 |
|
Need Help? or
Have something for sale? USE THIS FORM:
|
|
|
|
|
|
|
|
Chillers
|
 |
|
|
|
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
|
| |
|
|
|
|
|
|
|
|
|
|
Enter a product number or part of its description below and click SEARCH
OR
Now choose a product sub group (if any are present below)
| 54 Items Returned | Go To Page: | 1 | 2 | 3 |
|
| | | Stock Number | Product | Sub Group | Capacity | Description |
|
|
| 88678 | PLANT | OXYGEN | | 116 metric ton/day oxygen plant. Designed by Linde. Capacity oxygen 3,100 Nm3/hr, 99.5% purity; nitrogen 98% purity. Major equipment includes: (1) Worthington air compressor, Size GU4NHG, SN 1544458-9, 990000 scfh @ 14.7 psia @ 70 deg F dry, 14.3 psia suction pressure, 99.4 discharge pressure. 7500 rpm, BHP 2950. Driven by 3000 HP, 3/60/1200 rpm synchronous motor thru Electric Mach step-up gear reducer, Size 25x14-1/2, ratio 1200/7505. (2) expansion turbine, mfd by Rotoflow, Mdl 22-4M6J. Design horsepower 93.8, 31000 rpm shaft speed, SN 18317. Inlet 76.9 psig, discharge 7.2 psig. Air flow rate 251,000 scfh, 14.7 psia @ 70 deg F. (3) expansion turbine, mfd by Stratos Div, Mdl TVXL-170. Design horsepower 60, 32500 rpm shaft speed, inlet pressure 72 psig, outlet pressure 6 psig, 80% efficiency. Reversing heat exchangers and silencer and distillation columns mfd by Linde. Plant includes main instrument control panel and analyzers. |
|
|
| 98850 | PLANT | CHEMICAL | | ****24 MT/day catalytic batch hydrogenation and catalyst filtration plant. Process description: catalyst hydrogenation of dichloronitrobenzene to dichloroaniline in toluene solvent, used in production of herbicides. Design based on (8) batches/day. System consists of: 1) reaction loop: 2.9 cu meter batch size, operating pressure 40 bar @ 120 deg C. 2) secondary loop (heating/cooling): operating pressure 11 bar @ 150 deg C. 3) catalyst filtration: 2 sq meter, operating pressure 6 bar @ 40-120 deg C. Precious metal on charcoal. Major equipment: (1) Buss loop reactor, 2.9 cu mter, 120 deg C, 40 bar, batch design, 316LSS, 316TI stabilized construction, full pipe coil. Total capacity internal 2980 liters, coil 30 liters. (1) 2 sq meter Funda filter, 60 liter max cake capacity, operating pressure 5 bar @ 40-120 deg C. Modicon PLC based control system. Designed by Buss. Utilites needed: hydrogen, 95% H2 max 1000 NM3/H @ 43 bar; saturated steam max 2000 Kg/H @ 3 bar; cooling water approx 120 cu meter/hr; electric power approx 100 KW, 3/50/415 volt; inert gas approx 100 cu meter/hr @ 5 bar; instrument air approx 10 cu meter/hr @ 5 bar. |
|
|
| 107156 | PLANT | WATER TREATMENT | 28000 | 20 gpm 316SS skid mounted water treatment plant. Manufactured by AWD Technoligies, built 1992. Major components include the following: (3) 6.67 gpm @ 155'TDH, CS groundwater well pumps. Size 1x8. Driven by 1/3 HP, 1/60/115 volt, 3600 rpm motors. Discharge pressure 76.7 psi @ 65 degree F. (1) 316SS inlet water filter. Size 4" x 18". 100 micron. Pressure drop .04 psi @ 20 gpm. Design pressure 150 psi @ 150 degree F. (1) 1,700 gallon Derkane 470 groundwater feed tank. (1) 20 gpm @ 85'TDH, CS influent pump. Size 1 1/2 x 1 x 4.8. Discharge pressure 38.5 psig @ 65 degree F. Direct driven by 7 1/2 HP, 3/60/480 volt, 3600 rpm motor. (1) 62 square feet 316SS overhead condenser. Size 8-96, Type AEL. Shellrated 50 psi and full vacuum @ 400 degree F, tubes rated 150 psi @ 400 degree F. (1) 10 gpm @ 40'TDH, overhead condensate pump. Size 1 x 3/4 x 3 5/8. 7.9 psi @ 70 degree F discharge pressure. Direct driven by 1 1/2 HP, 3/60/460 volt, 3600 rpm motor. (2) 281 square feet CS cross shell and tube heat exchanger. Size 2 x 10-240, Type BEM. Shell rated 150 psi and full vacuum @ 400 degree F, tubes rated 150 psi and full vacuum @ 400 degree F. (1) 52 acfm @ 1.49 psia 316SS vacuum pump. Direct driven by 7 1/2 HP, 3/60/480 volt, 1750 rpm motor. (1) 12" diameter x 45' high CS stripper column. Rated 50 psi and full vacuum @ 400 degree F. (1) 800 lbs/hr @ 75 psi packaged steam generator. (1) 13 square feet 316SS tube, CS shell regenerating steam condenser. Tubes rated 75 psi @ 350 degree F, shell rated 75 psi @ 650 degree F. (1) 370 gallon CS hydrocarbon phase separator. Rated 50 psi @ 400 degree F. (1) gallon CS hydrocarbon receiving tank. Rated 150 psi and full vacuum @ 400 degree F. (2) gallon 316SS grannular activated carbon beds. Rated 107 psi and full vacuum @ 650 degree F. Each carbon bed requires 283 lbs charge. |
|
|
| 210983 | PLANT | | 10000 | 10 megawatt power facility including boiler,steam turbine, generator and condenser. Boiler manufactured by Deltek, recently re-tubed. Rated for 125,000 lbs steam per hour at 725 psi. Heating surface square footage is 16,189. Burner is capable of handling Natural Gas or Methane as the fuel. Steam Turbine rated for 101,000 lbs./hr. at 600 psi for 750 degrees F., and includes an electronic Woodward governor. Reduction gear by Tacke, rated for 6,200 rpm in and 1,800 rpm out. Generator is manufactured by Ideal Electric Company and is rated at 10MW, 11,647 kVA, 4160 volt at 1800 rpm & 60 Hz. With brushless exciter. Condensing is handled by a 7,809 sq. ft. Grahm exchanger, featuring admiralty brass tubes. Condenser is rated for 88,100 lbs./hr. exhaust, 86 mm BTU/HR. duty and requires 6,880 gpm of cooling water. Complete with all support equipment, including pumps, water systems, blowers,etc. Complete control room available with operational control panels featuring controls by Panalarm, Foxboro, Bently Nevada, and Bassel.Starters and switch gear by Siemens, is also available. |
|
|
| 213148 | PLANT | | 0 | Airco Kryoclean, low temperature cyogenic air abatement system. System uses Low temperature nitorgen, -160 degrees F, Skid mounted design. |
|
|
| 600016 | PLANT | | 0 | Amines Derivatives Facility-Facility consists of (6) units: CO/H2 Production unit; Methyl Amines (MA, DMA, TMA) Plant, 46 kMTA; Higher Amines Plant, 24 kMTA; Dimethyl Formamide (DMF) Plant, 24 kMTA; Dimethyl Amine Ethanol (DMAE) Plant, 7 kMTA; Choline Chl |
|
|
| 600067 | PLANT | | 0 | Complete Flavor and Fragarence plant available with real estate. |
|
|
| 600091 | PLANT | | 0 | Coffee Roasting, Grinding and Packaging Plant-Late model coffee roasting, grinding and packaging plant. All lines are still operating and major overhauls were made every second year. Spare parts for most major equipment available., For complete descriptio |
|
|
| 600218 | PLANT | | 0 | Copy Toner Plant-1200 MTPY, Capacity - 1200 mtpd - See Plant database for more info |
|
|
| 600225 | PLANT | | 0 | Oxygen VSA Plant-200 Nm3/hr, Capacity - 200 Nm3/hr |
|
|
| 600251 | PLANT | | 0 | Synthetic Chemical plant - See Plant database for more details |
|
|
| 600263 | PLANT | | 0 | 15,000 TPY Maleic Anhydride Plant - See Plant Database for more details |
|
|
| 600270 | PLANT | | 0 | PVC Plant - See Plant Database for more details |
|
|
| 600273 | PLANT | | 0 | Methyl Amines Plant-46,000 MTA - See Plant databse for more details |
|
|
| 600274 | PLANT | | 0 | Higher Amines-24,000 MTPY |
|
|
| 600275 | PLANT | | 0 | Dimethyl Formamide-24,000 MTPY |
|
|
| 600276 | PLANT | | 0 | DimethylaminoEthanol-7,000 MTPY |
|
|
| 600308 | PLANT | | 0 | Spheripol Polypropylene-220,000 MTPY plant |
|
|
| 600365 | PLANT | | 200000 | 200,000 MTPY, Continous Polyester Resin (PET) Processing Line, Low Energy Consumption, Cleaner PET due to "wiped wall technology", Low turnaround frequency, Considerable flexibility for additives , Built 1997, (CP100). |
|
|
| 600369 | PLANT | | 0 | Fatty Acids Complex |
| 54 Items Returned | Go To Page: | 1 | 2 | 3 |
|
|
|
|
|
IPP Sales Contacts
|
|
|
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931 | Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929 | Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928 | Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043 | Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax | Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax | Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax | Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927
|
|
|
|
|
|
|
|