 1 | Vacuum system for 500 Gram coffee filler Manufactured by - HESSER |
|
|
| 205076 | PACKAGING | FILLERS | 1 | Tray Packer for 500 gram Coffee filler Manufactured by - KIENER - SKINETTA, Serial Number TR 15Z 91 |
|
|
| 205080 | PACKAGING | FILLERS | 1 | 250 Gram coffee filling line, Manufactured by Hesser, Robert Bosch, Serial Number NR14600, with Vacuum system; Tray packer manufactured by Kiener Skinetta; Palletizer (Stock # 205083) manufactured by Oli, serial number 008698-1; and Control Center. All 400 V / 50 Hz / 20 A / DC 24 V / 6 bars |
|
|
| 205081 | PACKAGING | FILLERS | 1 | Vacuum system for 250 Gram coffee filler Manufactured by - HESSER |
|
|
| 205082 | PACKAGING | FILLERS | 1 | Tray Packer for 250 gram Coffee filler Manufactured by - KIENER - SKINETTA, Germany |
|
|
| 205083 | PACKAGING | FILLERS | 1 | Palletizer for the 250 gram filling line, Manufactured by - OLI,Serial Number008698-1. Part of Stock # 205080 |
|
|
| 205094 | PACKAGING | FILLERS | 1 | 190 to 500 gram Rowema vertical forming, filling and sealing machine, type VP, machine # 4031, Serial Number 36/4, built on control panel, vari-speed, with a top mount s/steel type SD-OS auger doser/filler, serial #10/19 and s/steel screw feeder |
|
|
| 205095 | PACKAGING | FILLERS | 1 | 1 KG, ICA vacuum filling line, Serial Number V1584, with vacuum system; Box packer manufactured by Menegatti, Serial Number RCS 90046, and a multi packer manufactued by MAF, Serial number 892281. All 3 PH/50 HZ/ 400 V |
|
|
| 205096 | PACKAGING | FILLERS | 1 | Vacuum System for 1 kg filler , Manufactured by ICA, Serial NumberV1584 |
| 30 Items Returned | Go To Page: | 1 | 2 |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|