RegisterLogin
Need Help? or
Have something for sale? USE THIS FORM:
First Name:  
Last Name:  
Email Address:  
Company Name:  
Telephone:  
Country:  
Question:  
 
     

Chillers Minimize
Equipment Rotator image
Equipment Rotator image 1 of 10 Equipment Rotator imageEquipment Rotator imageEquipment Rotator image
207432
125 Ton , Zero Degree Glycol chiller, Manufactured by FES, model # 19ME. Serial # 94623042. Chiller use's 1250 lbs. of R-22 refrigerent. Skid mounted with FES digital micro control panel. Compressor is by FES and exchangers are by FES, and Thermo Power-York. National Board # 9177, MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F. Compresssor driven by a 300 hp, 4160 volt, 3575 rpm motor.Glycol Flow= 500 GPM, colling water flow= 500 gpm, Inlet temp.= 10-15 degrees F. Outlet temp. is delta 10 Degrees F.
Read More...
 
  

 

Used Pumps

Used Pumps - Used Processing Equipment

Pumps move liquids. All process plants have pumps. The types of pumps include centrifugal, hydraulic, rotary, reciprocating, and vacuum pumps.

The capacity of a pump is defined by the amount of fluid passing through the unit rated in GPM (Gallons per Minute), and the discharge pressure rated at Head Feet. The head is the height of the column of fluid that the pump can push.

Types of pumps:

  • Centrifugal pumps - the most widely used pumps in processing plants are Centrifugal pumps. They consist of an impellor rotating within a casing
  • Reciprocating pumps – positive displacement pumps that have a higher efficiency than centrifugal pumps. The classes of reciprocating pumps include piston pumps, plunger pumps, and diaphragm pumps.
  • Rotary pumps - In rotary pumps mechanical displacement of the liquid is produced by rotation of one or more members within a stationary housing. This type of pump includes gear pumps that have two impellors in a housing for thicker liquids, Moyno pumps which are progressive cavity pumps, and screw pumps.
  • Hydraulic pumps – designed to generate fluid power.
  • Vacuum pumps - designed to pull vacuum.
    • Water seal vacuum pumps (Nash, Kinney, SiHi) use water to create suction. These produce some vacuum with higher CFM flow.
    • Oil seal vacuum pumps (Kinney, Stokes, Huckepack, Reictsche) provide very high vacuum
    • Dry seal vacuum pumps (Busch) provide high vacuum

Equipment Search

IPPE Equipment Seach


Enter a product number or part of its description below and click SEARCH
  Search View Quote Contents


Finally, you may filter the results based on capacity below

    Narrow Results by Capacity

Add Checked to Quote
 Add to Quote Before Changing Page

1179 Items ReturnedGo To Page: 12345678910...
  Stock NumberProductSub GroupCapacityDescription
Details
IPP Equipment Search Image 6722PUMPCENTRIFUGAL 55 gpm @ 200' TDH, 1 1/2" x 1 1/2", Sihi SS centrifugal self-priming pump. Mdl AOHA3101, SN BNO21424. No motor, takes 3 HP.
Details
IPP Equipment Search Image 8106PUMPCENTRIFUGAL 25UNUSED 2-1/4" x 2-1/4" Viking CS centrifugal pump, Model K-124R. On CS base. With 3/60/230/460 volt, 1160 rpm motor. Steel construction.
Details
IPP Equipment Search Image 10863PUMPCENTRIFUGAL 500500 gpm @ 100' TDH. 4" x 3" Durco 316 SS centrifugal pump. -1: Model HHJ3WR00114, SN 75870; -2: HHJ3WR00130, SN 84924. SS jacket. 11 1/2" diameter open impellor. With mechanical seal. With 30 HP, 3/60/220/440 volt, 1800 rpm motor.
Details
IPP Equipment Search Image 10872PUMPCENTRIFUGAL 160160 gpm, 2" x 1 1/2" Durco SS centrifugal pump. Model HHCD2WR0C94 SN 75863. SS jacket. With mechanical seal. Direct coupled to 7.5 HP, 3/60/220/440 volt, 1750 rpm TEFC motor.
Details
IPP Equipment Search Image 10907PUMPCENTRIFUGAL 2020 gpm, 3" x 2", Durco 316SS centrifugal pump. Mdl HH2G2WROC94. SN: -1,75845; -2,75841. 316SS jkt. W/mech seal. Motor: -1, direct coupled to 15 HP, 3/60/220/440 volt, 1770 rpm TEFC motor; -2, direct coupled to 10 HP, 3/60/220/440 volt, 1770 rpm TEFC motor.
Details
IPP Equipment Search Image 10911PUMPCENTRIFUGAL 7575 gpm @ 80' TDH, 2" x 1 1/2" Durco 316 SS centrifugal pump. Model HHD2WR0C94, SN 75877. SS jacket. With mechanical seal. Direct coupled to 7.5 HP, 3/60/230/460 volt, 1740 rpm TEFC motor.
Details
IPP Equipment Search Image 10932PUMPCENTRIFUGAL 50005000 gpm @ 5'TDH. 18" x 18" Lawrence 304 SS centrifugal pump. With mechanical seal. Direct coupled to 15 HP, 3/60/440 volt, 1750 rpm motor, UL label, Frame 284U.
Details
IPP Equipment Search Image 10955PUMPCENTRIFUGAL 2020 gpm @ 430' TDH, 2" x 1 1/2" Fairbanks Whitney CI centrifugal pump. Model CR415. Driven by Turbin Coppus TF-12, 10 HP, 3600 rpm.
Details
IPP Equipment Search Image 10962PUMPCENTRIFUGAL 120120 gpm @ 375'TDH. 6" x 3" Fairbanks Morse CS horizontal splitcase centrifugal pump. Model 16L. 9 7/8" diameter impellor. 1-stage, size 2. Driven by a Coppus turbine, 30 HP, 3550 rpm. Turbine Model 6BT2409, Type TF. Mounted on base.
Details
IPP Equipment Search Image 10963PUMPCENTRIFUGAL 396396 gpm @ 250' TDH. 6" x 4' Ingersoll Rand cast iron 2-stage horizontal centrifugal pump. Size 4GTS, SN 0570613. With bronze impellor. Direct coupled to 50 HP, 3/60/220/440 volt, 1770 rpm TEFC motor.
Details
IPP Equipment Search Image 10978PUMPCENTRIFUGAL 1515 gpm @ 83' TDH @ 1750 rpm, 2" x 1" Durco Alloy D4 centrifugal pump. Size 2 x 1 x10, SN 120070. With mechanical seal. With jacket. 2 HP, Induction 3/60/220/440 volt, 1735 rpm motor, UL label.
Details
IPP Equipment Search Image 10981PUMPCENTRIFUGAL 330330 gpm @ 78.6 psia, 4" x 3", Lawrence 316 SS centrifugal pump. SS jacket. With mechanical seal. Direct coupled to 10 HP, 3/60/230/460 volt.
Details
IPP Equipment Search Image 10987PUMPCENTRIFUGAL 150150 gpm @ 8' TDH, 2 1/2" x 2" Aurora CS centrifugal pump. Type BCP, Size 2 x 2.5 x 10, SN B652336. With mechanical seal. Direct coupled to 7.5 HP, 3/60/220/440 volt, 1800 rpm TEFC motor.
Details
IPP Equipment Search Image 10988PUMPCENTRIFUGAL 504" x 3" x 8" Worthington CS centrifugal pump. Mdl 1012, SN Y637763. Direct coupled to 50 HP, 3/60/220/440 volt, 3565 rpm TEFC motor. Mtd on base.
Details
IPP Equipment Search Image 11025PUMPCENTRIFUGAL 5050 gpm @ 1326'TDH, 3" x 3", Sundyne 316SS centrifugal pump. Mdl LM3V11, SN 3684. W/Sundyne gear box, increases speed from 3550 rpm input to 13,600 rpm output. Max rating 200 HP. W/40 HP, General Electric 3/60/230/460 volt, 3540 rpm motor.
Details
IPP Equipment Search Image 11039PUMPCENTRIFUGAL 753" x 2" Sundyne 304SS vert centrifugal pump. SN 4443. W/Sundyne speed increaser. Gearbox rated 3550 rpm input, 8200 rpm output. W/75 HP, 3/60/230/460 volt, 3550 rpm motor.
Details
IPP Equipment Search Image 11056PUMPCENTRIFUGAL 100100 gpm @ 70' TDH. 4" x 3" Worthington CS centrifugal pump. Model MD2HN122, SN 1608419. 13 3/4" diameter impellor. With 15 HP, 3/60/22/440 volt, 1750 rpm motor. Mounted on base.
Details
IPP Equipment Search Image 11626PUMPCENTRIFUGAL 20000UNUSED spare parts for DeLaval pump #9588 & 11625. Including (1) DeLaval spare rotor for feed water pump (800 lbs) and DeLaval parts for feedwater pump (4,000 lbs).
Details
IPP Equipment Search Image 11628PUMPCENTRIFUGAL14800UNUSED 14,800 gpm Babcock & Wilcox horiz pump. Designed as cooling pump. Mdl 18x20x26 DGM, 210 TDH, 1180 rpm. Design pressure 150 psig, temp 200 deg F, 946 BHP. Horiz inlet and outlet. Cast tin bronze impellor ASTM B584(905), CR-MO alloy steel shaft ASTM A322.
Details
IPP Equipment Search Image 11629PUMPCENTRIFUGAL14000UNUSED 14,000 gpm Babcock & Wilcox horiz pump. Designed as cooling pump. Mdl 18x20x26 DGM, 210 TDH, 1180 rpm. Design pressure 150 psig, temp 200 deg F, 946 BHP. Horiz inlet and outlet. Cast tin bronze impellor ASTM B584 (905), CR-MO alloy steel shaft ASTM A322.
1179 Items ReturnedGo To Page: 12345678910...

Add Checked to Quote
 Add to Quote Before Changing Page
  

IPP Sales Contacts Minimize
Keith West
Global Sales
KeithW@ippe.com
+1 609 838 5931
Amanda Vagell
Global Sales
AmandaV@ippe.com
+1 609 838 5929
Patti Buchman
Global Sales
PattiB@ippe.com
+1 609 838 5928
Ray Wagner
Global Sales
RayW@ippe.com
+1 609 838 6043
Regina Zarmer
Europe Sales & Acquisitions
ReginaZ@ippe.com
+49-306-594-2445 Office
+49-172-313-8439 Mobile
+49-30-6594-2448 Fax
Jo Petrie, Sales Engineer
UK, Scandinavia, Spain, & So.Africa
jop@ippe.com
+44 (0)1642 367 910 Office
+44 (0)1642 367 913 Direct
+44 (0)7770 748884 Mobile
+44 (0)1642 367 920 Fax
Bohumil Cuta,
E. Europe
Sales & Acquisitions
BohumilC@ippe.com
+42-054-821-6680 Office
+42-060-273-7517 Mobile
+420-5-481-22240 Fax
Elisa Lucumi
Central &
So. America Sales
ElisaL@ippe.com
+1 609 838 5927

     

Home | About Us | Equipment Search | Plant Search | Industrial Real Estate | Sell to IPP | News | Media | Contact Us
  Copyright 2002-2012 International Process Plants   Terms Of Use  Privacy Statement   
The European Petrochemical Association International Fertilizer Industry Association Institute of Scrap Recycling Industries, Inc. National Demolition Association National Demolition Association Turnaround Management Association Association Memberships
Bookmark and Share

Follow Us On Twitter View Our Channel on YouTube