 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
IPPE Equipment Seach
Enter a product number or part of its description below and click SEARCH
Finally, you may filter the results based on capacity below
| 1 Items Returned | Go To Page: | 1 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 107156 | PLANT | WATER TREATMENT | 28000 | 20 gpm 316SS skid mounted water treatment plant. Manufactured by AWD Technoligies, built 1992. Major components include the following: (3) 6.67 gpm @ 155'TDH, CS groundwater well pumps. Size 1x8. Driven by 1/3 HP, 1/60/115 volt, 3600 rpm motors. Discharge pressure 76.7 psi @ 65 degree F. (1) 316SS inlet water filter. Size 4" x 18". 100 micron. Pressure drop .04 psi @ 20 gpm. Design pressure 150 psi @ 150 degree F. (1) 1,700 gallon Derkane 470 groundwater feed tank. (1) 20 gpm @ 85'TDH, CS influent pump. Size 1 1/2 x 1 x 4.8. Discharge pressure 38.5 psig @ 65 degree F. Direct driven by 7 1/2 HP, 3/60/480 volt, 3600 rpm motor. (1) 62 square feet 316SS overhead condenser. Size 8-96, Type AEL. Shellrated 50 psi and full vacuum @ 400 degree F, tubes rated 150 psi @ 400 degree F. (1) 10 gpm @ 40'TDH, overhead condensate pump. Size 1 x 3/4 x 3 5/8. 7.9 psi @ 70 degree F discharge pressure. Direct driven by 1 1/2 HP, 3/60/460 volt, 3600 rpm motor. (2) 281 square feet CS cross shell and tube heat exchanger. Size 2 x 10-240, Type BEM. Shell rated 150 psi and full vacuum @ 400 degree F, tubes rated 150 psi and full vacuum @ 400 degree F. (1) 52 acfm @ 1.49 psia 316SS vacuum pump. Direct driven by 7 1/2 HP, 3/60/480 volt, 1750 rpm motor. (1) 12" diameter x 45' high CS stripper column. Rated 50 psi and full vacuum @ 400 degree F. (1) 800 lbs/hr @ 75 psi packaged steam generator. (1) 13 square feet 316SS tube, CS shell regenerating steam condenser. Tubes rated 75 psi @ 350 degree F, shell rated 75 psi @ 650 degree F. (1) 370 gallon CS hydrocarbon phase separator. Rated 50 psi @ 400 degree F. (1) gallon CS hydrocarbon receiving tank. Rated 150 psi and full vacuum @ 400 degree F. (2) gallon 316SS grannular activated carbon beds. Rated 107 psi and full vacuum @ 650 degree F. Each carbon bed requires 283 lbs charge. |
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|